LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

History for barebox / drivers

2013-12-20	a76f3d9 Browse files » video: imx-ipu-fb: Allow to specify framebuffer memory size via platform_data ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 20 Dec 2013
	8bec1f2 Browse files » video: Add screen_size field ... barebox does not need the screen size directly, but we pass the framebuffer to Linux via simnplefb it is desirable to pass the full size of the framebuffer. Default to calculated values from the screen resolution. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 20 Dec 2013
	484cc65 Browse files » video: imx-ipu-fb: Do not modify pwm register ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 20 Dec 2013
	4e64bca Browse files » video: ipufb: Allow to disable fractional pixelclock divider ... The IPU has a fractional pixelclock divider. When used, this produces clock jitter which especially LVDS transceivers can't handle. Allow to disable it via platform_data. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 20 Dec 2013
	53bbcf8 Browse files » video: ipufb: Fix divider debug print ... The fractional part is 4 bit, not 3 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 20 Dec 2013
	ec3ba30 Browse files » video: ipufb: Fix 24bit format and implement 32bit format ... When requested 32bit formats the IPU generated a 24bit format instead. Implement real 32bit format (xxrrggbb) and let the IPU generate a 24bit format when requested. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 20 Dec 2013
	5b58f68 Browse files » video: ipufb: calculate channel param fields from fb_bitfields ... No need to hardcode the channel parameters for the rgb offsets, we can calculate them from the fb_bitfields. ipu_ch_param_write_field() is the same as is the mainline IPUv3 driver. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 20 Dec 2013
	497436e Browse files » video: ipufb: do not use bitfields ... bitfields are not portable and one should make assumptions of the layout of bitfields. Replace them with the ipu_ch_param_write_field() which is already used in the mainline IPUv3 driver. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 20 Dec 2013
2013-12-19	26f2c81 Browse files » mtd: nand_imx: remove trailing whitespaces ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 19 Dec 2013
2013-12-19	7ef217b Browse files » nand_imx: fix read ONFI param on NFC v21 ... tested on an i.MX25 where we now get : nand: ONFI param page 0 valid nand: ONFI flash detected nand: NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron MT29F2G08ABAEAWP), 256MiB, page size: 2048, OOB size: 64 Signed-off-by: Eric Bénard <eric@eukrea.com> Tested-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Eric Bénard authored on 11 Dec 2013 Sascha Hauer committed on 19 Dec 2013
2013-12-18	3b04e00 Browse files » net: dm9k: bail out when resources can't be claimed ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 18 Dec 2013
	1c9668a Browse files » net: dm9k: Fix resource sizes in add_dm9000_device ... The dm9000 needs a resource for an index register and one for the data register. Both should have a size of the access width, and not two times the access width. The current code is probably a leftover when the dm9000 had only one resource. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 18 Dec 2013
	68a6fed Browse files » video: ipufb: make disp_data_fmt configurable ... With the IPU the way the display is connected is completely independent of the framebuffer pixel format. So instead of specifying a pixel width in platform_data we have to specify how the display is connected. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 18 Dec 2013
2013-12-17	87bae6e Browse files » pinctrl: single: select CONFIG_PINCTRL ... pinctrl_register is used. Signed-off-by: Jan Weitzel <j.weitzel@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jan Weitzel authored on 16 Dec 2013 Sascha Hauer committed on 17 Dec 2013
2013-12-17	497c01f Browse files » net: add driver for OpenCores 10/100 Mbps ethernet MAC ... This patch introduces a driver for the OpenCores 10/100 Mbps ethernet MAC core, ported from Linux kernel with small changes. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Beniamino Galvani authored on 15 Dec 2013 Sascha Hauer committed on 17 Dec 2013
2013-12-12	50b0208 Browse files » atmel_nand: check gpio validity before using it ... else we get : "invalid GPIO -22" (as enable_pin is EINVAL) tested on SAMA5D35 Signed-off-by: Eric Bénard <eric@eukrea.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Eric Bénard authored on 7 Dec 2013 Sascha Hauer committed on 12 Dec 2013
	a4dfb8d Browse files » of: gpio: Fix Kconfig variables to depend on ... Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 11 Dec 2013 Sascha Hauer committed on 12 Dec 2013
	09783b9 Browse files » net: cpsw: Fix gmii_sel config ... Prober slave_num is needed by cpsw_gmii_sel_am335x to calc reg value. Signed-off-by: Jan Weitzel <j.weitzel@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jan Weitzel authored on 10 Dec 2013 Sascha Hauer committed on 12 Dec 2013
2013-12-11	6cb2b2f Browse files » net: phy: implement detect callback for miibus devices ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 11 Dec 2013
	bfc9a69 Browse files » net: phy: Track mii buses on a list ... To be able to iterate over registered mii buses Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 11 Dec 2013
	5200678 Browse files » net: phy: move phy_init_hw to phy_device_connect ... This is needed when a phy gets registered outsize of phy_device_connect but has to be attached to an ethernet device later. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 11 Dec 2013
	3379025 Browse files » net: phy: track registered state of a phy device ... With this phy_device_connect only registers a phy device if it wasn't registered already. This allows us to register phy devices outside of ethernet drivers. phy_device_connect will now pick up an already registered phy given that it's not attached to another ethernet device. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 11 Dec 2013
	d023d69 Browse files » net: phy: check if a phy already has an ethernet device ... If during a phy_device_connect a phy already has an ehternet device this can only mean it's already attached to another device. return -EBUSY in this case. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 11 Dec 2013
	664694d Browse files » net: phy: move duplicated code out of if/else ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 11 Dec 2013
	58f9167 Browse files » net: phy: bail out early in phy_device_connect ... If an ethernet device already has a phy in phy_device_connect all we have to do is to start autonegotiation. Do this early and bail out so that for the rest of the code it's clear that we have to search for a phy device. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 11 Dec 2013
	5f0a717 Browse files » net: phy: cleanup attached device handling ... phy_register_device() currently requires an attached ethernet device. This is not needed, a phy device can equally well be registered as a standalone device without an ethernet device. Remove the need for an attached ethernet device in phy_register_device. Also, make the edev <-> phy connection on a registered device which simplifies the code. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 11 Dec 2013
2013-12-06	6d8a85d Browse files » Merge branch 'for-next/tegra' Sascha Hauer committed on 6 Dec 2013
	ed039cd Browse files » Merge branch 'for-next/omap-drivers' Sascha Hauer committed on 6 Dec 2013
	6d7fae1 Browse files » Merge branch 'for-next/omap-devicetree-prepare' Sascha Hauer committed on 6 Dec 2013
	e9ea6ee Browse files » Merge branch 'for-next/misc' ... Conflicts: scripts/Makefile Sascha Hauer committed on 6 Dec 2013