wd: add stub for of_get_watchdog_priority ...

Allow drivers to build even if WD core isn't enabled.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

endian: Always evaluate arguments ...

This patch is based on

    commit 3d6f4a2
    Author: David Miller <davem@davemloft.net>
    Date:   Thu Jul 24 23:38:31 2008 -0700

        endian: Always evaluate arguments.

In barebox.git/drivers/usb/core/usb.c,
function usb_parse_config() we have had

    le16_to_cpus(&(dev->config.wTotalLength));

which evaluates to "do { } while (0)" on little endian,
so struct usb_configuration field misuse will never
be discovered on little endian.

Therefore, always evaluate the arguments to nop endian
transformation operations.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/restart'

Merge branch 'for-next/param'

Merge branch 'for-next/of_path'

Merge branch 'for-next/mtd'

Merge branch 'for-next/misc'

Merge branch 'for-next/login'

Merge branch 'for-next/gpio'

Merge branch 'for-next/fb-imx-ipu-v3'

cdev: Add function to find cdev by device_node ...

This adds a device_node member to struct cdev and a function
to find a cdev by device_node.
This also removes the setting of cdev->dev->device_node in
the of partition parser. We must not set the device since it
may not refer to a partition but to a whole device with partitions.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

spi: i.MX: optimize transfers for ECSPI v2.3 ...

Instead of writing one word to the txfifo and then wait until
one is received in the rxfifo we can write until the txfifos
are not full and read as long the rxfifos contain data. This
makes transfers for the m25p80 driver around 7 times faster
here.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

spi: i.MX: use start mode control bit ...

The i.MX SPI controller in version 2.3 can immediately start a transfer
when the txfifo is written to. In this mode we no longer have to trigger
the transfer with the xch bit which makes the code a bit simpler.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

watchdog: Fix static inline ops ...

...by actually making them static inline.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

login: cleanup password code ...

- make some locally used functions static
- remove read_passwd which is unused
- some refactoring to make code pathes clearer

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

login: rework login mechanism ...

We used to have the login functionality in the /env/bin/init script.
This is hard to review and it's too easy to break the login functionality
with changes to this script. Move the places to ask for a password to
C code where we have only a few places where we have to ask for a password.
Mainly these are run_shell() and the menutree command.

This patch introduces a login() function which will only return if the correct
password has been entered. Following calls will return immediately without
asking for a password again.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

reset-source: Allow different priorities ...

Different devices may report the reset source with different levels
of certainty. For example a SoC may see a power-on reset, but this
may only be because an external PMIC has power cycled the SoC. This
means the PMIC knows the real reason better and thus the reset reason
from the PMIC should be preferred.

This patch introduces priorities for the reset_source to handle the
above scenario. Also add a of_get_reset_source_priority() function
to retrieve the desired priority from the device tree.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

watchdog: Give watchdogs a name ...

This adds a dev and name member to struct watchdog which helps distinguishing
between different watchdogs. Also add some debugging aids.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

watchdog: Allow multiple watchdogs ...

Put watchdogs on a list to allow multiple watchdogs. Add a priority
field to be able to pick the highest priority watchdog.
This patch also provides a of_get_watchdog_priority() function to
allow configuring the watchdog priority from the device tree.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

restart: replace reset_cpu with registered restart handlers ...

This replaces the reset_cpu() function which every SoC or board must
provide with registered handlers. This makes it possible to have multiple
reset functions for boards which have multiple ways to reset the machine.
Also boards which have no way at all to reset the machine no longer
have to provide a dummy reset_cpu() function.

The problem this solves is that some machines have external PMICs or
similar to reset the system which have to be preferred over the
internal SoC reset, because the PMIC can reset not only the SoC but also
the external devices.

To pick the right way to reset a machine each handler has a priority. The
default priority is 100 and all currently existing restart handlers are
registered with this priority. of_get_restart_priority() allows to retrieve
the priority from the device tree which makes it possible for boards to
give certain restart handlers a higher priority in order to use this one
instead of the default one.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: m25p80: make it possible to use large blocks if desired ...

Some SPI NOR flashes support 4K erase blocks. 4K erase blocks do not
work with UBIFS which needs a minimum erase block size of 15360 bytes.
Also bigger sectors are faster to erase. This patch adds a device tree
option to use the bigger blocks instead of the default 4K blocks.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

param_enum: Make name strings const ...

Not only the array containing the pointers should be const but
also the strings themselves, so instead of using const char **
use const char * const *.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

gui: implement blitting screen areas ...

So far we only supported blitting the whole screen from the shadow
fb to the framebuffer. Add a function to blit areas.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

gui: Use fb provided shadowfb for offscreen rendering ...

The fb core now has builtin support for offscreen rendering, use
this and drop offscreen handling in the gui code.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fb: Add shadowfb support ...

For speeding up rendering we need shadow framebuffers. This is currently
implemented in the gui functions. This does not work properly when two
users (splash and fbconsole) use the same framebuffer since in this case
two different shadow framebuffers will be used. This patch implements
shadowfb handling in the fb core directly. With this the fb device gets
a parameter 'shadowfb'. When this is true the fb core will allocate a
shadow fb and provide it to the users.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

i2c: add bus recovery infrastructure ...

This is based on the code introduced to the kernel in
5f9296b.

Signed-off-by: Jan Luebbe <jluebbe@debian.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

gpio: Drop asm-generic/gpio.h ...

Since we no longer have custom gpio function prototypes we can
drop the prototypes from asm-generic/gpio.h can add them to
include/gpio.h instead. While at it add static inline dummy wrappers
for !CONFIG_GENERIC_GPIO so that code using gpios can compile without
gpio support.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

video: backlight: add fallbacks for client functions ...

Add empty static inline function fallbacks if backlight support
is not enabled, so that drivers using the backlight don't fail to
build.

Fixes:
In function `simple_panel_ioctl':
undefined reference to `of_backlight_find'
undefined reference to `backlight_set_brightness_default'
undefined reference to `backlight_set_brightness'

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

implement dma_alloc_writecombine ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/vpl'