LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

History for barebox / arch

2015-10-26	1678dcf Browse files » ARM: imx: clocksource: add new DT compatible ... The i.MX6 DL/S DT has been changed to use more specific compatibles as GPTv2 has a different programming model for modes used in Linux. This difference doesn't matter for Barebox, but the old mx31 compatible has been dropped from the DT, so we need to match on the one still present. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 26 Oct 2015 Sascha Hauer committed on 26 Oct 2015
2015-10-07	dd4da6d Browse files » Merge branch 'for-next/omap' Sascha Hauer committed on 7 Oct 2015
2015-10-07	181bb31 Browse files » Merge branch 'for-next/mtd' Sascha Hauer committed on 7 Oct 2015
2015-10-06	7bf2e89 Browse files » Merge branch 'for-next/mips' Sascha Hauer committed on 6 Oct 2015
	ddd7031 Browse files » Merge branch 'for-next/imx-ldb' Sascha Hauer committed on 6 Oct 2015
	160bd3b Browse files » Merge branch 'for-next/imx' Sascha Hauer committed on 6 Oct 2015
2015-10-02	f54c032 Browse files » xload: be more flexible when searching for second stage bootloader. ... A first stage bootloader can read fat and ext4 filesystems, and even both can be compiled-in at the same time. But then xload has a hardcoded fat filesystem mount option which renders ext4 unusable. This patch tries to mount it as ext4 if the fat attempt fails. Then, a typical use case of an ext4 formatted filesystem is it to be a standard linux filesystem, which contains boot-related files in /boot. So, when searching for the second stage bootloader, try /boot/barebox.bin after not finding it in /barebox.bin Signed-off-by: Vicente Bergas <vicencb@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Vicente Bergas authored on 1 Oct 2015 Sascha Hauer committed on 2 Oct 2015
2015-10-02	49a1eeb Browse files » at91sam9x5: fix ROM base address (bugfix for nand ECC)i ... The ROM base address in the 9x5 processors lives at 1M, not 4M, where SMD is, as defined later in the same file. The ROM includes some tables that are used to build error-correction data for NAND memory. By using the wrong address, we get wrong data and the result is undetected bit flips (data at 0x408000 is all zeroes). Thus, even though our kernel was fixing bit errors in NAND, barebox was not fixing them. With UBI (our situation) we got I/O errors because the checksum verification for data nodes failed. Using the proper address corrects the problem: barebox reports a "bitflip" message, consistent with the kernel message for the same file, and the files are properly loaded and booted. Note: the kernel has the same wrong define, but then the magic number 0x00108000 as spelled in arch/arm/boot/dts/at91sam9x5.dtsi is used instead of the symbolic name. Signed-off-by: Edoardo Scaglia <scaglia@amelchem.com> Signed-off-by: Federico Braghiroli <braghiroli@amelchem.com> Signed-off-by: Alessandro Rubini <rubini@gnudd.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Edoardo Scaglia authored on 1 Oct 2015 Sascha Hauer committed on 2 Oct 2015
2015-10-01	a55684a Browse files » ARM: i.MX: GuF Santaro: Fix panel support ... The backlight enable gpio is in both the ldb node and the panel node. Remove it from the ldb node where is was unused and fix the polarity in the panel node. Also make the panel compatible to simple-panel to let the driver match it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 1 Oct 2015
2015-10-01	6d39ac3 Browse files » ARM: i.MX: GuF Santaro: enable PWM ... The PWMs now have to be enabled to use them. Enable the backlight PWM. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 1 Oct 2015
2015-09-29	bdb26b1 Browse files » ARM: am33xx: Enable ethernet node on NET boot ... Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Wadim Egorov authored on 28 Sep 2015 Sascha Hauer committed on 29 Sep 2015
	7f89b68 Browse files » ARM: dts: am335x-phytec-phycore-som: Disable mac node. ... Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Wadim Egorov authored on 28 Sep 2015 Sascha Hauer committed on 29 Sep 2015
	46c1454 Browse files » eukrea-cpuimx25: update defconfig ... Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Eric Bénard authored on 25 Sep 2015 Sascha Hauer committed on 29 Sep 2015
