ARM: i.MX6 Phytec phyFLEX: Add watchdog reset workaround ...

phyFLEX boards beginning with 1362.2 have a workaround for this
i.MX6 bug:

ERR006282 ROM code uses nonreset PFDs to generate clocks, which may
lead to random boot failures

On these boards the SD4_DAT3 pin os connected to the CMIC. The CMIC
will reset the board after 10s when the pin isn't toggled.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

imx6:phyFLEX: Fix ENTRY_FUNCTION ...

For some phyFLEX-i.MX6 modules the call __barebox_arm_head() was not removed.
With this function the barebox does not start.

Signed-off-by: Christian Hemp <christian.hemp@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX efika-sb: switch otg port to utmi mode ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: imx_v7_defconfig: update ...

Enable blspec and menutree support which was lost.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: AM335x: Beaglebone: Fix memory setup for Beaglebone black ...

Commit 0d6392d introduced a stripped
down device tree used for both white and black Beaglebone variants
that included the 256 MiB memory node from am335x-bone-common.dtsi.
This leads to the following error in the MLO:

    mmu: Critical Error: Can't request SDRAM region for ttb at 9fff4000

This patch removes the (for the Beaglebone black) invalid memory size
from the common device tree and instead registers the memory bank
manually in the board file.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: Phytec-phyCARD-imx27: Add missing compatible check ...

Only run pca100 code when it's actually a pca100. While at it
consolidate two initcalls.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mips: Fix dtb build rules ...

Add intermediate .S files to .SECONDARY. Otherwise make deletes them
and regenerates them each build.
Also remove KBUILD_DTBS since the make system descends in dts/ anyway.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

treewide: remove address of the Free Software Foundation ...

The FSF address has changed; The FSF site says that
address is

  Free Software Foundation
  51 Franklin Street, Fifth Floor
  Boston, MA 02110-1301
  USA

(see http://www.fsf.org/about/contact/)

Instead of updating it each time the address changes,
just drop it completely treewide.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: dts: add .gitignore for generated files ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'pu/warnings'

ARM: dts: Remove orphaned i.MX27 DT template ...

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: AM335x: Beaglebone: Use stripped down devicetree for MLO ...

The beaglebone white and black have different devicetrees. Both
get linked into the MLO which makes it too big. Use a devicetree
generated from am335x-bone-common.dtsi which both board variants
can share. This reduces the binary size by about 30k.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mips: Add builtin dtb to dtb-y ...

Otherwise a rebuild of the dtb file is triggered each build.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

PPC: FSL DDR: Fix compiler warning ...

Fixes:

arch/ppc/boards/freescale-p1022ds/ddr.c: In function 'fsl_ddr_board_info':
arch/ppc/boards/freescale-p1022ds/ddr.c:39:21: warning: assignment discards 'const' qualifier from pointer target type [enabled by default]

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mips: ar9331: Add missing #address-cells/#size-cells properties ...

SPI nodes need valid #address-cells/#size-cells properties.
Fixes:

Warning (reg_format): "reg" property in /soc/spi@bf000000/m25p80@0 has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
Warning (avoid_default_addr_size): Relying on default #address-cells value for /soc/spi@bf000000/m25p80@0
Warning (avoid_default_addr_size): Relying on default #size-cells value for /soc/spi@bf000000/m25p80@0

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mips: dlink-dir-320: refresh defconfig ...

Fixes:

arch/mips/configs/dlink-dir-320_defconfig:52:warning: override: reassigning to symbol CMD_DHCP
arch/mips/configs/dlink-dir-320_defconfig:54:warning: override: reassigning to symbol CMD_PING
arch/mips/configs/dlink-dir-320_defconfig:55:warning: override: reassigning to symbol CMD_TFTP
arch/mips/configs/dlink-dir-320_defconfig:64:warning: override: reassigning to symbol FS_TFTP

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: friendlyarm_mini2440: refresh defconfig ...

Fixes:

arch/arm/configs/friendlyarm_mini2440_defconfig:38:warning: override: reassigning to symbol CMD_TFTP
arch/arm/configs/friendlyarm_mini2440_defconfig:46:warning: override: reassigning to symbol FS_TFTP

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: MXS: Remove unused variables ...

Fixes:

arch/arm/boards/crystalfontz-cfa10036/cfa10036.c: In function 'cfa10036_devices_init':
arch/arm/boards/crystalfontz-cfa10036/cfa10036.c:119:9: warning: unused variable 'ret' [-Wunused-variable]
arch/arm/boards/chumby_falconwing/falconwing.c: In function 'falconwing_devices_init':
arch/arm/boards/chumby_falconwing/falconwing.c:287:9: warning: unused variable 'rc' [-Wunused-variable]
arch/arm/boards/imx233-olinuxino/imx23-olinuxino.c: In function 'imx23_olinuxino_devices_init':
arch/arm/boards/imx233-olinuxino/imx23-olinuxino.c:118:9: warning: unused variable 'rc' [-Wunused-variable]

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

tegra: refresh defconfig ...

Mainly for Jetson TK1 support, but -next moved
some stuff around. Also enable some filesystems.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

tegra: add NVIDIA Jetson-TK1 board support ...

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

tegra: pmc: add Tegra124 compatible ...

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

pinctrl: tegra: add Tegra124 support ...

We can reuse the Tegra30 pinctrl driver, as the bit
layout is the same. Just add the pin and drivegroups
and some compile-time magic to avoid bloat.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

tegra: add Tegra124 Kconfig symbol ...

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

tegra: add architectural timer init ...

If the bootloader doesn't init the architectural timer
on Cortex A15 Linux falls over when trying to boot.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

tegra: setup L2 cache on Tegra124 ...

Set SRAM latency to 3 clock cycles.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

tegra: hardcode entry address for main cluster ...

I don't know why get_runtime_offset fails on T124 yet,
but this is a safe workaround, with the nice side-effect
of fixing second stage barebox loading.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

tegra: apply cluster switch logic to all SoCs >=T30 ...

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

tegra: add Tegra124 PLL_X rate setup ...

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

tegra: change cpu internal reset layout for Tegra124 ...

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

tegra: fix MESLECT clock enable ...

Don't disable clk to unrelated devices in the process.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>