ARM: Add support for semihosting ...

Add semihosting API implementation and implement a filesystem driver
to access debugging host filesystem using it.

Tested on Freescale SabreSD board (i.MX6Q) using OpenOCD

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fs: implement EFI variable filesystem driver ...

This implements a filesystem for accessing EFI variables.
It is compatible to the Linux Kernel efivarfs filesystem.
Currently the variables can only be accessed readonly.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fs: implement EFI filesystem driver ...

This implements a filesystem driver which uses the EFI Simple File
System Protocol to provide files from EFI to barebox.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

nfs: parse nfsport and mount port from file system options ...

This allows to use unfs3 on the server side which doesn't integrate into
portmap/rpcbind which results in the port not being impossible to lookup
via rpc calls to the portmap program.

Use it like:

	mount -t nfs -o port=2703,mountport=2703 192.168.77.157:/root /mnt/nfs

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/fs' ...

Conflicts:
	fs/Kconfig
	fs/Makefile

fs: add BPKFS support ...

Simple update file format developed for Somfy, tools and library are
available under LGPLv2 (https://www.gitorious.org/libbpk).

This format in the v1.0 allow you to store 6 types a binary stream for
a unique hardware id:
 - bootloader
 - bootloader_version
 - description.gz
 - kernel
 - rootfs
 - firmware_version

and you can easly add more binary stream type.

The fs will display you in a directory per hw id

and if a binary stream type is unknown will be display
as unknown_%08x

 # mount image.bpk /tmp
 # ls -l /tmp/hw_id_0/
-rwxrwxrwx         10 firmware_version
-rwxrwxrwx          8 firmware_version.crc
-rwxrwxrwx    1845968 kernel
-rwxrwxrwx          8 kernel.crc
-rwxrwxrwx    5062656 rootfs
-rwxrwxrwx          8 rootfs.crc
-rwxrwxrwx        248 bootloader
-rwxrwxrwx          8 bootloader.crc
-rwxrwxrwx     248925 description.gz
-rwxrwxrwx          8 description.gz.crc
-rwxrwxrwx          4 bootloader_version
-rwxrwxrwx          8 bootloader_version.crc
-rwxrwxrwx          4 unknown_1234567g
-rwxrwxrwx          8 unknown_1234567g.crc

Why BPK and not CPIO or uImage

1) CPIO

cpio does not handle > 4GiB image and does not have any crc checksum

2) uImage

uImage only provide one crc32 for the all data part and only a list of binary
stream with no information about what is what (in multi-image format)

3) BPK

BPK provide a crc32 for the header part and one crc32 per binary stream
so if you does not care of some data you are not force to check them

And you known exactly the binary stream type and for which hw to
use it.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Fargier Sylvain <sylvain.fargier@somfy.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fs: add uimagefs ...

this will provide the image data and information via file

 # ls -l /tmp/
-rwxrwxrwx          3 arch
-rwxrwxrwx         12 compression
-rwxrwxrwx         16 name
-rwxrwxrwx          5 os
-rwxrwxrwx         24 time
-rwxrwxrwx         12 type
-rwxrwxrwx         10 load_addr
-rwxrwxrwx         10 entry_point
-rwxrwxrwx    2199875 data0
-rwxrwxrwx    2199875 data
-rwxrwxrwx         10 data.crc

if it's multi image

 # ls -l /tmp-multi/
-rwxrwxrwx          3 arch
-rwxrwxrwx         12 compression
-rwxrwxrwx         16 name
-rwxrwxrwx          5 os
-rwxrwxrwx         24 time
-rwxrwxrwx         16 type
-rwxrwxrwx         10 load_addr
-rwxrwxrwx         10 entry_point
-rwxrwxrwx       1292 data0
-rwxrwxrwx        983 data1
-rwxrwxrwx       2287 data
-rwxrwxrwx         10 data.crc

you can get the image header via an ioctl on any file
UIMAGEFS_METADATA

if you want to check the crc do

 # crc32 -f /tmp-multi/data -V /tmp-multi/data.crc
CRC32 for /tmp-multi/data 0x00000000 ... 0x000008ee ==> 0x88d5a0db

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fs: Add ubifs support ...

