rtc: ds1307: Add support for configuring external clock pin ...

The DS1307 has a square wave output pin, which can be used to output a
clock signal from the DS1307.  Additionally, the DS1308 supports
configuring this pin as an input from an external clock source to
which it should sync itself.

Add support with OF device tree properties to configure these
settings.  Supported features are using the clock pin as an output, an
input, the rate of the pin, and if it should be enabled on battery
backup power.

The driver does not check that the selected features are supported by
the clock chip being used.  It is the designer's responsibility to
create a valid device tree node; the bootloader does not attempt to be
a device tree validator.

Signed-off-by: Trent Piepho <tpiepho@kymetacorp.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

bootm: Optionally add a root= option to Kernel command line ...

It becomes a common case that the Kernel is loaded from the filesystem
which later becomes the rootfs. This adds a possibility to let bootm
automatically append the root= option to the kernel command line. This
is done when global.bootm.appendroot is true.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

bbu: Allow to refresh/repair images ...

Some SoCs allow to store multiple boot images on a device in order to
improve robustness. This adds a -r option to barebox_update to indicate
we do not want to make an update but instead repair/refresh an existing
image. Handlers which want to support this feature must set the
BBU_HANDLER_CAN_REFRESH flag during registration.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/squashfs'

Merge branch 'for-next/misc'

Merge branch 'for-next/doc'

fs: add support for SquashFS 4.0 ...

The driver was imported from Linux 4.4.

Current implementation supports only XZ decompressor.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Tested-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation/filesystems: pstore: fix formatting ...

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation/filesystems: add barebox prompt to the shell commands ...

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation: fastboot: fastboot erase is implemented ...

fastboot erase was implemented from the start, remove note stating
that it's not implemented.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation: Update USB fastboot section ...

Add some documentation about fastboot 'flash' command and some useful
example how to use it to boot an initrd.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation: usb: fix otg mode parameter description ...

Replace ``device`` otg.mode option with the correct ``peripheral``.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation: networking: improve docs ...

Add the following improvements:

- clarify commands vs. filesystems for network file transport protocols
- Beautify links with prosa text instead of standard headlines
- adapt 'devinfo eth0' parameter output to current code
- improve console texts
- add docs for netconsole.active

Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation: user manual: improve tftp description ...

Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation: filesystems: tftp: bring in line with other filesystem docs ...

Clarify that this is about the TFTP filesystem implementation, in
contrast to the tftp command.

Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation: user manual: clarify kconfig+kbuild ...

Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation: user manual: include documentation for remote-control ...

This documentation snippet was already added to the tree, but not
included anywhere.

Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation: m25p80: include in documentation ...

Fix this warning:

checking consistency...  [...]Documentation/devicetree/bindings/mtd/m25p80.rst:: WARNING: document isn't included in any toctree

by including the document.

Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation: booting linux: improve wording ...

'bootm' is the lowlevel boot command, in contrast to 'boot', which is
more highlevel.

Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/ratp'

Merge branch 'for-next/net'

nfs: forward filesystem options to the kernel command line ...

Using NFS in conjunction with boot spec and the feature to let Barebox
auto generate a kernel command line must keep the options the NFS filesystem
was mounted in Barebox. This patch extends the kernel command line parameter
on demand if something different than the defaults are used.

The command:

barebox:/ boot nfs://myhost//root

expands to the kernel command line:

nfsroot=myhost:/root,v3,tcp

while the command:

barebox:/ boot nfs://myhost:2049//root

expands now to the kernel command line:

nfsroot=myhost:/root,v3,tcp,mountport=2049,port=2049

Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

docs: fix typos ...

Signed-off-by: Ulrich Ölmann <u.oelmann@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

barebox remote control: Documentation ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/pstore'

environment: Support env from file in a file-system via device tree ...

Current barebox,environment node only allows specifying a raw device or
partition to load an environment from.  Some boards, like OMAP and
SoCFPGA, instead want to use a file located in a FAT filesystem.
Extend the device tree bindings with a new property 'file-path' that
will trigger this behavior.

This allows any board using this driver to get the env from a file or
from a raw device, instead of each machine type being either raw
device only or file only.

Signed-off-by: Trent Piepho <tpiepho@kymetacorp.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

state: implement signed int support ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation: Document pstore/RAMOOPS ...

Add some documentation about behaviour and setup of pstore/RAMOOPS.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

state: backend_raw: add hmac support ...

This patch adds hmac support to the raw backend.

With this patch, modifications of the header or data of a state partition can
be detected, as the hmac woudln't match anymore. The hmac relies on a shared
secret, which is requested from the keystore, with keystore_get_secret() using
the name of the state partition as the "name" of the secret.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: Add support for semihosting ...

Add semihosting API implementation and implement a filesystem driver
to access debugging host filesystem using it.

Tested on Freescale SabreSD board (i.MX6Q) using OpenOCD

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>