Merge branch 'for-next/misc' ...

Conflicts:
	lib/Makefile

mtd: omap gpmc: reserve 14 byte/subpage for ECC in BCH8 romcode ...

As done in the Kernel. The Kernel has a comment this is done to
be compatible with the ROM code.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: omap gpmc: fix ecc bytes/size ...

The ecc bytes / size are per subpage, not per page.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: atmel_nand: enable PMECC for 8k page nand ...

Enable the PMECC to support 8k page.

Signed-off-by: Raphaël Poggi <poggi.raph@gmail.com>
Acked-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: atmel_nand: fix bit error correction ...

When pmecc uses a 1024 sector size to correct bit error, the gf dimension
must be 14.

So this commit chooses the right degree for different sector size (512 or 1024).

Signed-off-by: Raphaël Poggi <poggi.raph@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: atmel_nand: increase chip_delay ...

Some nand like Micron MT29F32G08ABAAAWP need more than 20us.

Signed-off-by: Raphaël Poggi <poggi.raph@gmail.com>
Acked-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: atmel_nand: add SOFT_BCH support ...

To use soft ecc with nand with 8k page, we need the BCH support.
This commit adds the possibilty for atmel_nand to enable SOFT_BCH.

Signed-off-by: Raphaël Poggi <poggi.raph@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

drivers/mtd: fix NULL pointer dereference in partition lock/unlock ...

Some mtd device does not support lock and unlock functions. Adding this check
avoids crashing when mtd_part_lock/unlock are called for such devices.

Signed-off-by: Zahari Doychev <zahari.doychev@linux.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: delete partition erase size initialisation ...

Delete the partition erase size initialisation to let the code
that follows determine the biggest partition erase size.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: use long long dev param for size ...

Signed-off-by: Herve Codina <Herve.CODINA@celad.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

treewide: remove address of the Free Software Foundation ...

The FSF address has changed; The FSF site says that
address is

  Free Software Foundation
  51 Franklin Street, Fifth Floor
  Boston, MA 02110-1301
  USA

(see http://www.fsf.org/about/contact/)

Instead of updating it each time the address changes,
just drop it completely treewide.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: partition: implement lock/unlock ...

CFI Nor flashes need lock/unlock which is not implemented for partitions.
Fix this.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: partition: Fix multi eraseregion chips ...

The current code counts the eraseregions a new partition spans and
sets the partitions number of eraseregions accordingly, but the code
forgets to allocate and fill in the eraseregions for the partition
mtd device. This makes the erase operation crash with a NULL pointer
exception.
This patch fixes this with the same approach the kernel uses: Set
the number of eraseregions to 1 unconditionally and the eraseregion
size to the maximum of the eraseregions found in the partition.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: fix mtd erasesize ...

Set mtd erasize using max erasesize from erase regions

Signed-off-by: Herve Codina <Herve.CODINA@celad.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: Fix writesize parameter value ...

Signed-off-by: Herve Codina <Herve.CODINA@celad.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/misc' ...

Conflicts:
	commands/devinfo.c

Merge branch 'for-next/doc'

mtd: nand: mxs: Fix 2k nand with oob size of 224 bytes ...

The mxs nand driver has a calculation for the ecc strength.
This calculation was not used for some common nands and it
was assumed that 2k page nands always have a ecc strength
of 8. This is not true since there are devices with 224 bytes
of oob instread of 64 bytes. These allow for a greater ecc
strength. Since the kernel relies on the calculation and
we have to be consistent with the kernel use the calculcation
in barebox aswell and just remove our assumptions.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: m25p80: update Micron IDs ...

Update Micron IDs from Linux-3.15-rc5. Skip n25q512a for now
since it needs flag status polling.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: partitions: only add write functions when mtd write support is enabled ...

Makes the binary a few bytes smaller.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: harmonize in-barebox documentation ...

This patch does probably too much, but it's hard (and very
cumbersome/time consuming) to break it out. What is does is this:

* each command has one short description, e.g. "list MUX configuration"
* made sure the short descriptions start lowercase
* each command has one usage. That string contains just the
  options, e.g. "[-npn]". It's not part of the long help text.
* that is, it doesn't say "[OPTIONS]" anymore, every usable option
  is listed by character in this (short) option string (the long
  description is in the long help text, as before)
* help texts have been reworked, to make them
  - sometimes smaller
  - sometimes describe the options better
  - more often present themselves in a nicer format
* all long help texts are now created with BUSYBOX_CMD_HELP_
  macros, no more 'static const __maybe_unused char cmd_foobar_help[]'
* made sure the long help texts starts uppercase
* because cmdtp->name and cmdtp->opts together provide the new usage,
  all "Usage: foobar" texts have been removed from the long help texts
* BUSYBOX_CMD_HELP_TEXT() provides the trailing newline by itself, this
  is nicer in the source code
* BUSYBOX_CMD_HELP_OPT() provides the trailing newline by itself
* made sure no line gets longer than 77 characters
* delibertely renamed cmdtp->usage, so that we can get compile-time
  errors (e.g. in out-of-tree modules that use register_command()
* the 'help' command can now always emit the usage, even without
  compiled long help texts
* 'help -v' gives a list of commands with their short description, this
  is similar like the old "help" command before my patchset
* 'help -a' gives out help of all commands

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: group 'help' output ...

The old output of "help" was just producing a long list, that usually
scrolled of the screen (even on a X11 terminal). This list is more
compact, and also sorted by groups.

The old output format (plus grouping) is now available with 'help -v'.

Example:

   Information commands:
     ?, devinfo, help, iomem, meminfo, version
   Boot commands:
     boot, bootm, go, loadb, loads, loadx, loady, saves, uimage
   ...

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

drop CONFIG_PARTITION_NEED_MTD ...

With CONFIG_PARTITION_NEED_MTD enabled we use mtd rather than devfs
directly to create partitions on mtd devices. Since:

| commit b32cd8d
| Author: Sascha Hauer <s.hauer@pengutronix.de>
| Date:   Wed Apr 9 15:49:32 2014 +0200
|
|     mtd: nand: bb: use mtd api directly
|
|     The devfs layer just adds an addition indirection between mtd
|     and the bb devices with no purpose. Drop it.
|
|     Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

The bad block aware device creation doesn't work if this option
is disabled. With this we remove CONFIG_PARTITION_NEED_MTD and always
use mtd partitions on mtd devices.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/misc'

Merge branch 'for-next/env'

mtd: nand-mxs: Return bitflips ...

The read_page hook shall return the number of bitflips. Implement
that.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: nand-bb: use list_for_each_entry_safe ...

We need list_for_each_entry_safe in dev_remove_bb_dev since the
list entries are removed during iteration over the list.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reported-by: Alexander Aring <alex.aring@gmail.com>

mtd: nand: create bb devices automatically ...

When a mtd device can have bad blocks we want to create a
bb device, so do this automatically. This allows us to
drop bb device creation from the environment.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: refactor bb device creation ...

This refactors the code so that we get a mtd_add_bb which can
be used to create a bb dev on a mtd_info.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: nand: bb: use mtd api directly ...

The devfs layer just adds an addition indirection between mtd
and the bb devices with no purpose. Drop it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>