treewide: remove address of the Free Software Foundation ...

The FSF address has changed; The FSF site says that
address is

  Free Software Foundation
  51 Franklin Street, Fifth Floor
  Boston, MA 02110-1301
  USA

(see http://www.fsf.org/about/contact/)

Instead of updating it each time the address changes,
just drop it completely treewide.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/openrisc'

openrisc: update cpuinfo ...

Update cpuinfo to display the current CPU implementation
using the VR2 register defined in the architecture specification
v1.0

Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

openrisc: fix relocation code ...

The relocation code can now relocate from anywhere to
the RAM.

The old code assumed that the binary was copied to the RAM
by some PBL and then it just relocated the .text section
from the loaded address to the linked address.

Now, it first checks if vectors are somewhere else than the
linked address. If yes, there are copied to address 0 (or
to the exception vector base address if register EVBAR is
present).

Then, the .text section is relocated from its current location
to the RAM.

Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

openrisc: update SPR registers definition ...

The OpenRISC architecture specification v1.0 defines
new SPR registers. This patch adds registers definition
for group 0 and update bit definitions for the CPU
configuration register.

Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: NET_DHCP -> CMD_DHCP ...

* this compile option actually turns on a command, so name it
  accordingly
* also move the Kconfig definition into commands/Kconfig, thus
  placing getopt into the "Network commands" section
* while at it, improve Kconfig documention

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: NET_PING -> CMD_PING ...

* this compile option actually turns on a command, so name it
  accordingly
* also move the Kconfig definition into commands/Kconfig, thus
  placing getopt into the "Network commands" section
* while at it, improve Kconfig documention

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: harmonize in-barebox documentation ...

This patch does probably too much, but it's hard (and very
cumbersome/time consuming) to break it out. What is does is this:

* each command has one short description, e.g. "list MUX configuration"
* made sure the short descriptions start lowercase
* each command has one usage. That string contains just the
  options, e.g. "[-npn]". It's not part of the long help text.
* that is, it doesn't say "[OPTIONS]" anymore, every usable option
  is listed by character in this (short) option string (the long
  description is in the long help text, as before)
* help texts have been reworked, to make them
  - sometimes smaller
  - sometimes describe the options better
  - more often present themselves in a nicer format
* all long help texts are now created with BUSYBOX_CMD_HELP_
  macros, no more 'static const __maybe_unused char cmd_foobar_help[]'
* made sure the long help texts starts uppercase
* because cmdtp->name and cmdtp->opts together provide the new usage,
  all "Usage: foobar" texts have been removed from the long help texts
* BUSYBOX_CMD_HELP_TEXT() provides the trailing newline by itself, this
  is nicer in the source code
* BUSYBOX_CMD_HELP_OPT() provides the trailing newline by itself
* made sure no line gets longer than 77 characters
* delibertely renamed cmdtp->usage, so that we can get compile-time
  errors (e.g. in out-of-tree modules that use register_command()
* the 'help' command can now always emit the usage, even without
  compiled long help texts
* 'help -v' gives a list of commands with their short description, this
  is similar like the old "help" command before my patchset
* 'help -a' gives out help of all commands

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: group 'help' output ...

The old output of "help" was just producing a long list, that usually
scrolled of the screen (even on a X11 terminal). This list is more
compact, and also sorted by groups.

The old output format (plus grouping) is now available with 'help -v'.

Example:

   Information commands:
     ?, devinfo, help, iomem, meminfo, version
   Boot commands:
     boot, bootm, go, loadb, loads, loadx, loady, saves, uimage
   ...

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

x86: ns16550: Rework driver to allow for x86 I/O space ...

The current implementation fakes a memory-mapped I/O device
at 0x3f8 and 0x2f8, then uses platform read/write functions
to do the actual reading and writing. These platform functions
only exist for the x86 platform; better to move the I/O
routines into the driver and have the driver request I/O ports
using request_ioport_region.

Signed-off-by: Michel Stam <michel@reverze.net>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

openrisc: Use generic io accessors ...

openrisc does nothing special in the io accessors, so use the generic
ones as the kernel.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

defaultenv: Allow multiple defaultenvironment overlays ...

We can compile barebox for multiple boards at once, but currently
they all share a single default environment. This patch adds a
defaultenv_append() which boards can call to customize the default
environment during runtime. Each board now generate default environment
snippets using bbenv-y and add them during runtime with defaultenv_append()

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

openrisc: enable OpenCores ethernet driver ...

The OpenCores 10/100 Mbps ethernet MAC is often available on
OpenRISC-based SoCs and is supported by the OpenRISC architectural
simulator (or1ksim) as well.

The patch enables the driver on the 'generic' openrisc board.

Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Set model and hostname at boardlevel ...

With multiboard support the compiletime generated BOARDINFO string
gets more and more meaningless. This removes it from Kconfig and
replaces it with a variable that can be set at boardlevel.

Also many boards have a standard setting for the hostname in the
environment. This patch also moves the standard to C code by calling
barebox_set_hostname().

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

openrisc: initialize malloc pool before start_barebox() ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

remap_range: make function 'remap_range' global ...

Change function remap_range in arm architecture to make it
global accessable. For example command 'memtest' can change
pte flags to enable or disable cache.

Add dummy function for others architectures that doesn't
have mmu or pte support.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Cleanup Kconfig files ...

This patch provides a global cleanup barebox Kconfig files. This includes
replacing spaces to tabs, formatting in accordance format, removing
extraneous lines and spaces. No functional changes.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

openrisc: generic board cleanup ...

Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

openrisc: switch to defaultenv-2 and change boardinfo ...

Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/remove-fsf-address' ...

Conflicts:
	drivers/net/miidev.c
	include/miidev.h

Treewide: remove address of the Free Software Foundation ...

The FSF address has changed in the past. Instead of updating it
each time the address changes, just drop it completely treewide.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Add __ashrdi3 and remove link to libgcc ...

In a previous patch, Sascha needed to add __ashrdi3 and then linked
to libgcc. This patch add the ashrdi3 function in the arch/openrisc/lib
directory and remove the libgcc dependency.

Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/fs'

openrisc: Add unaligned support ...

Copied directly from Linux header file

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

devices: fix missing conversion to DEVICE_ID_DYNAMIC ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/dma-cache-align'

blackfin, mips, openrisc, ppc, sandbox, x86: add generic dma_alloc, dma_free inlines ...

Some drivers call dma_inv_range() on buffers, on arm these buffers must
be cache line aligned. This patch introduces a generic dma_alloc,
dma_free. Archs can implement in their own functions in "asm/dma.h" and add a:

	#define dma_alloc dma_alloc
	#define dma_free dma_free

On all other archs the generic versions, which translate into xmalloc
and free are used.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

openrisc: link to libgcc ...

To get symbols like __ashrdi3.

Franck started generating these symbols from gcc assembly, which seems
to be the cleaner approach. The simpler approach for now to get additional
symbols is to link in libgcc, which is the same as the kernel does.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Franck Jullien <franck.jullien@gmail.com>

openrisc: fix build due to redefined phys_size_t ...

We already have a phys_size_t since:

commit 2f05b69
Author: Renaud Barbier <renaud.barbier@ge.com>
Date:   Fri May 11 11:58:13 2012 +0100

    linux/types.h: define phys_size_t

    Add this definition in preparation for the introduction of the
    mpc85xx support.

    Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
    Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Fix build due to redefinition of this type.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ENV: remove kernelimage_type from env/config ...

drop kernelimage_type bootm now boots all of them.

Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>