i.MX: Move UART definitions into a separate file ...

Move UART definitions into a separate file to avoid redefinition in
<mach/debug_ll.h> and magical constants in low level UART
initialization code.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/of-device-id'

Merge branch 'for-next/mvebu'

Merge branch 'for-next/misc'

Merge branch 'for-next/imx'

Merge branch 'for-next/defer'

net: phy: Do not double remove phy device ...

This fixes: 80264a8 driver: Call bus->remove instead of driver->remove

On mvebu it happens that:

Upon device shutdown, when iterating through the active device list,
the phy0 device is removed before mdio-mvebu. Then, when the mdio bus
device is removed, the phy0 device is removed again, here:

mdio_bus_remove(on mdio-mvebu)
  mvebu_mdio_remove
    mdiobus_unregister
      unregister_device
        mdio_bus_remove(on phy0)

Fix this by setting the mdio busses phy_map[phy->addr] to NULL when
unregistering the phy device, so that mdiobus_unregister no longer
finds a valid phy_device when iterating over the busses device list.

Reported-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>

usb: increase USB_CNTL_TIMEOUT to match linux ...

USB requests should be processed within a timeframe of 5s.
The linux kernel also uses this timeout value for the control packets.

For the musb the increase in timeout helps successfully probing USB devices
(at least on one test hardware), but on the other hand doesn't slow down the
system, if there are no devices, i.e. the timeout never hits. That means,
that the USB core correctly aborts instead of timing out.
Why and how the 100ms was chosen in the first place, can not be deduced from
the git history, just that it seems to work fine for most boards.

Change USB_CNTL_TIMEOUT to 5000ms and replace all occurences of
	`USB_CNTL_TIMEOUT * x`
with just
	`USB_CNTL_TIMEOUT`,
as the timeout is now large enough without it.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: of_mtd_fixup(): fix given DT not the default one ...

We have to start searching for the mtd node starting in the given root node not
the defaukt (= barebox internal) one. This means the internal DT is always
fixed up. This leads to booting not fixed up DT when using external DTs.

This patch fixes the problem.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: fec: Fix RGMII-ID ...

RGMII-ID just defines transmitter internal delays. Otherwise it is the
same as RGMII. As the differences only influence the behaviour of the
phy, the fec driver should handle it the same way as RGMII.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

PCI: imx6: simplify config access code ...

The PCI core fills in the primary bus number, so there is no
need to walk up the PCI hierarchy in the driver manually.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

PCI: fill in bus primary field ...

This was erroneously left uninitialzed as nothing was using it.
The i.MX6 PCI driver needs this to be filled properly to decide
if a config space access is allowed for a specific devfn.

This fixes PCI enumeration on the Gateworks GW54xx board.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

PCI: register and active bridge device before proceeding to scan ...

The bridge device needs to be registered and activated before
the scanning can proceed, as the bridge is the parent for other
devices.

This fixes a NULL ptr derefernce when scanning PCI hierarchies
with bridges behind bridges.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: use 'const void *' for struct of_device_id.data ...

Since 2011 barebox' of_device_id struct uses unsigned long type for data field:

    struct of_device_id {
            char *compatible;
            unsigned long data;
    };

Almost always struct of_device_id.data field are used as pointer
and need 'unsigned long' casting.

E.g. see 'git grep -A 4 of_device_id drivers/' output:

    drivers/ata/sata-imx.c:static __maybe_unused struct of_device_id imx_sata_dt_ids[] = {
    drivers/ata/sata-imx.c- {
    drivers/ata/sata-imx.c-         .compatible = "fsl,imx6q-ahci",
    drivers/ata/sata-imx.c-         .data = (unsigned long)&data_imx6,
    drivers/ata/sata-imx.c- }, {

Here is of_device_id struct in linux kernel v4.0:

    struct of_device_id {
            char name[32];
            char type[32];
            char compatible[128];
            const void *data;
    };

Changing of_device_id.data type to 'const void *data' will increase
barebox' linux kernel compatibility and decrease number of 'unsigned
long' casts.

Part of the patch was done using the 'coccinelle' tool with the
following semantic patch:

    @rule1@
    identifier dev;
    identifier type;
    identifier func;
    @@
    func(...) {
    <...
    - dev_get_drvdata(dev, (unsigned long *)&type)
    + dev_get_drvdata(dev, (const void **)&type)
    ...>
    }
    @rule2@
    identifier dev;
    identifier type;
    identifier func;
    identifier data;
    @@
    func(...) {
    <...
    - dev_get_drvdata(dev, (unsigned long *)&type->data)
    + dev_get_drvdata(dev, (const void **)&type->data)
    ...>
    }

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: e1000: add HAS_DMA dependency ...