This adds ubifs support from u-boot-2013.07. This is taken
mostly as-is, only the necessary adjustments to attach to the
barebox fs layer have been made.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fs: implement initial ext4 support from U-Boot ...

The ext4 implementation has been taken from U-Boot with some
changes:

- No global variables to allow for multiple filesystems to
  be mounted and multiple files to be open.
- remove fs internal link following and use the barebox link
  implementation.
- remove write support. This is incomplete in U-Boot, so I decided
  to skip this for now.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

omap4: add filesystem support over usb boot ...

Signed-off-by: Vicente <vicencb@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fs: Add NFS support ...

This patch adds readonly NFS support. Currently no links are supported.
This is based on the previous U-Boot/NetBSD based code and some Kernel
bits.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Add suport for tftp as a filesystem ...

This adds tftp filesystem support. It currently duplicates
significant amounts of the tftp (command) support. This is ok
since we can eventually drop the original tftp command later.

tftp is not really suitable to be handled as a filesystem. It lacks
support for stat, reading directories and other things. Handling
it as a filesystem has one big advantage though: tftp is no special
case for boot scripts and/or commands anymore which makes them simpler.

This implementation has some improvements to the original tftp command.
It supports blocksize negotiation which speeds up transfers if the tftp
server supports it. Also we can determine the filesize to transfer if
the remote end supports it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fs: add fat filesystem support ...

This code is based on:

http://elm-chan.org/fsw/ff/00index_e.html

FatFs Generic FAT File System Module

This patch offers a read/write implementation for barebox. The code
does not exaclty match barebox coding style, but works nicely and
should be ready to give it a try.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

devfs: factor out core devfs functionality ...

This makes it possible to compile without devfs. devfs_create/devfs_remove
is used by drivers and thus must still be present even without devfs support.
Also, this patch adds cdev_open/cdev_close/cdev_flush/cdev_ioctl calls to
work with devices without using the file api.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This is Kconfig cleanup patch (not all configurations will use CFI, SPI, RAMFS and DEVFS). ...

* Enable CFI and SPI drivers menuconfig option to be able to disable them in menuconfig.
* Introduce capability to disable ramfs and devfs.

svn_rev_465 ...

make fs support mandatory

svn_rev_339

svn_rev_284 ...

add devfs

svn_rev_252 ...

WIP

svn_rev_234 ...

beginning filesystem support

Add support for a saving build objects in a separate directory. ...

Modifications are based on the linux kernel approach and
support two use cases:

  1) Add O= to the make command line
  'make O=/tmp/build all'

  2) Set environement variable BUILD_DIR to point to the desired location
  'export BUILD_DIR=/tmp/build'
  'make'

The second approach can also be used with a MAKEALL script
'export BUILD_DIR=/tmp/build'
'./MAKEALL'

Command line 'O=' setting overrides BUILD_DIR environent variable.

When none of the above methods is used the local build is performed and
the object files are placed in the source directory.

ext2fs support added

* Patch by Pavel Bartusek, 21 Mar 2004 ...

Add Reiserfs support

* Patch by Hinko Kocevar, 20 Mar 2004
  - Add auto-release for SMSC LAN91c111 driver
  - Add save/restore of PTR and PNR regs as suggested in datasheet

* Patch by Robert Schwebel, 15 Dec 2003: ...

add support for cramfs (uses JFFS2 command interface)

* Code cleanup: ...

- remove trailing white space, trailing empty lines, C++ comments, etc.
  - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)

* Patches by Kenneth Johansson, 25 Jun 2003:
  - major rework of command structure
    (work done mostly by Michal Cendrowski and Joakim Kristiansen)

* Fix CONFIG_NET_MULTI support in include/net.h ...

* Patches by Kyle Harris, 13 Mar 2003:
  - Add FAT partition support
  - Add command support for FAT
  - Add command support for MMC
  ----
  - Add Intel PXA support for video
  - Add Intel PXA support for MMC
  ----
  - Enable MMC and FAT for lubbock board
  - Other misc changes for lubbock board

* Patch by Daniel Engström, 13 Nov 2002: ...

Add support for i386 architecture and AMD SC520 board

* Patch by Pierre Aubert, 12 Nov 2002:
  Add support for DOS filesystem and booting from DOS floppy disk

Initial revision