Merge branch 'for-next/squashfs'

Merge branch 'for-next/mtd'

Merge branch 'for-next/misc'

Merge branch 'for-next/driver'

Merge branch 'for-next/caam'

Merge branch 'for-next/bbu'

fastboot: Add a ARM Barebox filetype handler ...

This will automatically call barebox_update for the transfered file if
it is an ARM Barebox image and the destination file is defined by some
update handler.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: mtd_[read|write|erase]: check for valid input data ...

mtd_[read|write|erase] are input functions to the mtd subsystem, so
check for valid input data here rather than relying on the drivers doing
this. The checks are copied from the Kernel as of 4.5-rc5

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

linux/fs.h: add types and routines needed for SquashFS ...

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

linux/types.h: add sector_t and blkcnt_t types ...

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

common: oftree: Add function to register set status fixup ...

Added a function to register a fixup to enable or disable
device tree nodes.

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

serial: imx: Support DTE mode ...

Based on Kernel commit 20ff2fe60a: serial: imx: add support for DTE mode

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

EP93xx eth: allow passing of phy config via platform data ...

Passing phy configuration to the ep93xx_eth driver was not supported yet
and will be added with this patch. When no pdata is passed, the probably
broken default of phy_addr = 0 will be used to maintain compatibility
with the previous implementation.

Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

driver: Introduce dev_request_mem_resource ...

dev_request_mem_region returns a void * which shall be checked with
IS_ERR(), but in some cases the valid pointer returned clashes with
error values. This is especially the case on some Atmel SoCs.

This introduces dev_request_mem_resource which returns a struct resource
instead which in any case can be checked with IS_ERR(). It's the drivers
responsibility then to get the IOMEM pointer from the resource.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

bbu: Add function to check if an update handler exists ...

This adds a function to check for the existence of an update handler
based on the supplied bbu_data.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

include: linux: add circular buffers ...

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

regmap: Add missing prototype for regmap_exit() ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: Fix erasing of devices >4GiB ...

When a device >4GiB is erased, not only the offset can be bigger
than 4GiB, but also the size. This happens with the simplest command
to erase a device: erase /dev/nand0. Make the size argument a 64bit
type to make this work.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: Make erase_info structs 64bit where necessary ...

Make the userspace structs 64bit where necessary. Since we do not have
separated kernel/userspace in barebox we can just modifiy the original
structs instead of adding separate 64bit structs.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/regmap'

Merge branch 'for-next/ratp'

Merge branch 'for-next/net'

Merge branch 'for-next/misc'

Merge branch 'for-next/linux-headers'

Merge branch 'for-next/input'

Merge branch 'for-next/hab'

Add initial regmap support ...

This adds initial regmap support. Function prototypes are from
the Kernel, the implemention is mostly rewritten. Currently the
regmap support is limited to the bare minimum to get started.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

imx: hab: Make hab status functions SoC specific ...

The HABv4 functions need access a part of the ROM which is
located in the zero page. This must be done early, before the
MMU has been configured and the zero page has been set to faulting.
The HAB functions currently use cpu_is_imxxy(). At the stage where
HAB is called the i.MX CPU type variable is not yet initialized,
so this code only works when only one i.MX type is enabled and
cpu_is_imxxy() are compile time constants.

To fix HAB support when more than one i.MX type is enabled make the
HAB status function SoC specific so that we can drop the use of
cpu_is_imxxy().

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

miitool: Add code to register a PHY ...

This commit changes the behaviour of the 'miitool'. Now in order to show
PHY's link information 'miitool' should be invoked as such:

miitool -s [PHY]

Also, implment code to allow to register a dummy PHY device in order to
be able to perform raw MDIO bus access.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

bitops: Fix shift overflow in GENMASK macros ...

Based on the original patch for linux:

	commit 00b4d9a
	Author: Maxime COQUELIN <maxime.coquelin@st.com>
	Date:   Thu Nov 6 10:54:19 2014

	On some 32 bits architectures, including x86, GENMASK(31, 0) returns 0
	instead of the expected ~0UL.

	This is the same on some 64 bits architectures with GENMASK_ULL(63, 0).

	This is due to an overflow in the shift operand, 1 << 32 for GENMASK,
	1 << 64 for GENMASK_ULL.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>