The e1000 driver uses the dma coherent functions
and thus can only be build for architectures implementing them.

Here is mips malta build error log:

  drivers/built-in.o: In function `e1000_transmit':
  drivers/net/e1000.c:(.text.e1000_transmit+0x80): undefined reference to
  `dma_sync_single_for_device'
  drivers/built-in.o: In function `e1000_poll':
  drivers/net/e1000.c:(.text.e1000_poll+0x60): undefined reference to
  `dma_sync_single_for_cpu'

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: cpsw: unregister device on remove callback ...

The CPSW uses DMA, so we should quiesce the device before leaving
barebox. This patch unregisters the CPSW properly on the device
remove callback. To do this we have to fix the error path in
cpsw_slave_setup, since this function can fail and we need a
known slave status in the remove function.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: phy: Add missing phy_unregister_device ...

The counterpart of phy_register_device is missing. Add it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

usb: musb: set controller->priv pointer ...

This is used by the detect callback but never initialized.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

usb: musb: dsps: Do not use priv pointer ...

Use container_of instead of dev->priv pointer. dev->priv is
used by the musb core layer (which maybe should not be the
case, but using container_of is good anyway).

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: partition: Fix OF partition fixup ...

To get the number of address cells and size cells we have to use
the newly created partition node, not the parent device node. The
parent device node returns the address/size cells of the controller
node, not the partition node.

On an am335x machine this fixes the device tree passed to Linux.
The situation there is:
	...
	gpmc@50000000 {
		...
		#address-cells = <0x2>;
		#size-cells = <0x1>;
		ranges = <0x0 0x0 0x8000000 0x10000000>;
		...
		nand@0,0 {
			reg = <0x0 0x0 0x0>;
			#address-cells = <0x1>;
			#size-cells = <0x1>;
			...
			partition@7 {
				label = "system";
				reg = <0x220000 0x7de0000>;
			};
		};
	};

and without this patch barebox passes three bytes for
partition@7's reg property instead of only two which naturally
confuses Linux and yields to the system partition to start at 0
with a size of 0x220000.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

net: usb: asix: Add D-link DUB-E100 H/W Ver C1 support ...

Hello!

This patch adds support for USB ethernet adapter D-Link DUB-E100 H/W Rev C1. I tested this on
Beagleboneblack Rev A6A and our custom h/w based on i.mx6 Phytec phycore module. More
information about the adapter is here:
http://us.dlink.com/products/connect/high-speed-usb-2-0-fast-ethernet-adapter/

Signed-off-by: Mayur Nande <mayur.nande@medel.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

bus: mvebu-mbus: Convert mbus platform driver to direct driver ...

Registering mbus driver as platform driver is a little late for
some register accesses to work. We have to make sure boot-up
mbus windows are disabled early, so call mbus driver directly
from SoC init.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

bus: mvebu-mbus: Drop device reference ...

Prior converting mbus driver from a platform device back to directly
called SoC driver, drop the device_d reference and covert dev_foo to
pr_foo.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

bus: mvebu-mbus: Remove coherency attribute ...

Marvell Armada 370 and XP have some coherency fabric. We are not
interested in using it, so remove checking for it in mbus driver.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

spi: Add SPI GPIO bitbang driver ...

This adds a driver for SPI master by GPIO pins.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

spi: ath79: move spidelay from spi-bitbang-txrx ...

Bitbang helpers for SPI require spidelay. This should be set
by the user and not the helper itself. Move it to ath79_spi
instead.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

gpio: Add driver for 74x164 compatible shift-registers ...

A 74x164 shift register can be seen as a SPI attached GPIO expander.
This adds a driver for those poor-man expanders based on the Linux
driver.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: phy: Support Marvell 88E1318S PHY ...

This adds support for the Marvell 88E1318S Gigabit Ethernet PHY.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of_path: of_find_path(): add possibility to return .bb device ...

This patch adds a flags argument to the of_find_path() function. The only flag
defined for now is OF_FIND_PATH_FLAGS_BB. When used on NAND devices, the
function returns the bad block aware device (the ".bb" device).

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ubi: cdev: remove trailing newline from debug messages ...

This patch removes the trailing newline "\n" from the ubi/cdev.c debug
messages, as the macro ifself already adds a newine.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>