2016-01-26 |
bootm: make verifying/hashing configurable
...
So long struct bootm_data.verify is a bool which enables CRC checking
(hashing). Extend this to a enum and add support for signature checking
in the same option. This also adds the corresponding globalvar and a
-s option to bootm.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
committed
on 26 Jan 2016
|
bootm: Initialize bootm_data defaults in single place
...
Both the bootm and the boot code initialize the struct bootm_data
with defaults from the bootm global variables. Create a common
function for doing this.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
committed
on 26 Jan 2016
|
bootm: Push dryrun to handlers
...
We can make the dryrun option more useful by calling into the handlers.
With this we can detect more cases that can go wrong during boot.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
committed
on 26 Jan 2016
|
2015-05-26 |
bootm: add magicvar description for global.bootm.oftree
...
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Marc Kleine-Budde
authored
on 23 May 2015
Sascha Hauer
committed
on 26 May 2015
|
2014-07-07 |
bootm.c: "-o" option should refer to "DTB", not "DTS"
...
Fix option explanation, and a couple grammar fixes.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Robert P. J. Day
authored
on 4 Jul 2014
Sascha Hauer
committed
on 7 Jul 2014
|
2014-06-26 |
Documentation: remove doxygen documentation
...
The doxygen documentation is long outdated. Remove it. It will
be replaced with sphinx based documentation later.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
committed
on 26 Jun 2014
|
2014-06-02 |
bootm: beautify output
...
* fix indentation of options in 'help bootm'
* add missing help for -m
* put some output into debug/verbose mode
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Holger Schurig
authored
on 30 May 2014
Sascha Hauer
committed
on 2 Jun 2014
|
2014-05-14 |
commands: harmonize in-barebox documentation
...
This patch does probably too much, but it's hard (and very
cumbersome/time consuming) to break it out. What is does is this:
* each command has one short description, e.g. "list MUX configuration"
* made sure the short descriptions start lowercase
* each command has one usage. That string contains just the
options, e.g. "[-npn]". It's not part of the long help text.
* that is, it doesn't say "[OPTIONS]" anymore, every usable option
is listed by character in this (short) option string (the long
description is in the long help text, as before)
* help texts have been reworked, to make them
- sometimes smaller
- sometimes describe the options better
- more often present themselves in a nicer format
* all long help texts are now created with BUSYBOX_CMD_HELP_
macros, no more 'static const __maybe_unused char cmd_foobar_help[]'
* made sure the long help texts starts uppercase
* because cmdtp->name and cmdtp->opts together provide the new usage,
all "Usage: foobar" texts have been removed from the long help texts
* BUSYBOX_CMD_HELP_TEXT() provides the trailing newline by itself, this
is nicer in the source code
* BUSYBOX_CMD_HELP_OPT() provides the trailing newline by itself
* made sure no line gets longer than 77 characters
* delibertely renamed cmdtp->usage, so that we can get compile-time
errors (e.g. in out-of-tree modules that use register_command()
* the 'help' command can now always emit the usage, even without
compiled long help texts
* 'help -v' gives a list of commands with their short description, this
is similar like the old "help" command before my patchset
* 'help -a' gives out help of all commands
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Holger Schurig
authored
on 13 May 2014
Sascha Hauer
committed
on 14 May 2014
|
commands: group 'help' output
...
The old output of "help" was just producing a long list, that usually
scrolled of the screen (even on a X11 terminal). This list is more
compact, and also sorted by groups.
The old output format (plus grouping) is now available with 'help -v'.
Example:
Information commands:
?, devinfo, help, iomem, meminfo, version
Boot commands:
boot, bootm, go, loadb, loads, loadx, loady, saves, uimage
...
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Holger Schurig
authored
on 13 May 2014
Sascha Hauer
committed
on 14 May 2014
|
2013-10-07 |
bootm: Replace getenv_loadaddr with getenv_ul
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
committed
on 7 Oct 2013
|
2013-09-24 |
bootm: Add dryrun support
...
This adds support for checking the bootm command without actually booting.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
committed
on 24 Sep 2013
|
bootm: separate bootm input data and internal data
...
We used to use struct image_data as the central data structure for bootm and
also as the input data structure. This makes it unclear which of the fields
are actually input data. This patch creates a struct bootm_data which is
exclusively used for input data to make usage clearer.
Also it moves the dispatching of multifile uImage pathnames to the core bootm
code so that the core code gets more flexible and the command code simpler.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
committed
on 24 Sep 2013
|
bootm: move globalvars from command to common
...
The globalvars should be available even if the bootm command
is not directly present.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
committed
on 24 Sep 2013
|
bootm: move getenv_loadaddr from command to common
...
getenv_loadaddr may be used by other code, so move it
from command/ to common/
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
committed
on 24 Sep 2013
|
bootm: remove unused define
...
OFTREE_SIZE_INCREASE isn't used anymore.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
committed
on 24 Sep 2013
|
2013-09-05 |
Merge branch 'for-next/boardinfo'
...
