commands: spi: Fix spi read procedure ...

Buffer for RX is set incorrectly.

barebox@Phytec phyCORE-i.MX27:/  spi -r 128 -v
device config
    bus_num       = 0
    max_speed_hz  = 1000000
    chip_select   = 0
    mode          = 0x0
    bits_per_word = 8

wrote 0 bytes
00000000:
read 128 bytes
00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00    ................
00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00    ................
00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00    ................
00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00    ................
00000040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00    ................
00000050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00    ................
00000060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00    ................
00000070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00    ................
unable to handle paging request at address 0x4dffd3d0
pc : [<a7f05ec4>]    lr : [<a7f05ebc>]
sp : a7fff890  ip : a7fff860  fp : a7f68820
r10: a6ffe9bc  r9 : 00000000  r8 : 00000001
r7 : a6ffe9ec  r6 : a6f00000  r5 : a6ffe9ec  r4 : a6ffe9e4
r3 : a6ffe9e4  r2 : a6ffe9e5  r1 : a6ffe9e4  r0 : 4dffd3cc
Flags: nZCv  IRQs off  FIQs off  Mode SVC_32
...

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next-manual/oftree-linux-sync'

Merge branch 'for-next/usb'

Merge branch 'for-next/misc'

Merge branch 'for-next/memtest'

Merge branch 'for-next/debug'

Merge branch 'for-next/bootm'

ubiformat: check file size ...

If size of a flash image file is 0 ubiformat silently formats the volume.
Check size and abort if size == 0. This may be the case if an empty or tftp
mounted file is used.

Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

remove unused debug Kconfig options ...

ENABLE_DEVICE_NOISE is used only in two network drivers and is
otherwise unused. ENABLE_FLASH_NOISE is completely unused.
ENABLE_PARTITION_NOISE enables DEBUG in the partition command,
but this code has no debug messages at all.

Remove all this.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

detect command: Add -a option to detect all devices ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

usb: move scanned status into core ...

A command should not be interested in the internal USB core state, so
move the state handling into the core.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

OF: base: sync of_find_node_by_path with linux OF API ...

Barebox of_find_node_by_path requires a node to be passed as start node
to start searching. Linux OF API does not pass this node and no current
user of it in barebox is passing anything else than the root node.
Therefore, we rename current function to of_find_node_by_path_from and
introduce a Linux OF API compatible of_find_node_by_path that always
passes the current root_node. Also, all current users of that function
are updated to reflect the API change.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

OF: base: sync of_find_property with linux OF API ...

To start synchronizing OF API of barebox with linux OF API, this adds
a length pointer to of_find_property. Also all current users of that
function are updated to reflect the API change.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>

bootm: factor out code to make it usable from C ...

Much of the bootm code is implemented in the command itself. Move
it to a common place to be able to call it from C aswell.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: add new memtest command ...

This new memtest can test the whole unused memory. The new memtest
command try to request the whole unused sdram regions on all banks and
run the mem_test routine from common/memtest.c on it.

The memtest command has only two parameters;
  -i	Amount of iterations, default 1, iteration of 0 is endless.
  -b	Set this to skip integrity check.(Do only a fast test for bus lines)

If MMU support is enable, memtest try to run memtest twice. The first with
cache enabled, the second with cache disabled.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

memtest: remove memtest command ...

Remove memtest command.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Remove a redundant line. ...

Signed-off-by: Masaki Muranaka <monaka@monami-ya.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/of'

bootm: Print internal devicetree information without verbose ...

It's a precious information that barebox will boot the kernel
with the internal devicetree, so print it even in non verbose
mode.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

devices: add detect mechanism ...

We often encounter the situation where slow devices should not be
probed during startup since probing is slow and maybe unnecessary
for unused devices. With MMC we have the 'probe' device parameter,
for ata we have the same, for USB we have the 'usb' command. Overall
this is not very consistent.
With MMC there is the additional problem that the probe parameter
is attached to the logical device when we often have the information
which physical device we want to probe.
This patch adds a 'detect' callback for devices and adds a command
to detect devices and to list the devices which are actually detecable.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

bootm: make sure to print fixed oftree ...

when doing bootm -v -v we dumped the original tree to the console.
Make sure to print the fixed tree instead so that the fixups can
be examined.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands/mem.c: drop non used DEVMEM ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/misc'

Merge branch 'for-next/memory-commands'

Don't honor initrd load address ...

U-Boot doesn't honor the load address specified in an initrd. Barebox
shouldn't be more strict here. This unbreaks booting an uInitrd
generated by Debian's flash-kernel that uses 0 as entry address where
there is nothing on the i.MX53 that was used.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

bootm: Simplify initrd address handling ...

data.initrd_address = UIMAGE_SOME_ADDRESS;
	...
	if (-L was given to bootm)
		data.initrd_address = address_provided_to_-L;
	...
	if (initrd is provided as uInitrd && data.initrd_address == UIMAGE_SOME_ADDRESS)
		data.initrd_address = load_address_from_uInitrd;
	...
	if (data.initrd_address == UIMAGE_SOME_ADDRESS)
		data.initrd_address = UIMAGE_INVALID_ADDRESS;

can be simplified to:

	data.initrd_address = UIMAGE_INVALID_ADDRESS;
	...
	if (-L was given to bootm)
		data.initrd_address = address_provided_to_-L;
	...
	if (initrd is provided as uInitrd && data.initrd_address == UIMAGE_INVALID_ADDRESS)
		data.initrd_address = load_address_from_uInitrd;
	...

The only change introduced by this simplification is for cases where the
user passes -L UIMAGE_SOME_ADDRESS or -L UIMAGE_INVALID_ADDRESS to
bootm. (-L UIMAGE_SOME_ADDRESS is now used literally instead of ignored
before. -L UIMAGE_INVALID_ADDRESS used to skip getting the
initrd-address from the uInitrd, now the uInitrd address is honored.)

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: property: fix error message ...

At least in standard oxford english one not is enough.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ubimkvol: Typo fix ...

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Add memory modify command (mm) ...

As of now we have no way to manipulate individual bits of registers on the
command line. This introduces a memory modify command which allows this. It
has the syntax:

mm [OPTIONS] <adr> <val> <mask>

With [OPTIONS] being the usual memory command options (-b, -w, -l, -d <file>).

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

memory commands: separate into one file per command ...

Normally in commands we have one file per command which is named like
the command itself. The memory commands are an exception to this. This
patch changes this by separating the memory commands. This also has the
effect that the memory commands can now be selected individually. Along
the way we add some Kconfig help text for the commmands.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>