ARM: mx6sx-sabresdb: set proper hostname ...

Also move the initcall to the level matching the name of the
function.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: imx6dl: Add support for Phytec phyCORE-i.MX6 SOM ...

Add Phytec phyCORE-i.MX6 SOM.
     - imx6dl-phytec-phycore-som-nand
        - 256GB RAM on 1 Bank with 32Bit
        - 10/100MBit Ethernet
        - NAND
        - SD
        - UART

Signed-off-by: Stefan Christ <s.christ@phytec.de>
Signed-off-by: Christian Hemp <c.hemp@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: imx6q: Add support for Phytec phyCORE-i.MX6 SOM ...

Add Phytec phyCORE-i.MX6 SOM.
    Support:
     - imx6q-phytec-phycore-som-nand:
        - 1GB RAM on 1 Bank with 64Bit
        - 1GBit Ethernet
        - SPI NOR
        - NAND
        - SD
        - UART

     - imx6q-phytec-phycore-som-emmc
        - 1GB RAM on 1 Bank with 64Bit
        - 1GBit Ethernet
        - SPI NOR
        - eMMC
        - SD
        - UART

Signed-off-by: Christian Hemp <c.hemp@phytec.de>
Signed-off-by: Stefan Christ <s.christ@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: imx6q: pfla02: add phyFLEX-i.MX6 DualLite 1GiB on one bank ...

Add support for phyFLEX-i.MX6 DualLite 1GiB on one bank with NOR.

Signed-off-by: Stefan Christ <s.christ@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: imx6dl: pfla02: Add support for 128MB and 256MB RAM ...

Add support for phyFLEX-i.MX6 Solo with 128MB and 256MB RAM on one
memory bank.

Signed-off-by: Stefan Christ <s.christ@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: imx6q: pfla02: Add support for 512MiB RAM on one bank ...

Add support for phyFLEX-i.MX6 Quad 512MiB RAM on one bank.

Signed-off-by: Stefan Christ <s.christ@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: pfla02: append suffix 1bank ...

In the current naming schema the phyFLEX-i.MX6 variants which only use
one bank for memory have the suffix "1bank". The variants which use two
banks of memory have no suffix.

The patch fixes the name of the phyFLEX-i.MX6 Solo variant with 512MiB
on one bank. So the name of the image file changes from
    barebox-phytec-pbab01s-512mb.img
    barebox-phytec-phyboard-subra-512mb.img
to
    barebox-phytec-pbab01s-512mb-1bank.img
    barebox-phytec-phyboard-subra-512mb-1bank.img

This patch touches the phyFLEX-i.MX6 Kit variant and the
phyBOARD-SUBRA-i.MX6 which shares the same phyFLEX-i.MX6 module.

Signed-off-by: Stefan Christ <s.christ@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

boards: Add phytec-som-imx6 ...

The main idea behind this patch is to avoid redundant code.  Because of
the module similarities of all i.MX6 based phytec boards, we can merge
its code.

The phytec-som-imx6 merges the code of all i.MX6 based phytec SOMs.  So
we will have only one "board" in the barebox for phyCARD-i.MX6 and
phyFLEX-i.MX6.

Signed-off-by: Stefan Christ <s.christ@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: microsom: add full set of module variants on Hummingboard ...

Now that we have a full set of DRAM configuration entries we can
build images for the full set of modules on Hummingboard.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: microsom: import DCD from SolidRun U-Boot ...

This is a complete set of DRAM configuration values for all of the
MicroSOM variants extracted from SolidRun U-Boot.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: microsom: change barebox image name for Hummingboard ...

To reflect that the current image is in fact for a combination of a
MicroSOM i1 with a Hummingboard baseboard.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/mvebu'

Merge branch 'for-next/misc'

images: Embedsky E9: use image name like the rest of boards ...

Use name similar to other boards thus remove freescale from image
name since this is not a Freescale board, move SoC type after
company name.

So image name changed from barebox-freescale-imx6q-embedsky-e9.img to
barebox-embedsky-imx6q-e9.img

Signed-off-by: Anton Bondarenko <anton.bondarenko.sama@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Make list of flash images and fix link all single image cases ...

Create a new file named 'barebox-flash-images' in the top level output
directory that lists each image generated, one per line.  Paths will
be relative to the top level output directory.  This works if multiple
images are generated as well as for a single image.

Also update the existing barebox-flash-image symlink to point to the
image in all cases where there is a single image generated.  If
multiple images are generated, it will point to the non-existent file
'multi-image-build'.

Signed-off-by: Trent Piepho <tpiepho@kymetacorp.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX6: add Technexion Wandboard support ...

This adds support support for the i.MX6 Technexion Wandboard. The
board comes in different SoC variants and different amounts of RAM.
The baord type is autodetected based on the SoC type, so all boards
can be supported by the same binary image.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: mvebu: Lenovo IX4 300D: Fix pblb generation ...

pblx-y must be passed the entry point function without any extension.
Otherwise the pblb file is not added to $targets and is removed by
make as an intermediate file.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

images: ignore *.imx-sram-img ...

Add pattern to gitignore to hide files:

    start_imx6_cm_fx6.imx-sram-img
    start_imx6_utilite.imx-sram-img

Signed-off-by: Stefan Christ <s.christ@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/vincell'

Merge branch 'for-next/imx'

ARM: initial cm-fx6 support ...

The cm-fx6 board is a module from Compulab with different i.MX6 SoCs.
This module is also found in the Utilite Mini Computer this patch
also adds support for.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: dts: Add support for all phyFLEX-AM335x options ...

Add support for all possible combinations of phyFLEX-AM335x modules.

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: dts: Add support for all phyCORE-AM335x options ...

Add support for all possible combinations of phyCORE-AM335x
modules.

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: phytec-som-am335x: Add support for 1024MiB RAM on one chip ...

Added support for IM8G16D3FBBG15EI 1024MiB RAM on one chip.

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

images: i.MX: Create target for SRAM images ...

Some boards like to do their SDRAM setup in code rather than in hardcoded
DCD tables. For these boards the bootloader has to be loaded to the internal
SRAM which is often too small for a full featured barebox. This new SRAM
image type target allows to overcome this limitation. The image created
with the new imx-sram-img rule is a regular imx-image with the difference
that the load size only spans the pblx image and not the whole image including
the payload. The pbl image easily fits into SRAM. The strategy is that this
initial code initializes the SDRAM, loads the whole image to SDRAM and jumps
to it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: vincell: move to DT probing ...

This enabled multi image support for the Garz&Fricke Vincell board. Also
it adds the Vincell-LT as a second image with a separate device tree.
Previously we used the same image on both the Vincell and the Vincell-LT
image since the differences are not that significant for barebox. Still
this was good for quite some confusion internally, so let's properly
introduce a second image.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/omap' ...

Conflicts:
	arch/arm/boards/beagle/board.c

Merge branch 'for-next/misc'

ARM: beagleboard: Move to multiimage support ...

Breathe some life back into the beagleboard:

- switch to multiimage support
- update config
- initialize early UART for debugging

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

images: Add file size check for PBLX files ...

Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>