pinctrl: imx-iomux-v2: correct names in EXPORT_SYMBOL macros ...

The functions have been renamed, but this has not been reflected in the
EXPORT_SYMBOL macros. Do that now.

Fixes several errors like this:
drivers/pinctrl/imx-iomux-v2.c:61:15: error:
	'mxc_iomux_mode' undeclared here (not in a function)
 EXPORT_SYMBOL(mxc_iomux_mode);

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: enc28j60: fix set mac function signature ...

Fixes:
drivers/net/enc28j60.c: In function 'enc28j60_probe':
drivers/net/enc28j60.c:947:20: warning: assignment from incompatible pointer type
  edev->set_ethaddr = enc28j60_set_ethaddr;

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

video: backlight-pwm: depend on GPIOLIB ...

The PWM backlight driver does not only control PWMs but also GPIOs.

Fixes:
In file included from include/gpio.h:4:0,
                 from drivers/video/backlight-pwm.c:27:
arch/arm/include/asm/gpio.h:5:23: fatal error: mach/gpio.h: No such file or directory

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/blspec'

Merge branch 'for-next/pwm'

Merge branch 'for-next/omap' ...

Conflicts:
	arch/arm/boards/beagle/board.c

Merge branch 'for-next/mtd' ...

Conflicts:
	drivers/mtd/core.c

Merge branch 'for-next/misc'

Merge branch 'for-next/imx-bbu-nand-fcb' ...

Conflicts:
	common/Kconfig

Merge branch 'for-next/cfi-flash'

usb: musb: Use proper timeout loop ...

Poll for a well defined time in musb_init. The current counting loop
takes too short for some devices. Tested on OMAP3 with a rather slowish
memory stick.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

bus: omap-gpmc: Add Generic device support ...

This adds support for generic devices like NOR flash and
ethernet to the gpmc bus driver.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: export of_platform_device_create ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

bus: omap-gpmc: fix wrong bit setting ...

GPMC_CONFIG4_WEEXTRADELAY should be set depending on we_extra_delay,
not on oe_extra_delay. This seems to be copy-pasted from two lines above.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: m25p80: Fix Kconfig dependencies ...

The m25p80 driver now depends on MTD_SPI_NOR which is disabled in all
defconfigs, so this effectively disables the m25p80 driver in all
defconfigs. Fix this by selecting MTD_SPI_NOR which is library code
without further dependencies. Also let m25p80 depend on SPI because
it needs the SPI code and won't link without it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: m25p80: make flash_name const ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: Make devname argument to add_mtd_device const ...

add_mtd_device duplicates the string where necessary, so make it
const.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MCI: pxa: depend on right symbol ...

Now that we also have PXA3XX support the dependency on
ARCH_PXA is too broad for this driver.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

usb: gadget: pxa27x: depend on right symbol ...

Now that we also have PXA3XX support the dependency on
ARCH_PXA is too broad for this driver.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: smc911x: Add device tree support ...

There should probably be more compatible entries, but this is what
the kernel driver matches for.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

serial: ns16550: Fix reading clock-frequency property ...

The clock-frequency property is never read because the driver
bails out earlier when it is unable to clk_get the clk. Move
the clock-frequency read out to the dt setup code which is
executed before the driver bails out due to the missing clk.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: Make set_ethaddr argument const ...

The set_ethaddr callback should not modify the MAC address passed to it, so
make it const.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ubi: Lower 'already attached' message to debug level ...

The caller will show a message, no need to do this in UBI. This
is for the case when mtd_detect calls ubi_attach_mtd_dev. mtd_detect
does not know whether this is already attached and it's not an error.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: detect ubi devices automatically ...

Hook UBI attachment into the mtd class devices detect function. This
makes it possible to attach ubi devices with 'detect nand0.root'.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ubi: Use preditable device names ...

Instead of naming all ubi devices and cdev names ubi<num> append
'.ubi' to the original mtd name. This makes ubi device and cdev
names predictable. With this ubi0 becomes nand0.root.ubi. Also
do the same for volume names, so ubi0.root becomes nand0.root.ubi.root.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

driver: detect: detect parent devices aswell ...

Let device_detect_by_name detect parent devices aswell. We
separate the devname strings by colons and call device_detect()
for each component. This makes it possible for example to

detect nand0.root.ubi.root

With the above detect will be called for nand0, nand0.root, nand0.root.ubi
and nand0.root.ubi.root. The nand0.root detection step will detect the
UBI volume and attach it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

PCI: remove bogus host bridge setup skipping ...

Apparently this was here to fix issues with some QEMU version,
but hasn't worked in the intended way for a long time. The probe
code should be mature enough by now, so this workaround isn't
needed anymore.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

PCI: rework BAR size calculation ...

The probe code now does a much better job at detecting bad BARs.
Also make sure to preserve any previous content of the BAR
registers if we don't relocate them.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: cfi-flash: Add mtd concat support ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: Add mtd concat support ...

The mtd concat layer supports concatenating several MTD devices
into a single one. This is nearly as-is from the corresponding
Kernel code.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>