LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

History for barebox / drivers

2014-03-03	ad22ad3 Browse files » mtd: nand: atmel pmecc: disable subpage writes ... I am using an sam5d35 and its pmecc nand ecc controller. In barebox, using similar atmel_nand.c the system crashes. The problem was a call to chip->ecc.hwctl from nand_write_subpage_hwecc (nand_base.c) when we write a sub page. chip->ecc.hwctl function is not set when we are using PMECC controller. As a workaround, i set NAND_NO_SUBPAGE_WRITE for PMECC controller in order to disable sub page access in nand_write_page. I think we can have the same problem in Linux. I do not performed subpage nand writes from Linux but i made the following patch according to my Barebox defect. Signed-off-by: Herve Codina <Herve.CODINA@celad.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Herve Codina authored on 28 Feb 2014 Sascha Hauer committed on 3 Mar 2014
2014-02-28	fb7836e Browse files » cfi_flash: fix NULL pointer dereference ... We need to setup the info->dev pointer before flash_get_size() since it might use it for dev_dbg(). This fix a crash on boot when debug output is enabled. Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Philippe Rétornaz authored on 25 Feb 2014 Sascha Hauer committed on 28 Feb 2014
2014-02-14	9bdef9e Browse files » mci: Fix version handling ... Currently the version defines reflect the digits in the version number. MMC_VERSION_4_41 is defined as 0x441 and MMC_VERSION_4_5 is defined as 0x405. This results in MMC_VERSION_4_5 < MMC_VERSION_4_41 becoming true which was surely not intended. Fix this by redefining the versions as 0x<major><minor><micro>. This makes the string generation more complicated but makes versions comparable again. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 14 Feb 2014
2014-02-04	4f2f915 Browse files » cfi_flash.c: correct calculation of region erasesize and offset for multiple (size_ratio > 1) chips in parallel ... Signed-off-by: Cristiano De Alti <cristiano_dealti@hotmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cristiano De Alti authored on 3 Feb 2014 Sascha Hauer committed on 4 Feb 2014
2014-02-03	adbf51a Browse files » Merge branch 'for-next/pxa' Sascha Hauer committed on 3 Feb 2014
	d08d73b Browse files » Merge branch 'for-next/net' Sascha Hauer committed on 3 Feb 2014
	601bf0f Browse files » Merge branch 'for-next/misc' Sascha Hauer committed on 3 Feb 2014
	d3c96d6 Browse files » Merge branch 'for-next/mci' ... Conflicts: arch/arm/boards/tqma53/board.c Sascha Hauer committed on 3 Feb 2014
	c224cd3 Browse files » Merge branch 'for-next/imx' ... Conflicts: arch/arm/boards/dmo-mx6-realq7/lowlevel.c Sascha Hauer committed on 3 Feb 2014
	3cbd92b Browse files » Merge branch 'for-next/gpio' Sascha Hauer committed on 3 Feb 2014
	f4cece7 Browse files » Merge branch 'for-next/clps711x' Sascha Hauer committed on 3 Feb 2014
2014-01-31	8e174d4 Browse files » mci: imx-esdhc: Add i.MX25 compatible entry ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 31 Jan 2014
2014-01-29	303c3d1 Browse files » gadget: at91: Fix uninitialized variable ... Variable udc is used unitialized for DBG(xxx). Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Shiyan authored on 29 Jan 2014 Sascha Hauer committed on 29 Jan 2014
	0099a88 Browse files » reset_source: rename set_reset_source to reset_source_set ... To get all reset source related functions into the same function namespace. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 29 Jan 2014
	078a29d Browse files » mci: imx: Add devicetree probe support ... Only simple probing, no properties supported yet. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 29 Jan 2014
	d25cba0 Browse files » pinctrl: Add pinctrl driver for i.MX1/21/27 ... This turns the legacy iomux-v1 support into a full pinctrl driver. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 29 Jan 2014
	ae39ba2 Browse files » misc: Add devicetree SRAM driver ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 29 Jan 2014
	27da166 Browse files » misc Kconfig: always ask for misc devices ... The "Misc devices" menu does not enable anything by itself, so make it a regular menu rather than a menuconfig. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 29 Jan 2014
	7a150c5 Browse files » net usb asix: add AX88772B USB ID ... Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Philipp Zabel authored on 22 Jan 2014 Sascha Hauer committed on 29 Jan 2014
	4eabf12 Browse files » net usb asix: read MAC from EEPROM on AX88772B ... Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Philipp Zabel authored on 28 Jan 2014 Sascha Hauer committed on 29 Jan 2014
2014-01-27	25cee7e Browse files » environment: Use accessor functions for default environment path ... default_environment_path only exists when CONFIG_ENV_HANDLING is enabled. Boards would have to #ifdef this if they wanted to use default_environment_path. Use accessor functions instead which can be ifdeffed on a single place. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 Jan 2014
2014-01-24	32d6d2a Browse files » serial: clps711x: Update driver ... This patch updates the CLPS711X UART driver. The update adds support for use with devicetree and makes driver comatible with current driver from kernel. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Shiyan authored on 23 Jan 2014 Sascha Hauer committed on 24 Jan 2014
	6c3e620 Browse files » gpio: clps711x: Update driver ... This patch updates the CLPS711X GPIO driver. The update adds support for use with devicetree and optimizes "probe" a bit. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Shiyan authored on 23 Jan 2014 Sascha Hauer committed on 24 Jan 2014
	6244541 Browse files » ARM: clps711x: Remove the special name for the syscon driver ... No reason to make SYSCON driver name unique to that processor. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Shiyan authored on 23 Jan 2014 Sascha Hauer committed on 24 Jan 2014
	c2c5f48 Browse files » mfd: syscon: Introduce syscon_base_lookup_by_phandle() function ... Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Shiyan authored on 23 Jan 2014 Sascha Hauer committed on 24 Jan 2014
2014-01-23	f5fa816 Browse files » net usb asix: Use only 11 bits of header for data size ... The AX88772B uses only 11 bits of the header for the actual size. The other bits are used for something else. This causes dmesg full of messages: asix_rx_fixup() Bad Header Length This patch trims the check to only 11 bits. I believe on older chips, the remaining 5 top bits are unused. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Marek Vasut authored on 22 Jan 2014 Sascha Hauer committed on 23 Jan 2014
2014-01-23	c827eb8 Browse files » net usb asix: Simplify condition in rx_fixup() ... Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Marek Vasut authored on 22 Jan 2014 Sascha Hauer committed on 23 Jan 2014
2014-01-22	dac65f9 Browse files » console: Set Linux console parameter automatically ... Linux specifies the linux,stdout-path property in the /chosen node in the devicetree. Unfortunately this is ignored in most cases. For cases in which barebox uses this property for its own use we translate this into a Linux boot arg with: - the console name provided by the serial driver - the the instance from the 'serial' alias - the baudrate from the actual baudrate. So with this it's for devicetee enabled boards no longer necessary to manually assign a console= parameter. Should a user not want to use the automatically assigned parameter it should do: global.linux.bootargs.console= in the environment. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 22 Jan 2014
2014-01-20	cec6fd5 Browse files » net/phy: add driver for National Semiconductor DP83865 PHY ... Based on Linux kernel 3.12 driver. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 13 Jan 2014 Sascha Hauer committed on 20 Jan 2014
2014-01-20	d9a08d8 Browse files » net: phy: Fix crash when no phy is found ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 20 Jan 2014