LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

History for barebox / drivers

2013-12-20	d7fe5e2 Browse files » mtd: Add subpagesize to mtd_info_user ... ubiformat needs the subpagesize to work correctly. The kernel uses sysfs to pass the subpagesize, but in barebox we have the possibility to extend struct mtd_info_user. Add a corresponding field and use it in ubiformat. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 20 Dec 2013
	080a4e9 Browse files » mtd: fix mtd_read return value ... mtd->read returns the number of bitflips as positive numbers. Instead of returning these numbers Return -EUCLEAN when the bitflip threshold has been reached, 0 otherwise. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 20 Dec 2013
	a8fd9bf Browse files » mtd: fix wrong return values in cdev read ... mtd->read returns the number of bitflips as positive numbers. Instead of returning these numbers Return -EUCLEAN when the bitflip threshold has been reached, 0 otherwise. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 20 Dec 2013
2013-12-19	26f2c81 Browse files » mtd: nand_imx: remove trailing whitespaces ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 19 Dec 2013
2013-12-19	7ef217b Browse files » nand_imx: fix read ONFI param on NFC v21 ... tested on an i.MX25 where we now get : nand: ONFI param page 0 valid nand: ONFI flash detected nand: NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron MT29F2G08ABAEAWP), 256MiB, page size: 2048, OOB size: 64 Signed-off-by: Eric Bénard <eric@eukrea.com> Tested-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Eric Bénard authored on 11 Dec 2013 Sascha Hauer committed on 19 Dec 2013
2013-12-18	3b04e00 Browse files » net: dm9k: bail out when resources can't be claimed ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 18 Dec 2013
2013-12-18	1c9668a Browse files » net: dm9k: Fix resource sizes in add_dm9000_device ... The dm9000 needs a resource for an index register and one for the data register. Both should have a size of the access width, and not two times the access width. The current code is probably a leftover when the dm9000 had only one resource. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 18 Dec 2013
2013-12-17	87bae6e Browse files » pinctrl: single: select CONFIG_PINCTRL ... pinctrl_register is used. Signed-off-by: Jan Weitzel <j.weitzel@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jan Weitzel authored on 16 Dec 2013 Sascha Hauer committed on 17 Dec 2013
2013-12-12	50b0208 Browse files » atmel_nand: check gpio validity before using it ... else we get : "invalid GPIO -22" (as enable_pin is EINVAL) tested on SAMA5D35 Signed-off-by: Eric Bénard <eric@eukrea.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Eric Bénard authored on 7 Dec 2013 Sascha Hauer committed on 12 Dec 2013
	a4dfb8d Browse files » of: gpio: Fix Kconfig variables to depend on ... Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 11 Dec 2013 Sascha Hauer committed on 12 Dec 2013
	09783b9 Browse files » net: cpsw: Fix gmii_sel config ... Prober slave_num is needed by cpsw_gmii_sel_am335x to calc reg value. Signed-off-by: Jan Weitzel <j.weitzel@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jan Weitzel authored on 10 Dec 2013 Sascha Hauer committed on 12 Dec 2013
2013-12-06	6d8a85d Browse files » Merge branch 'for-next/tegra' Sascha Hauer committed on 6 Dec 2013
	ed039cd Browse files » Merge branch 'for-next/omap-drivers' Sascha Hauer committed on 6 Dec 2013
	6d7fae1 Browse files » Merge branch 'for-next/omap-devicetree-prepare' Sascha Hauer committed on 6 Dec 2013
	e9ea6ee Browse files » Merge branch 'for-next/misc' ... Conflicts: scripts/Makefile Sascha Hauer committed on 6 Dec 2013
	0cb6f2c Browse files » Merge branch 'for-next/imx' Sascha Hauer committed on 6 Dec 2013
	2789ccd Browse files » Merge branch 'for-next/gpio' Sascha Hauer committed on 6 Dec 2013
	cac8f8d Browse files » Merge branch 'for-next/clk' Sascha Hauer committed on 6 Dec 2013
2013-12-04	5f9dea9 Browse files » tegra: add SDMMC controller driver ... Confirmed working on Tegra 2, may need some small adjustments for Tegra 3. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 3 Dec 2013 Sascha Hauer committed on 4 Dec 2013
	3504f23 Browse files » clk: tegra: add SDMMC clocks ... Provide peripheral clocks for the SD controller. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 3 Dec 2013 Sascha Hauer committed on 4 Dec 2013
	1f52d71 Browse files » gpio: tegra: remove leftover debug code ... Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 3 Dec 2013 Sascha Hauer committed on 4 Dec 2013
	7b6c063 Browse files » tegra: speed up system bus ... We run the system bus from the OSC clock during init, to avoid crashing the system while reconfiguring the PLLs. Switch to a more reasonable clock when we are done with this. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 3 Dec 2013 Sascha Hauer committed on 4 Dec 2013
	87b651e Browse files » gpio: reduce noise when parsing DT ... Some GPIOs are optional, so it might not be an error if we can not find a DT property. Do the same thing as the Linux kernel and only print a debug message not an error. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 3 Dec 2013 Sascha Hauer committed on 4 Dec 2013
2013-12-03	c5ff280 Browse files » net/phy: add driver for atheros PHYs ... Based on Linux kernel 3.12 driver. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 2 Dec 2013 Sascha Hauer committed on 3 Dec 2013
2013-12-02	6e66ab7 Browse files » mtd: mtdraw: drop ioctl callback for mtdraw device ... Do not call mtd_ioctl for mtdraw devices. mtd_ioctl will derefence the priv pointer to a struct mtd_info whereas with mtdraw devices it will be a struct mtdraw pointer. We do not need ioctls for mtdraw devices, so drop it instead of fixing it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 2 Dec 2013
	3febd4d Browse files » ata: pata-imx: Add missing NULL entry in dt ids ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 2 Dec 2013
	35d64bb Browse files » mmci: add missing depends on ARM_AMBA ... The mmci implementation uses some specific arm amba functions, so add a depends on ARM_AMBA. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Aring authored on 27 Nov 2013 Sascha Hauer committed on 2 Dec 2013
2013-11-27	03d601d Browse files » mmc: omap: Add devicetree support ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 Nov 2013
	599e61e Browse files » bus: Add omap gpmc driver ... This adds a devicetree-only driver for to configure the gpmc and its child devices from dt. Currently only NAND is supported. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 Nov 2013
	f92f309 Browse files » device: Add functions to add resources ... We currently have functions to add a device based on function parameters. This adds the corresponding functions to add resources to a device without registering the device itself. This is useful to manipulate devices before registering them. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 Nov 2013