efi: let the generic relocate code handle all relocations ...

Part of the barebox code and variables are put in separate sections
(.barebox* and .initcall*). When this code is compiled as position
independent code then the compiler creates corresponding .rela.barebox* and
.rela.initcall* sections with the relocation table entries.
These sections don't match the .rela.data* wildcard in the linker script.
As a result, they are not added to the .rela section during linking but are
added individually after it instead. And when the EFI binary is created
from the ELF binary, these sections are not copied.
This has two side effects:

1. The corresponding relocations are not handled by the generic relocation
code. 'fixup_tables()' was added to do these relocations manually.

2. In the DYNAMIC section, the RELASZ entry contains the total size of
relocations in bytes. This includes the .rela.barebox* and .rela.initcall*
sections. This value is not modified when the EFI binary is created. So the
value is too large.
The generic relocation code in _relocate() used this value when iterating
over all relocation entries. With the wrong RELASZ value it iterates beyond
the end of the .rela section into uninitialized memory. After power-on this
memory is zero and the relocation code interprets this as 'nothing to do',
so there is no visible effect. After a soft reset, random data in that area
may produce a seemingly valid relocation entry, a random address is
modified and barebox crashes.

This patch adds the .rela.barebox* and .rela.initcall* sections to the
normal .rela section. The RELASZ now contains the correct size and the
generic relocation code works correctly. 'fixup_tables()' must be removed
at the same time to avoid relocating these entries twice.

Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX27: Fix gpt compatible for latest device trees ...

In v4.2-rc3 the "fsl,imx1-gpt" compatible was replaced with
"fsl,imx21-gpt" so i.MX27 currently ends up without clocksource. Fix
this.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/misc'

Merge branch 'for-next/mips'

Merge branch 'for-next/imx'

Merge branch 'for-next/driver'

Merge branch 'for-next/caam'

Merge branch 'for-next/arm'

Merge branch 'for-next/am335x'

MIPS: tplink-mr3020: fix "WPS" and "3G" LEDs ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: black-swift_defconfig: enable gpio-related stuff ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: black-swift: enable GPIO key ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: black-swift: enable GPIO LED ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: ath79: pbl: add pbl_ar9331_mdio_gpio_enable macro ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: black-swift_defconfig: use cached memory region ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: tplink-mr3020_defconfig: use cached memory region ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: dtb: register only one memory bank ...

Signed-off-by: Peter Mamonov <pmamonov@gmail.com>
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: implement dma_sync_* functions ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Peter Mamonov <pmamonov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: flush cache on shutdown ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Peter Mamonov <pmamonov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: add initial R4000-style cache support ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Peter Mamonov <pmamonov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: tplink-mr3020: pbl: init cache ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: black-swift: pbl: init cache ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: pbl: import cache init code from U-Boot v2016.01-212-ga3ab2ae ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: probe_scache(): use MIPS_CONF_M linux kernel macro ...

We already have MIPS_CONF_M macro in <asm/mipsregs.h> so
we have no need in homebrew CONFIG_M macro.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Cc: Peter Mamonov <pmamonov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX: karo-tx6: add pr_fmt ...

Add pr_fmt to print tx6 specific messages with a proper prefix.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX: karo-tx6: disable power button ...

The power button is not part of the CPU module and can be triggered
wrongly on other baseboards. Disable it since we do not need it
currently.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX: karo-tx6: Setup other PMICs ...

The TX6 boards come with 3 different PMIC variants from which we
currently only support the ltc3673. Detect the other two by i2c
address and set them up correctly. The code is based on the karo
U-Boot port.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

driver: replace dev_request_mem_region with dev_request_mem_resource ...

dev_request_mem_region doesn't work properly one some SoCs on which
PTR_ERR() values clash with valid return values from dev_request_mem_region.
Replace them with dev_request_mem_resource where possible.

This patch has been generated with the following semantic patch:

// <smpl>
@@
expression d;
expression n;
expression io;
identifier func;
@@
func(...) {
+struct resource *iores;
<+...
-io = dev_request_mem_region(d, n);
-if (IS_ERR(io)) {
+iores = dev_request_mem_resource(d, n);
+if (IS_ERR(iores)) {
...
-	return PTR_ERR(io);
-}
+	return PTR_ERR(iores);
+}
+io = IOMEM(iores->start);
...+>
}

@@
expression d;
expression n;
expression io;
identifier func;
@@
func(...) {
+struct resource *iores;
<+...
-io = dev_request_mem_region(d, n);
-if (IS_ERR(io)) {
+iores = dev_request_mem_resource(d, n);
+if (IS_ERR(iores))
-	return PTR_ERR(io);
-}
+	return PTR_ERR(iores);
+io = IOMEM(iores->start);
...+>
}

@@
expression d;
expression n;
expression io;
identifier func;
@@
func(...) {
+struct resource *iores;
<+...
-io = dev_request_mem_region(d, n);
-if (IS_ERR(io)) {
-	ret = PTR_ERR(io);
+iores = dev_request_mem_resource(d, n);
+if (IS_ERR(iores)) {
+	ret = PTR_ERR(iores);
...
}
+io = IOMEM(iores->start);
...+>
}

@@
expression d;
expression n;
expression io;
identifier func;
@@
func(...) {
+struct resource *iores;
<+...
-io = dev_request_mem_region(d, n);
+iores = dev_request_mem_resource(d, n);
+if (IS_ERR(iores))
+	return PTR_ERR(iores);
+io = IOMEM(iores->start);
...+>
}

@@
identifier func;
@@
func(...) {
<+...
struct resource *iores;
-struct resource *iores;
...+>
}
// </smpl>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arm/cpu/lowlevel: fix: possible processor mode change ...

This is a re-application of fix 17644b55.
arm_cpu_lowlevel_init() will set the processor mode to 0x13 (supervisor).
When this function is entered via a different processor mode, register
banking will happen to lr (r14), resulting in an invalid return address.
This fix will preserve the return address manually.

Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

efi: fix memory leak in error path ...

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>