commands: move CMD_AT91MIX to commands/Kconfig ...

* this places the command into the "Information commands"
  section of Kconfig
* while at it, improve Kconfig documention

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: move CMD_AT91MUX to commands/Kconfig ...

* this places the command into the "Information commands"
  section of Kconfig
* while at it, improve Kconfig documention

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: move CMD_AT91_BOOT_TEST to commands/Kconfig ...

* this places the command into the "Boot commands"
  section of Kconfig
* while at it, improve Kconfig documention

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: move CMD_BOOT_ORDER to commands/Kconfig ...

* this places the command into the "Boot commands"
  section of Kconfig
* while at it, improve Kconfig documention

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: move CMD_ARM_MMUINFO to commands/Kconfig ...

* this places the command into the "Information commands"
  section of Kconfig
* while at it, imprive Kconfig documention

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: move CMD_ARM_CPUINFO to commands/Kconfig ...

* this places the command into the "Information commands"
  section of Kconfig
* while at it, imprive Kconfig documention

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: CMD_DIGEST -> COMPILE_DIGEST ...

This config just turned on the compilation of digest.c (used by 'SHA1',
'sha256sum' etc), so name it accordingly.

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: CMD_MEMORY -> COMPILE_MEMORY ...

* CMD_MEMORY was defined both in common/Kconfig and commands/Kconfig
* that symbol turned not a command on, but just the compilation of
  commands/mem.c, so rename it accordingly

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: harmonize in-barebox docs with Kconfig docs ...

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: harmonize in-barebox documentation ...

This patch does probably too much, but it's hard (and very
cumbersome/time consuming) to break it out. What is does is this:

* each command has one short description, e.g. "list MUX configuration"
* made sure the short descriptions start lowercase
* each command has one usage. That string contains just the
  options, e.g. "[-npn]". It's not part of the long help text.
* that is, it doesn't say "[OPTIONS]" anymore, every usable option
  is listed by character in this (short) option string (the long
  description is in the long help text, as before)
* help texts have been reworked, to make them
  - sometimes smaller
  - sometimes describe the options better
  - more often present themselves in a nicer format
* all long help texts are now created with BUSYBOX_CMD_HELP_
  macros, no more 'static const __maybe_unused char cmd_foobar_help[]'
* made sure the long help texts starts uppercase
* because cmdtp->name and cmdtp->opts together provide the new usage,
  all "Usage: foobar" texts have been removed from the long help texts
* BUSYBOX_CMD_HELP_TEXT() provides the trailing newline by itself, this
  is nicer in the source code
* BUSYBOX_CMD_HELP_OPT() provides the trailing newline by itself
* made sure no line gets longer than 77 characters
* delibertely renamed cmdtp->usage, so that we can get compile-time
  errors (e.g. in out-of-tree modules that use register_command()
* the 'help' command can now always emit the usage, even without
  compiled long help texts
* 'help -v' gives a list of commands with their short description, this
  is similar like the old "help" command before my patchset
* 'help -a' gives out help of all commands

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: group 'help' output ...

The old output of "help" was just producing a long list, that usually
scrolled of the screen (even on a X11 terminal). This list is more
compact, and also sorted by groups.

The old output format (plus grouping) is now available with 'help -v'.

Example:

   Information commands:
     ?, devinfo, help, iomem, meminfo, version
   Boot commands:
     boot, bootm, go, loadb, loads, loadx, loady, saves, uimage
   ...

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

drop CONFIG_PARTITION_NEED_MTD ...

With CONFIG_PARTITION_NEED_MTD enabled we use mtd rather than devfs
directly to create partitions on mtd devices. Since:

| commit b32cd8d
| Author: Sascha Hauer <s.hauer@pengutronix.de>
| Date:   Wed Apr 9 15:49:32 2014 +0200
|
|     mtd: nand: bb: use mtd api directly
|
|     The devfs layer just adds an addition indirection between mtd
|     and the bb devices with no purpose. Drop it.
|
|     Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

The bad block aware device creation doesn't work if this option
is disabled. With this we remove CONFIG_PARTITION_NEED_MTD and always
use mtd partitions on mtd devices.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

boot: iterate over directories in alphabetical order ...

When iterating over directories in order to find boot scripts do
this alphabetically to get a predictable order. This can be done
with glob() rather than readdir().

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

boot: fix multiple boot sources ...

When there are multiple bootsources barebox should try booting them
until one succeeds. This is broken because we bail out of the iteration
loop with a goto. Remove the goto to fix this.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Fix the options and protocols used by the loadx command. ...

From 3cd9702 Mon Sep 17 00:00:00 2001
From: Owen Kirby <osk@exegin.com>
Date: Thu, 8 May 2014 13:27:11 -0700
Subject: [PATCH] Fix the options and protocols used by the loadx command.

It seems like the loadx command was improperly copy/pasted from the loady
implementation, and was trying to load files using the ymodem protocol. This
patch should fix the command so that it uses xmodem, implements the -t option
and outputs the correct baudrate being used.

Signed-off-by: Owen Kirby <osk@exegin.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/regulator' ...

Conflicts:
	commands/Makefile

Merge branch 'for-next/misc'

Merge branch 'for-next/memtest'

Merge branch 'for-next/ioresource'

commands/umount: Return real error code if "umount" fail ...

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands/mount: Return real error code if "mount" fail ...

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Add initial regulator support ...

Provide minimal regulator support. Only supported operations are enabling
and disabling regulators. Association of devices with their regulators is
limited to devicetree only. If regulator support is disabled the API expands
to static inline stubs so consumers can still use the API.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

env: erase/protect in envfs_save ...

So that the envfs_save is more useful outside of the saveenv command

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands/usbserial: Remove unused variable ...

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

2048: port to barebox ...

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

memtest: cleanup requests of regions ...

This patch removes the first and last entry check inside the loop.
There should be no functional changes there.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

memtest: cleanup error handling ...

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: loady: fix Y-Modem/G option name in help message ...

Actually loady command uses '-g' option for Y-Modem/G mode
selection; see loady() function:

    while ((opt = getopt(argc, argv, "b:t:g")) > 0) {
        switch (opt) {
    ...
        case 'g':
            is_ymodemg = 1;
            break;

By mistake help message show '-y' option for Y-Modem/G mode
selection.

This patch fixes the problem.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: uimage: remove redundant error message ...

uimage_verify already prints an error message if the CRC
is wrong. Romove the never reached redundant message in
the caller.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

treewide: fix signedness mixups in printf format specifiers ...

This most likely doesn't fix any real bugs, but it's the
right thing to do and reduces the noise level with static
checkers.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>