net: smc1111: fix platform data initializations ...

The configuration and control setup introduced in commit "extend the
driver for 91c94 and 91c96 support" suffers from a typo defect, which
makes the commit broken.

The typo happens to be in barebox tree, while it's not in the tested
patches I had, and there was a mismatch in my former submission, which
is fixed by this patch.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: mvneta: Fix transmit errors due to dirty txdesc ...

Marvell Neta's transmit descriptor (txdesc) is allocated by dma_alloc_coherent()
but not zeroed before calling mvneta_send the first time. This can cause spurious
transmit errors due to improperly set bits in txdesc's cmd_sts field.

Fix initial transmit errors by always writing whole cmd_sts field instead of ORing
the bits.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

pci: make sure to activate devices on the root bus ...

Commit b8a1bb1dd215 (pci: defer device registration until after bridge setup)
changed the activation order of devices, so that bridges above the devices could
be configured properly before activating the devices below. This commit failed
to acknowledge that there may be devices located directly on the root bus without
any bridge in between and so those devices would never get enabled.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>

mtd: nand_omap_gpmc: Fix ecc check for bch8 romcode ...

The bch8 romcode was only checked and corrected for the
first 512 bytes of a 2048 byte page. Set interation counter
and eccsizes correct for the different bch types.

Tested OMAP_ECC_BCH8_CODE_HW and OMAP_ECC_BCH8_CODE_HW_ROMCODE.

Reported-by: Gabor Janak <g.janak@agilion.de>
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: nand_omap_gpmc: Remove unused code ...

The ecc layout structs are not used anywhere.

Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

usb: host: xhci: depend on HAS_DMA ...

The driver needs the dma coherent function and thus can
only work on architectures implementing them.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: fractional-divider: fix build with CONFIG_MODULES ...

Fixes:
error: 'clk_register_fractional_divider' undeclared here

introduced with commit 22a0c31c9265 (CLK: Add fractional
divider clock support from Linux kernel)

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci: core: Check return value of dev_add_param_bool ...

Commit 03b59bd changed the
return values of dev_add_param_* to ERR_PTR(-ENOSYS) and broke a few boards.
We have now to care about the return value of dev_add_param_bool() in
mci_register().

Also set the ret variable when dev_add_param_bool() fails.

Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: mvneta: convert to streaming DMA ops ...

Move to the common streaming DMA ops in order to get rid of
the direct usage of the ARM MMU functions for the cache
maintenance.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

PCI: fix bad bugs in bridge setup code ...

Add the required brackets, so that we don't write unused registers
with potentially bogus values.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: clk-divider: fix _get_maxdiv for table based divider ...

The divider lacks the code for calculating the maximum divider for table
based dividers. Add it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MMC: dw_mmc: PIO mode fixes ...

Simplify PIO mode routines.
Fix a bug when IO is possibly performed twice because of using old
interrupt status.
Support for slow-speed card writes.

Signed-off-by: Andrey Panov <rockford@yandex.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/tegra'

Merge branch 'for-next/streaming-dma' ...

Conflicts:
	drivers/mci/dw_mmc.c

Merge branch 'for-next/rockchip' ...

Conflicts:
	arch/arm/Kconfig

Merge branch 'for-next/misc'

Merge branch 'for-next/imx'

PWM: i.MX: register successfully without alias ...

When a PWM does not have an of alias generate a name from the
base address so that we can register it successfully.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/sandbox-of'

Merge branch 'for-next/mtd-partitions'

Merge branch 'for-next/mtd'

usb: host: ohci: convert to streaming DMA ops ...

Move to the common streaming DMA ops in order to get rid of
the direct usage of the ARM MMU functions for the cache
maintenance.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

usb: host: ehci: convert to streaming DMA ops ...

Move to the common streaming DMA ops in order to get rid of
the direct usage of the ARM MMU functions for the cache
maintenance.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

usb: gadget: fsl_udc: convert to streaming DMA ops ...

Move to the common streaming DMA ops in order to get rid of
the direct usage of the ARM MMU functions for the cache
maintenance.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: xgmac: convert to streaming DMA ops ...

Move to the common streaming DMA ops in order to get rid of
the direct usage of the ARM MMU functions for the cache
maintenance.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: rtl8169: convert to streaming DMA ops ...

Move to the common streaming DMA ops in order to get rid of
the direct usage of the ARM MMU functions for the cache
maintenance.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: orion-gbe: convert to streaming DMA ops ...

Move to the common streaming DMA ops in order to get rid of
the direct usage of the ARM MMU functions for the cache
maintenance.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: macb: convert to streaming DMA ops ...

Move to the common streaming DMA ops in order to get rid of
the direct usage of the ARM MMU functions for the cache
maintenance.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: fec: convert to streaming DMA ops ...

Move to the common streaming DMA ops in order to get rid of
the direct usage of the ARM MMU functions for the cache
maintenance.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: designware: convert to streaming DMA ops ...

Move to the common streaming DMA ops in order to get rid of
the direct usage of the ARM MMU functions for the cache
maintenance.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>