	d7f19aa Browse files » eukrea-cpuimx25: enable dfu sequence conditionaly ... this can be useful on the evaluation board but we don't want the sequence to launch on custom board when there is not the switch button on gpio 82 Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Eric Bénard authored on 25 Sep 2015 Sascha Hauer committed on 29 Sep 2015
	a266d59 Browse files » eukrea-cpuimx25: setup usb through chipidea-imx driver ... OTG and HOST port are tested with a mass storage device. Signed-off-by: Florian Vallee <fvallee@eukrea.fr> Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Florian Vallee authored on 25 Sep 2015 Sascha Hauer committed on 29 Sep 2015
	4f04790 Browse files » imx25: register usb-misc by default ... Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Eric Bénard authored on 25 Sep 2015 Sascha Hauer committed on 29 Sep 2015
	6b3bf88 Browse files » eukrea-cpuimx25: fix boot ... we need to disable second SD chip select properly else the SDRAM size detection will detect it but there is no memory connected so the boot will fail Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Florian Vallee <fvallee@eukrea.fr> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Florian Vallee authored on 25 Sep 2015 Sascha Hauer committed on 29 Sep 2015
	08f991a Browse files » archosg9: add display ... Signed-off-by: Vicente Bergas <vicencb@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Vicente Bergas authored on 25 Sep 2015 Sascha Hauer committed on 29 Sep 2015
	0b7bfa5 Browse files » archosg9: Use defaultenv-2-menu ... Signed-off-by: Vicente Bergas <vicencb@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Vicente Bergas authored on 25 Sep 2015 Sascha Hauer committed on 29 Sep 2015
	1fe4abe Browse files » archosg9: re-generate defconfigs with "make savedefconfig" ... Signed-off-by: Vicente Bergas <vicencb@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Vicente Bergas authored on 25 Sep 2015 Sascha Hauer committed on 29 Sep 2015
2015-09-23	43399aa Browse files » MIPS: tplink-mr3020_defconfig: enable gpio & leds ... Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 22 Sep 2015 Sascha Hauer committed on 23 Sep 2015
	f25a09d Browse files » MIPS: dts: tplink-mr3020.dts: enable gpio & leds ... Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 22 Sep 2015 Sascha Hauer committed on 23 Sep 2015
	57ce131 Browse files » MIPS: dts: tplink-mr3020.dts: move aliases up ... Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 22 Sep 2015 Sascha Hauer committed on 23 Sep 2015
	de8a864 Browse files » MIPS: dts: ar9331.dtsi: add gpio ... Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 22 Sep 2015 Sascha Hauer committed on 23 Sep 2015
	15cc058 Browse files » gpio: add ath79-gpio driver for Atheros MIPS SoCs ... This driver is based on linux-4.2 driver. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 22 Sep 2015 Sascha Hauer committed on 23 Sep 2015
	e40e6e4 Browse files » MIPS: ath79: use gpiolib ... Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 22 Sep 2015 Sascha Hauer committed on 23 Sep 2015
	495f003 Browse files » MIPS: refactor SBL start.S code ... This commit removes code duplication by using MIPS PBL macros in the SBL start.S file. One of the side effects of this patch is that the only <asm/pbl_macros.h> header file is depends on the <generated/utsrelease.h> header file. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 20 Sep 2015 Sascha Hauer committed on 23 Sep 2015
2015-09-21	35a0f20 Browse files » MIPS: PBL: Add missing pieces for xz compressed PBL image ... Also ignore piggy.shipped binary (CONFIG_IMAGE_COMPRESSION_NONE=y). Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 20 Sep 2015 Sascha Hauer committed on 21 Sep 2015
	072a4af Browse files » MIPS: mach-ath79: make ar71xx_regs.h assembler-tolerant ... Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 20 Sep 2015 Sascha Hauer committed on 21 Sep 2015
	29986f9 Browse files » ARM: MMU: fixed calculation of number of PTEs ... barebox uses 4KiB pages so that number of PTEs is 'size >> 12', not 'size >> 10'. Thie 'size >> 10' limit is not an immediate problem because it allocates too much PTEs only which are not used. But it can overflow an integer multiplication ('i * PAGE_SIZE') which causes undefined behaviour with gcc5. Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Enrico Scholz authored on 17 Sep 2015 Sascha Hauer committed on 21 Sep 2015