ARM: i.MX: edmqmx6: free phy-reset gpio pin ...

Since 93a6c6a808("dts: update to v3.17-rc2") we have a correct gpio
configuration. This results in a double gpio request what receipted in a
error message like this one:

	gpiolib: _gpio_request: gpio-25 (phy-reset) status -16

Now with this patch the problem is gone.

Signed-off-by: Silvio Fricke <silvio.fricke@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: AT91: Make gpio mux functions inline ...

Otherwise we get a unused function warning each time mach/gpio.h
is included.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: AT91: Add missing include ...

the gpio mux functions were moved to mach/gpio.h. Add the missing
include.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

dts:imx6:pfla02: Fix SPI NOR for phyFLEX-i.MX6 ...

Add chip-select property to pfla02 devicetree.

Signed-off-by: Christian Hemp <c.hemp@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/marvell'

Merge branch 'for-next/dts'

pinctrl: at91: add pinctrl driver ...

This driver is based on mach-at91/gpio.c and linux pinctrl driver.
The driver contains the gpio and pinctrl parts (like in linux) because the two parts
share some structures and logics.

Signed-off-by: Raphaël Poggi <poggi.raph@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arm: mach-at91: move gpio.h to include folder ...

This commit add functions from mach-at91/gpio.h in include/mach/gpio.h.
This allow to use these functions outside the mach-at91 folder.

Signed-off-by: Raphaël Poggi <poggi.raph@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: atmel_nand: retrieve ecc_mode from pdata ...

By retrieving the ecc_mode from pdata we can use the same code for device tree and
non device tree probing. Which was not possible before, because ecc_mode was arbitrarily set to
NAND_ECC_SOFT.

Signed-off-by: Raphaël Poggi <poggi.raph@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: dts: move imx6q-embedsky-e9.dtsi to arch/arm/dts/boot ...

dts/ is for upstream dts files only. Move barebox specific file
to arch/arm/dts/ so that it doesn't get removed by the next
dts update.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: dts: Use local version of rk3188-clocks.dtsi ...

As of 3.17-rc1 the upstream dts sources for the rockchip rk3188 use
incompatible clock bindings. We currently do not have the resources
to update the clock driver to this new binding, so we use local copies
of the Linux 3.16 dtsi files. Due to the incompatible change the
internal device tree won't work with kernels newer than 3.17-rc1.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: nand: add has_pmecc member ...

By adding this structure member, we can retrieve the pmecc config, through the device tree.

Signed-off-by: Raphaël Poggi <poggi.raph@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arm: nitrogen6x: new memory setup from BD u-boot ...

This fixes various stability issues seen on new boards
with the old setup.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arm: mach-imx: add MMDC and CCM register defines for use in DCD ...

Makes .imxcfg files a lot more readable.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX: tqma53: remove cpu_to_be32( from imx script ...

Remove leftovers from previous conversion from C code to imxcfg
script.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: mvebu: Add Plat'home's Kirkwood Openblocks A6 board support ...

This commit adds a new Marvell Kirkwood-based board, by following the currently
supported boards.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/usb'

Merge branch 'for-next/rtc' ...

Conflicts:
	arch/mips/dts/jz4755.dtsi
	commands/Makefile

Merge branch 'for-next/misc' ...

Conflicts:
	lib/Makefile

Merge branch 'for-next/metadata' ...

Conflicts:
	arch/arm/dts/Makefile
	common/Makefile
	lib/Makefile

Merge branch 'for-next/marvell'

Merge branch 'for-next/imx'

Merge branch 'for-next/canon'

Merge branch 'for-next/arm'

Merge branch 'for-next/am335x'

Add support for metadata in barebox images ...

It's often useful to get some information about a barebox image
before starting or flashing it. This patch introduces barebox
Image MetaData (IMD). When enabled a barebox image will contain
a list of tags containing the desired information. We have tags
for:

- the barebox release (2014.07.0-00160-g035de50-dirty)
- the build timestamp (#741 Mon Jul 28 15:08:54 CEST 2014)
- the board model the image is intended for
- the device tree toplevel compatible property

Also there is an additional generic key-value store which stores
parameters for which no dedicated tag exists. In this patch it
is used for the memory size an image supports.

Since there is no fixed offset in a barebox image which can be
used for storing the information, the metadata is stored somewhere
in the image and found by iterating over the image. This works
for most image types, but obviously not for SoC images which are
encoded or encrypted in some way.

There is a 'imd' tool compiled from the same sources for barebox,
for the compile host and for the target, so the metadata information
is available whereever needed.

For device tree boards the model and of_compatible tags are automatically
generated.

Example output of the imd tool for a Phytec phyFLEX image:

build: #889 Wed Jul 30 16:08:54 CEST 2014
release: 2014.07.0-00167-g6b2070d-dirty
parameter: memsize=1024
of_compatible: phytec,imx6x-pbab01 phytec,imx6dl-pfla02 fsl,imx6dl
model: Phytec phyFLEX-i.MX6 Duallite Carrier-Board

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

make: build device trees with obj-dtb-y and pbl-dtb-y ...

To build an object file from a device tree currently we currently
have to add them to the Makefile twice, once to dtb-y and once to
obj-y. This patch introduces obj-dtb-y and pbl-dtb-y to directly
compile a device tree object file for inclusion in the barebox binary
or the pbl respectively.
The now unneeded dtb-y targets are removed.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

move file helper functions to separate file ...

We have our file helper functions in several places. Move them
all to lib/libfile.c.
With this we no longer have file helpers in fs/fs.c which contains
the core fs functions and no functions in lib/libbb.c which are
not from busybox.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: AM335x: Beaglebone: enable ethernet ...

The ethernet mac and mdio nodes must be explicitly enabled to override
the disabled setting in am33xx.dtsi.

Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: versatilepb_defconfig: enable RTC support ...

Use this qemu cmdline to test hwclock

  $ qemu-system-arm -M versatilepb -nographic \
      -monitor null -kernel barebox -serial stdio

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>