LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

History for barebox / arch

2015-01-30	3113eaf Browse files » ARM: delete useless and wrong comments ... These comments are wrong. Anyway, they do not carry useful information. Delete. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Masahiro Yamada authored on 29 Jan 2015 Sascha Hauer committed on 30 Jan 2015
2015-01-29	a114e9b Browse files » ARM: i.MX6: use generic calculation in nand bbu handler ... The parameters ECC Strength, BadBlockMarkerByte and BadBlockMarkerStartBit in the FCB structure depends on the nand chip's pagesize and oobsize. Instead of hardcoding these values into the imx6 bbu handler calculate these values on the fly. Therefore we export the necessary functions from the nand_mxs driver to use them in the bbu handler. Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Stefan Christ authored on 28 Jan 2015 Sascha Hauer committed on 29 Jan 2015
2015-01-29	abf0033 Browse files » ARM: atmel: sama5d4: nand: add has_pmecc parameter ... Add the missing has_pmecc parameter for sama5d4 based boards. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Bo Shen authored on 28 Jan 2015 Sascha Hauer committed on 29 Jan 2015
2015-01-28	41e3d1c Browse files » imx6: add partitions on SPI NOR for PFLA02 ... Add partitions oftree and kernel on SPI NOR and increase size of barebox and barebox-environment partition. Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Stefan Christ authored on 28 Jan 2015 Sascha Hauer committed on 28 Jan 2015
	420e4cb Browse files » ARM: i.MX6: Fix bad block marker in imx6-bbu-nand handler ... The i.MX6 NAND update handler sets all bytes of OOB data to 0x00 in pages that contain the FCB structure currently. So the first and second byte which is used as the manufacturers bad block marker is in the 'bad block' state. A scan for factory bad blocks will detect these blocks as bad while they are still ok. The barebox issues a scan for factory bad blocks to rebuild the bad block table if the NAND is brand new or the last four blocks of flash are erased. To fix this problem set the first two bytes of OOB data to 0xFF explicitly. There is a potential chance that the bbu handler will mark a real bad block as factory good. That's not a problem for the ROM Loader, because the FCB is protected by a checksum and the hamming_13_8 encoding. Additionally the current implementation of the bbu handler does not check the bad block table or the factory bad block marker before writing the FCB at the first page of the first and second block. Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Stefan Christ authored on 27 Jan 2015 Sascha Hauer committed on 28 Jan 2015
	51eb7dd Browse files » dts:imx6:pfla02: Align nand partitions by 512k ... NAND chip used on phyFLEX-i.MX6 with 4GB NAND (MT29F32G08AFACAWP) has 512k eraseblock size. Align NAND partitions by 512k to fix erase fails. Also increase barebox-environment and oftree partitions to be two eraseblocks. This will ensure safety in case of bad block. Signed-off-by: Dmitry Lavnikevich <d.lavnikevich@sam-solutions.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Dmitry Lavnikevich authored on 27 Jan 2015 Sascha Hauer committed on 28 Jan 2015
	f4e1969 Browse files » boards: remove hardcoded MAC addresses ... There should be no hardcoded MAC addresses in the default environments. Remove them. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 28 Jan 2015
	cf6626d Browse files » ARM: phyFLEX-i.MX6: Add support for 1GB on 1 bank ... Add support phyFLEX-i.MX6 SOM with 1GB on one ram bank Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Christian Hemp authored on 26 Jan 2015 Sascha Hauer committed on 28 Jan 2015
	1a63678 Browse files » ARM: MXS: Add regulator debug print ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 28 Jan 2015
	e0c61f3 Browse files » ARM: MXS: Setup vdda in power prep ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 28 Jan 2015
	f765925 Browse files » ARM: MXS: ocotp: Add devicetree support ... Add the device tree compatible strings. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 28 Jan 2015
	f3ff746 Browse files » ARM: MXS: Create ocotp device in SoC code ... The ocotp device is completely SoC internal, no need to register it from boards. Register it from SoC code instead. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 28 Jan 2015
	478ea1c Browse files » ARM: MXS: Make gpio a driver ... This turns the MXS gpio support into a driver. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 28 Jan 2015
	2a0f2d4 Browse files » ARM: MXS: Do not register devices with device tree support ... When a device tree is present the SoC internal devices come from it, so do not register them as platform devices. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 28 Jan 2015
