Merge branch 'for-next/misc'

Merge branch 'for-next/arm'

sizes.h: move include/sizes.h to include/linux/sizes.h ...

This file originates in Linux.  Linux has it under include/linux/
directory since commit dccd2304cc90.
Let's move it to the same place as well in barebox.

This commit was generated by the following commands:

  find -name '*.[chS]' | xargs sed -i -e 's:<sizes.h>:<linux/sizes.h>:'
  git mv include/sizes.h include/linux/

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: cpsw: ignore error on slave setup ...

The CPSW has two slaves. When one of them fails to setup continue
anyway with the other one. This fixes a crash in the beaglebone black
which only has one slave connected. The code doesn't find a phy on
the second slave and bails out, but the error path is broken: It frees
the private data structures which contains used resources.

Reported-by: Philippe Leduc <ledphilippe@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: smc1111: fix memory congestions ...

As the SMC1111 has a shared pool of 2k memory buckets for both
transmission and reception, and as there are variants which have as few
as 4 buckets in total, the memory pool can be hogged by unclaimed
receptions, and impeed any further transmission.

This happens on the zylonite pxa board, where 4 packets, most probably
icmp and arp, fill the 4 buckets, preventing any further ethernet
transmission, and stalling the driver.

The fix is rather rough : whenever all the buckets are filled by
reception packets, and if a transmission is required, the transmission
code path will empty up all received packets.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: smc1111: move print_packet function ...

Fix for a compiler complaint, because print_packet is needed by a
function before it is declared.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: rtl8169: remove unnecessary cache maintenance ...

The buffer descriptors are allocated from coherent memory, so there
is no cache maintenance needed. Only tell the compiler that the descriptors
can be modified by the hardware.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/randconfig'

Merge branch 'for-next/marvell'

Merge branch 'for-next/imx'

net: fec_imx: remove unused includes ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: rtl8139: depend on MIPS ...

Until we sort out the dma-mapping mess.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: fec_imx: Add i.MX6sx compatible entry ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: ethoc: depend on OPENRISC ...

This driver currently only works on OpenRISC, as it uses
the cache flush/invalidate functions of this arch.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: Add driver for Armada 370/XP 10/100/1000 Mbps network controller ...

This patch introduces the mvneta driver to support the network controller
found in Armada 370/XP SoCs.

Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: phy: Support Marvell 88EE1543 PHY ...

This commit adds support for Marvell's 88E1543 PHY chip. This chip is
almost identical to the 88EE1545, except the 88E1545 supports QSGMII
and the 88EE1543 supports SGMII.

Therefore, the same configuration function is used for both PHYs. For now,
the only initialization provided for the 88EE1543 is the LED setup.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: phy: Support Marvell 88EE1545 PHY ...

This commit adds support for Marvell's 88E1545 PHY chip. In particular, this
allows to support QSGMII interfaces.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: phy: marvell: Fix array identation ...

Just a cosmetic clean-up to fix the indentation of the entries
in the phys array.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/tegra'

Merge branch 'for-next/misc'

net: rtl8169: clean receive buffer after net handler ...

The processing of the buffer might change some data, which
will eventually trigger a cache writeback later on, corrupting
data written by the network chip. Clean the cache range
to make sure there is no writeback pending.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: rtl8169: add support for RTL-8168/8111g ...

This is the version of the chip found on Jetson-TK1.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: cpsw: Set phy device_node pointer in probe ...

Set the phy device_node pointer to the equivalent cpsw slave node.
We need this, because phy drivers using this pointer for their configuration.

Create and register the phy device in cpsw_probe(), so that this phy device
can be found later by phy_device_connect() in cpsw_open().

Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: phy: micrel: Add OF conf. support for ksz9031 ...

Adds support for ksz9031 PAD skew configuration over devicetree.
Based on a patch from the linux kernel.

Author: Hubert Chaumette <hchaumette@adeneo-embedded.com>
Original commit: 6e4b827

Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: cpsw: Fix probe for one port ethernet ...

If only one port is pinned out, probe fails
as the second port phy_id is not found.

Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: micrel: Add ksz8081 support ...

Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: cpsw: Allow gigabit connection ...

Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: add rtl8169 driver ...

This adds the driver for RealTek 8169 and compatible
pci attached network chips.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/resource-err-ptr'

Merge branch 'for-next/phycore-imx6'