Merge branch 'for-next/imx'

Merge branch 'for-next/arm'

ARM: i.MX: karo-tx6: Add support for the i.MX6q 1GiB variant ...

The i.MX6q variant is basically the same as the i.MX6dl variant, just
with another SoC and the usual i.MX6q/i.MX6dl adjustments.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: socfpga: socdk: Fix typo in Makefile ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Terasic DE0-Nano-SoC: add support ...

v7: eof whitespace fixes

A Patch for supporting the Terasic DE0 NANO-SoC with barebox.
The pretty similar Socrates Board was taken as a starting point with pulling
in the memory timings/pinmux from
http://rocketboards.org/foswiki/view/Documentation/AtlasSoCCompileHardwareDesign

Signed-off-by: Tim Sander <tim@krieglstein.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: boards: phytec-som-am335x: New RAM Timings for phyCORE-AM335x-R2 ...

Add RAM timings for phyCORE-AM335x-R2 256MB RAM.

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: board: phytec-som-am335x: RAM timings for phyCORE-AM335x-R2 ...

Add RAM Timings for new phyCORE-AM335x-R2 SoM with
512MB (MT41K256M16TW107IT).

Signed-off-by: Arnd Beuscher <a.beuscher@phytec.de>
Sigend-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/hab'

images: imx: Add targets for signed images and signed usb images ...

Add .simximg target for signed images and .usimximg for signed
images suitable for USB upload

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Make: i.MX: Allow to pass config file to cmd_imx_image ...

Pass the config file to cmd_imx_image as arguments to make it more
flexible. Also add the possibility for another arg containing additional
options.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

scripts: imx: Generate signed images with imx-image ...

The imx-image tool can now generate signed images itself, so we can
switch to this mechanism:

- Move the CSF templates to header files which can be included by the
  flash config files
- remove images/Makefile.imxhabv4 which is no longer necessary.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Add initial support for Netgear ReadyNAS 104 ...

Currently only second stage booting from the vendor U-Boot is tested. I
don't want to flash barebox into NAND yet because UART-booting for
recovery doesn't work for me.

Working so far are:

 - UART
 - networking
 - nand flash

Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: mx6sx-sabresdb: set proper hostname ...

Also move the initcall to the level matching the name of the
function.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: imx6dl: Add support for Phytec phyCORE-i.MX6 SOM ...

Add Phytec phyCORE-i.MX6 SOM.
     - imx6dl-phytec-phycore-som-nand
        - 256GB RAM on 1 Bank with 32Bit
        - 10/100MBit Ethernet
        - NAND
        - SD
        - UART

Signed-off-by: Stefan Christ <s.christ@phytec.de>
Signed-off-by: Christian Hemp <c.hemp@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: imx6q: Add support for Phytec phyCORE-i.MX6 SOM ...

Add Phytec phyCORE-i.MX6 SOM.
    Support:
     - imx6q-phytec-phycore-som-nand:
        - 1GB RAM on 1 Bank with 64Bit
        - 1GBit Ethernet
        - SPI NOR
        - NAND
        - SD
        - UART

     - imx6q-phytec-phycore-som-emmc
        - 1GB RAM on 1 Bank with 64Bit
        - 1GBit Ethernet
        - SPI NOR
        - eMMC
        - SD
        - UART

Signed-off-by: Christian Hemp <c.hemp@phytec.de>
Signed-off-by: Stefan Christ <s.christ@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: imx6q: pfla02: add phyFLEX-i.MX6 DualLite 1GiB on one bank ...

Add support for phyFLEX-i.MX6 DualLite 1GiB on one bank with NOR.

Signed-off-by: Stefan Christ <s.christ@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: imx6dl: pfla02: Add support for 128MB and 256MB RAM ...

Add support for phyFLEX-i.MX6 Solo with 128MB and 256MB RAM on one
memory bank.

Signed-off-by: Stefan Christ <s.christ@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: imx6q: pfla02: Add support for 512MiB RAM on one bank ...

Add support for phyFLEX-i.MX6 Quad 512MiB RAM on one bank.

Signed-off-by: Stefan Christ <s.christ@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: pfla02: append suffix 1bank ...

In the current naming schema the phyFLEX-i.MX6 variants which only use
one bank for memory have the suffix "1bank". The variants which use two
banks of memory have no suffix.

The patch fixes the name of the phyFLEX-i.MX6 Solo variant with 512MiB
on one bank. So the name of the image file changes from
    barebox-phytec-pbab01s-512mb.img
    barebox-phytec-phyboard-subra-512mb.img
to
    barebox-phytec-pbab01s-512mb-1bank.img
    barebox-phytec-phyboard-subra-512mb-1bank.img

This patch touches the phyFLEX-i.MX6 Kit variant and the
phyBOARD-SUBRA-i.MX6 which shares the same phyFLEX-i.MX6 module.

Signed-off-by: Stefan Christ <s.christ@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

boards: Add phytec-som-imx6 ...

The main idea behind this patch is to avoid redundant code.  Because of
the module similarities of all i.MX6 based phytec boards, we can merge
its code.

The phytec-som-imx6 merges the code of all i.MX6 based phytec SOMs.  So
we will have only one "board" in the barebox for phyCARD-i.MX6 and
phyFLEX-i.MX6.

Signed-off-by: Stefan Christ <s.christ@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: microsom: add full set of module variants on Hummingboard ...

Now that we have a full set of DRAM configuration entries we can
build images for the full set of modules on Hummingboard.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: microsom: import DCD from SolidRun U-Boot ...

This is a complete set of DRAM configuration values for all of the
MicroSOM variants extracted from SolidRun U-Boot.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: microsom: change barebox image name for Hummingboard ...

To reflect that the current image is in fact for a combination of a
MicroSOM i1 with a Hummingboard baseboard.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/mvebu'

Merge branch 'for-next/misc'

images: Embedsky E9: use image name like the rest of boards ...

Use name similar to other boards thus remove freescale from image
name since this is not a Freescale board, move SoC type after
company name.

So image name changed from barebox-freescale-imx6q-embedsky-e9.img to
barebox-embedsky-imx6q-e9.img

Signed-off-by: Anton Bondarenko <anton.bondarenko.sama@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Make list of flash images and fix link all single image cases ...

Create a new file named 'barebox-flash-images' in the top level output
directory that lists each image generated, one per line.  Paths will
be relative to the top level output directory.  This works if multiple
images are generated as well as for a single image.

Also update the existing barebox-flash-image symlink to point to the
image in all cases where there is a single image generated.  If
multiple images are generated, it will point to the non-existent file
'multi-image-build'.

Signed-off-by: Trent Piepho <tpiepho@kymetacorp.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX6: add Technexion Wandboard support ...

This adds support support for the i.MX6 Technexion Wandboard. The
board comes in different SoC variants and different amounts of RAM.
The baord type is autodetected based on the SoC type, so all boards
can be supported by the same binary image.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: mvebu: Lenovo IX4 300D: Fix pblb generation ...

pblx-y must be passed the entry point function without any extension.
Otherwise the pblb file is not added to $targets and is removed by
make as an intermediate file.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

images: ignore *.imx-sram-img ...

Add pattern to gitignore to hide files:

    start_imx6_cm_fx6.imx-sram-img
    start_imx6_utilite.imx-sram-img

Signed-off-by: Stefan Christ <s.christ@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>