	c722646 Browse files » MXS: power-init: inline only once used functions ... mxs_power_init_4p2_params and mxs_power_init_4p2_regulator are used only once, so inline the code. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 28 Jan 2015
	39189a5 Browse files » ARM: MXS: Fix vddd brownout setting ... The brownout setting can be at maximum 7*25mV below the voltage setting of the regulator. Set it to the minimum Voltage which is 1325mV. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 28 Jan 2015
2015-01-23	2d8d5e8 Browse files » ARM: atmel: sama5d3xek: let gmac auto detect phy id ... On the SAMA5D33 and SAMA5D35 the GMAC PHY ID is 1 while not 7. So, let the GMAC auto detect phy id, or else hard code to 7, it can not work on these two boards. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Bo Shen authored on 19 Jan 2015 Sascha Hauer committed on 23 Jan 2015
2015-01-23	aa61a8d Browse files » ARM: atmel: sama5d3xek: let emac auto detect phy addr ... On the SAMA5D35 the EMAC phy addr is 1 while not 0. So, let the EMAC auto detect phy addr, or else hard code to 0, the ethernet can not work on SAMA5D35 board. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Bo Shen authored on 22 Jan 2015 Sascha Hauer committed on 23 Jan 2015
2015-01-21	f8ba8d6 Browse files » sandbox: get malloc_size from .config ... Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 20 Jan 2015 Sascha Hauer committed on 21 Jan 2015
	ea1f206 Browse files » ARM: atmel: sama5d3xek: fix conflict between w1 and led ... As the 1-wire and LED d2 use the same pin (PE25) on the EK board. So, make LED enable only when the 1-wire is disabled. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Bo Shen authored on 20 Jan 2015 Sascha Hauer committed on 21 Jan 2015
	124e3d3 Browse files » ARM: atmel: sama5d4 xplained: fix mci1 power pin ... Correct the mci1 power pin from PE15 to PE4. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Bo Shen authored on 20 Jan 2015 Sascha Hauer committed on 21 Jan 2015
2015-01-20	c69237d Browse files » ARM: MXS: imx28evk: Update environment and config ... This switches the imx28evk to new environment and updates the defconfig file for tons of new features. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 20 Jan 2015
	93ba78e Browse files » ARM: MXS: imx28evk: Add lowlevel support ... This switches the imx28evk to multiimage support and adds the lowlevel initialization to make the bootlets unnecessary. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 20 Jan 2015
	0ab72e0 Browse files » ARM: dts: am335x-phytec-phyflex: Add USB host support ... Add USB host support for the phyflex-som. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Wadim Egorov authored on 19 Jan 2015 Sascha Hauer committed on 20 Jan 2015
	d079fbd Browse files » ARM: dts: am335x-phytec-phycore-som: Add USB host support ... Add USB host support for all phycore-som based boards. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Wadim Egorov authored on 19 Jan 2015 Sascha Hauer committed on 20 Jan 2015
2015-01-19	3155f5d Browse files » ARM: pxa: add the zylonite board ... Add the first pxa3xx board, zylonite. Zylonite is the Marvell System Development Platform. Several version are available, based on either : - PXA300 - PXA310 - PXA320 This version was only tested on a PXA310 based board, and uses : - the ethernet controller - the nand controller These drivers seem to be common to all zylonite boards. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Robert Jarzmik authored on 9 Jan 2015 Sascha Hauer committed on 19 Jan 2015
	e340ce0 Browse files » ARM: pxa: add pxa3xx architecture ... Add the pxa3xx architecture, for pxa300, pxa310 and pxa320 SoCs. This includes : - the registers - the cpu type - the reset source handling - a minimal set of clocks - pin control definitions In this last case, the big mfp-pxaxxx.h files were dropped, forcing board developers to use MFP_LPM_* macros cunningly. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Robert Jarzmik authored on 9 Jan 2015 Sascha Hauer committed on 19 Jan 2015
	8e876a8 Browse files » ARM: pxa: move pxa2xx functionality to SoC specific file ... Move reset_source detection and poweroff to pxa2xx.c, to prepare the incoming pxa3xx reset_source detection. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Robert Jarzmik authored on 9 Jan 2015 Sascha Hauer committed on 19 Jan 2015
	49827f7 Browse files » arm: board: virt2real: build lowlevel in proper target ... Fixes build with PBL enabled. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 18 Jan 2015 Sascha Hauer committed on 19 Jan 2015
	ff0b882 Browse files » ARM: IMX: Embedsky E9: Choose right environment when booting from SD or EMMC. ... Signed-off-by: Andrey Panov <rockford@yandex.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Panov authored on 17 Jan 2015 Sascha Hauer committed on 19 Jan 2015