fs: move PAGE_CACHE definitions to include/linux/pagemap.h ...

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fs: introduce include/linux/fs.h ...

Move Linux file system structs from UBIFS to central place.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fs: move struct timespec to include/linux/time.h ...

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

bootm: add initial FIT support ...

This implementation is inspired by U-Boot's FIT support. Instead of
using libfdt (which does not exist in barebox), configuration signatures
are verified by using a simplified DT parser based on barebox's own
code.

Currently, only signed configurations with hashed images are supported,
as the other variants are less useful for verified boot. Compatible FIT
images can be created using U-Boot's mkimage tool.

Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

bootm: make verifying/hashing configurable ...

So long struct bootm_data.verify is a bool which enables CRC checking
(hashing). Extend this to a enum and add support for signature checking
in the same option. This also adds the corresponding globalvar and a
-s option to bootm.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

crypto: add RSA support ...

Taken from U-Boot and adopted to barebox with little changes.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

crypto: add digest_alloc_by_algo() ...

In barebox the function digest_alloc() allocates a digest based on a string.
When a subsystem already uses an integer value to identify a digest it makes no
sense to create a string and pass it to digest_alloc(), where it is parsed
again. This patch adds the possibility to get a digest by an enum.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

bootm: Initialize bootm_data defaults in single place ...

Both the bootm and the boot code initialize the struct bootm_data
with defaults from the bootm global variables. Create a common
function for doing this.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

bootm: move initrd code together ...

The initrd code is distributed in several places in the bootm code.
Move it all together in bootm_load_initrd().

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

bootm: use names instead of numbers for image parts ...

The uImage format uses numbers for to identify the different
parts of a image, but the FIT image format uses names. To better
integrate the FIT image format into bootm always use names and
convert them to numbers when necessary.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

bootm: introduce bootm_get_os_size ...

ARM do_bootm_linux is not only called with uImages but also with
raw images, so we can't use uimage_get_size() here. Introduce
bootm_get_os_size() which handles the different image types.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

barebox remote control ...

This adds the ability to control barebox over serial lines. The regular
console is designed for human input and is unsuitable for controlling
barebox from scripts since characters can be lost on both ends, the data
stream contains escape sequences and the prompt cannot be easily matched
upon.
This approach is based on the RATP protocol. RATP packages start with a
binary 0x01 which does not occur in normal console data. Whenever a
0x01 character is detected in the console barebox goes into RATP mode.
The RATP packets contain a simple structure with a command/respone
type and data for that type. Currently defined types are:

BB_RATP_TYPE_COMMAND (host->barebox):
	Execute a command in the shell
BB_RATP_TYPE_COMMAND_RETURN (barebox->host)
	Sends return value of the command back to the host, also means
	barebox is ready for the next command
BB_RATP_TYPE_CONSOLEMSG (barebox->host)
	Console message from barebox

Planned but not yet implemented are:

BB_RATP_TYPE_PING (host->barebox)
BB_RATP_TYPE_PONG (barebox->host)
	For testing purposes
BB_RATP_TYPE_GETENV (host->barebox)
BB_RATP_TYPE_GETENV_RETURN (barebox->host)
	Get values of environment variables

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Andrey Smirnov <andrew.smirnov@gmail.com>

Add Reliable Asynchronous Transfer Protocol ...

This patch adds support for Reliable Asynchronous Transfer Protocol (RATP)
as described in RFC916.

Communication over RS232 is often unreliable as characters are lost or
misinterpreted. This protocol allows for a reliable packet based communication
over serial lines.

The implementation simply follows the state machine described in the RFC
text with one exception. RFC916 uses a plain checksum for the
transferred data. We decided to use CRC16 for greater robustness. Since
this is the only RFC916 implementation we currently know of interoperability
with other implementations should not matter.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Andrey Smirnov <andrew.smirnov@gmail.com>

Convert users of PRINTF_CONVERSION_RESOURCE to %pa ...

printf now supports printing resource_size_t directly, convert
all users of the previously used PRINTF_CONVERSION_RESOURCE over
to %pa.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

input: Add device tree parsing support for matrix keymap ...

Add support for parsing the "linux,keymap" property.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

input: move matrix_keypad_build_keymap() to C file ...

Future additions will make the function too big to live as a static
inline function. Move to a C file and while at it, move matrix_keypad.h
to include/input/ where it belongs to.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

input: Add input core ...

Currently all input driver register themselves as consoles. Consoles are
fine for typing text, but they do not allow to ask for the current
pressed state of buttons or keypads. They also do not support non
printable keys like the function keys.

This patch adds a simple input core. On the driver side it supports
input_report_key_event() to report events (button presses and releases).
On the consumer side it allows getting the current button status via
input_key_get_status(). Also an event driven interface is available
which calls a callback whenever an input event is received.
The input core also registers a console for all registered input
devices which handles passing events to the console and stuff like key
repetition, so this can be removed from the drivers once they are
converted to the input core.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

keymap: Add keymap for keys with shift pressed ...

When converting keys to ascii for the console we also need the
keymap with shift pressed.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

poller: Fix async poller ...

The async poller does not work as expected since it can happen that
the async poller is removed from the list of pollers while we are
iterating over the list. Even list_for_each_entry_safe does not help
here since we may remove the next list element, but
list_for_each_entry_safe only allows to remove the current list element.

Rework the async poller so that it is registered with the poller
framework on registration and then is only marked as active with
poller_call_async(). This way we do not have to do list manipulations
while running the pollers.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/rtc'

Merge branch 'for-next/pstore'

Merge branch 'for-next/net'

Merge branch 'for-next/mtd'

Merge branch 'for-next/misc'

Merge branch 'for-next/gcc5'

of: Add of_property_for_each_phandle() iterator ...

This is like of_property_for_each_{string,u32} but loops over a list
of phandles instead of strings or ints.

Returns the node the handle points to as that's generally more useful
than the handle value itself.

Signed-off-by: Trent Piepho <tpiepho@kymetacorp.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: Add for_each_compatible_node_from iterator ...

The existing iterator for_each_compatible_node() searches for each
compatible node starting from the root of the loaded device tree.
This means it only works on the barebox device tree and not the tree
to be passed to the Linux kernel, which is what an of_fixup would
probably want to use.

This adds for_each_compatible_node_from(), which takes an additional
parameter of a root to search from.  This could be the device tree to
be used for the kernel.  It could also be used to search just a
subtree.

Signed-off-by: Trent Piepho <tpiepho@kymetacorp.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

devfs: Add symlink support ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

bootstrap: constify strings ...

Various parameters for device names, etc.  should be const strings.

Signed-off-by: Trent Piepho <tpiepho@kymetacorp.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

led: add missing includes ...

The led header use some parts which are missing when include the this
header. This patch adds them.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>