Conflicts:
arch/mips/boards/qemu-malta/init.c
commands/bootm.c
drivers/of/base.c
Sascha Hauer
committed
on 5 Sep 2013
|
2013-09-02 |
bootm: add global bootm.{image/initrd}.loadaddr support
...
To be able to pass the loadaddr of the image and the initrd.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Jean-Christophe PLAGNIOL-VILLARD
authored
on 1 Sep 2013
Sascha Hauer
committed
on 2 Sep 2013
|
2013-08-16 |
globalvar: Allow to set initial value
...
Calling globalvar_add_simple() and setting a value is more than common.
Add a parameter for the initial value.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
committed
on 16 Aug 2013
|
2013-06-19 |
bootm: factor out code to make it usable from C
...
Much of the bootm code is implemented in the command itself. Move
it to a common place to be able to call it from C aswell.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
committed
on 19 Jun 2013
|
2013-05-31 |
bootm: Print internal devicetree information without verbose
...
It's a precious information that barebox will boot the kernel
with the internal devicetree, so print it even in non verbose
mode.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
committed
on 31 May 2013
|
bootm: make sure to print fixed oftree
...
when doing bootm -v -v we dumped the original tree to the console.
Make sure to print the fixed tree instead so that the fixups can
be examined.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
committed
on 31 May 2013
|
2013-05-04 |
Don't honor initrd load address
...
U-Boot doesn't honor the load address specified in an initrd. Barebox
shouldn't be more strict here. This unbreaks booting an uInitrd
generated by Debian's flash-kernel that uses 0 as entry address where
there is nothing on the i.MX53 that was used.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
committed
on 4 May 2013
|
bootm: Simplify initrd address handling
...
data.initrd_address = UIMAGE_SOME_ADDRESS;
...
if (-L was given to bootm)
data.initrd_address = address_provided_to_-L;
...
if (initrd is provided as uInitrd && data.initrd_address == UIMAGE_SOME_ADDRESS)
data.initrd_address = load_address_from_uInitrd;
...
if (data.initrd_address == UIMAGE_SOME_ADDRESS)
data.initrd_address = UIMAGE_INVALID_ADDRESS;
can be simplified to:
data.initrd_address = UIMAGE_INVALID_ADDRESS;
...
if (-L was given to bootm)
data.initrd_address = address_provided_to_-L;
...
if (initrd is provided as uInitrd && data.initrd_address == UIMAGE_INVALID_ADDRESS)
data.initrd_address = load_address_from_uInitrd;
...
The only change introduced by this simplification is for cases where the
user passes -L UIMAGE_SOME_ADDRESS or -L UIMAGE_INVALID_ADDRESS to
bootm. (-L UIMAGE_SOME_ADDRESS is now used literally instead of ignored
before. -L UIMAGE_INVALID_ADDRESS used to skip getting the
initrd-address from the uInitrd, now the uInitrd address is honored.)
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Uwe Kleine-König
authored
on 2 May 2013
Sascha Hauer
committed
on 4 May 2013
|
2013-03-06 |
of: remove unused libfdt
...
Now that we are completely independent of libfdt remove the unused
code.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
committed
on 6 Mar 2013
|
bootm: Pass unflattened devicetree to handlers
...
This makes it possible to modify the tree in the handlers.
This is necessary because the initrd addresses are only
known inside the handlers, but not to the generic bootm
code.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
committed
on 6 Mar 2013
|
bootm: Use of_print_nodes instead of fdt_print
...
Now that we use the unflattened tree in bootm we can use of_print_nodes
instead of printing the flattened tree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
committed
on 6 Mar 2013
|
of: Pass barebox internal format devicetree to of_get_fixed_tree
...
With this every devicetree is first converted to the barebox internal
format before it's converted back to dtb again.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
committed
on 6 Mar 2013
|
2013-02-04 |
Merge branch 'for-next/oftree'
...
Conflicts:
drivers/of/base.c
Sascha Hauer
committed
on 4 Feb 2013
|
2013-01-18 |
bootm: move printing of file locations outside verbose mode
...
The location of files that are booted is a precious information, so print
it by default and not only in verbose mode.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Michael Olbrich <m.olbrich@pengutronix.de>
Sascha Hauer
committed
on 18 Jan 2013
|
2013-01-11 |
of: make of_get_fixed_tree more universally usable
...
Currently the bootm code uses of_fix_tree to apply the fixups
to the devicetree given on the command line. This function assumes
that there is enough space for the fixups available. Also on ARM
we have to make sure the tree does not cross 1Mib boundaries.
This patch moves the space allocation and alignment ensurance
to of_get_fixed_tree and uses it in bootm. This is the first
step for making of_get_fixed_tree the single point of devicetree
handling in barebox.
of_get_fixed_tree now takes an argument of the input fdt. If it is
given, this one is used, otherwise an internal oftree is used which
will be created in subsequent patches.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
committed
on 11 Jan 2013
|