driver: Call bus->remove instead of driver->remove ...

In devices_shutdown we should call the busses remove function
which in turn calls the drivers remove function. Otherwise for
example PCI devices never get removed since they do not have
a remove function but a pcidev->remove function instead.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

driver: Call remove function only when available ...

The bus implementations currently call the drivers remove
hook unconditionally, but this hook is seldomly populated. Only call
it when it's actually populated.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

driver: fix device remove order ...

The active list is supposed to collect active devices in the
opposite order they are probed. This is used to remove the
devices in the correct order in devices_shutdown. The order
is wrong though when in a drivers probe function other devices
are registered. To get the order right we have to add the new
device to the active list before it is probed.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

drivers: remove unused function dev_protect() ...

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

resource: dev_request_mem_region: fix return value for MIPS ...

The commit

    commit 0d7a213
    Author: Antony Pavlov <antonynpavlov at gmail.com>
    Date:   Wed Sep 10 11:42:19 2014 +0400

        MIPS: dts: use physical addresses (as Linux does)

        With IOMEM() adapted for MIPS we can use physical addresses
        in device tree reg property.

has switched MIPS dts files to physical addresses usage.

The patch was tested on qemu, but qemu malta board is tolerant
of using physical addresses for accesing to device
(Ingenic JZ4755 and JZ4780 processors are tolerant too!).
But other CPUs (e.g. Loongson LS1B) can throw an exception
in this situation.

Additional physical address to virtual address translation
on MIPS is needed.

We already have this in include/common.h

    #if defined(CONFIG_MIPS)
    #include <asm/addrspace.h>

    #define IOMEM(addr) ((void __force __iomem *)CKSEG1ADDR(addr))
    #else
    #define IOMEM(addr) ((void __force __iomem *)(addr))
    #endif

So use IOMEM() to fix dev_request_mem_region() return value.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

driver: workaroud resource request that conflicts with errno PTR ...

broken since

commit ed6e965
Author:     Sascha Hauer <s.hauer@pengutronix.de>
resource: Let dev_request_mem_region return an error pointer

Introduce dev_request_mem_region_err_null

only used on platform like at91 where the resource address conflicts
with errno PTR.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/resource-err-ptr'

Introduce message logging support ...

This adds a buffer for log messages and a 'dmesg' command to
print the messages. The log buffer is implemented as log objects
rather than a string buffer. This makes it easy to implement
limiting the messages, cleaning the buffer and timestamping
the messages.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

resource: Let dev_request_mem_region return an error pointer ...

For all users fix or add the error check.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

resource: Let dev_request_mem_region_by_name return an error pointer ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

resource: Let dev_get_mem_region return an error pointer ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>

resource: Let dev_get_resource return an error pointer ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

resource: Let request_iomem_region return an error pointer ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

resource: Let dev_get_mem_region_by_name return an error pointer ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

resource: Let dev_get_resource_by_name return an error pointer ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

common: Allow for I/O mapped I/O ...

Rework the current framework so that I/O mapped I/O resources are
also possible.

Signed-off-by: Michel Stam <michel@reverze.net>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/mtd' ...

Conflicts:
	drivers/mtd/core.c
	net/eth.c

device: remove parameters when unregistering a device ...

Otherwise we loose memory on each device_unregister. The ethernet
code used to do this before calling unregister_device. This can
now be removed.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

device: init bus list ...

bus_list is only initialized when the device has a bus, but it
needs to be initialized in unregister_device, so initialize the
list unconditionally.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

i2c/spi: match of_modaliases ...

i2c/spi devices in the devicetree often come with a "vendor,device"
comaptible string. These do not match in barebox, so add a
device_match_of_modalias function which does exactly that.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: dm9k: Fix resource sizes in add_dm9000_device ...

The dm9000 needs a resource for an index register and one for
the data register. Both should have a size of the access width,
and not two times the access width. The current code is probably
a leftover when the dm9000 had only one resource.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/omap-drivers'

device: Add functions to add resources ...

We currently have functions to add a device based on function parameters.
This adds the corresponding functions to add resources to a device without
registering the device itself. This is useful to manipulate devices before
registering them.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

treewide: Add missing includes ...

A lot of files rely on include/driver.h including include/of.h (and
this including include/errno.h. include the files explicitly so we can
eventually get rid of including of.h from driver.h

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/misc' ...

Conflicts:
	commands/Makefile

introduce runtime loglevel ...

With this the verbosity of barebox can be controlled during runtime
using the 'loglevel' globalvar.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

move devinfo command to its own file ...

Just like nearly all other commands are in individual files.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

base: Transform "platform_match" into "device_match" and make this function public ...

This change will allow reuse this function for other buses.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

driver: implement device_detect_by_name function ...

It becomes a common pattern for boards to find a device and
call device_detect on it. Add a convenience wrapper for it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

devices: add detect mechanism ...

We often encounter the situation where slow devices should not be
probed during startup since probing is slow and maybe unnecessary
for unused devices. With MMC we have the 'probe' device parameter,
for ata we have the same, for USB we have the 'usb' command. Overall
this is not very consistent.
With MMC there is the additional problem that the probe parameter
is attached to the logical device when we often have the information
which physical device we want to probe.
This patch adds a 'detect' callback for devices and adds a command
to detect devices and to list the devices which are actually detecable.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>