LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

History for barebox / arch

2016-05-17	11e32a5 Browse files » ARM: i.MX: IIM: Add functions to access fuses field wise ... Accessing the IIM registers is cumbersome. The fuses are documented with different register strides and there is no header file available, so the different fields have to be read in the datasheets and translated into the barebox format over and over again. This patch adds a header file which has defines for the various fuses (for i.MX25 only so far, but others can be added later) along with C functions to read/write the fields. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 17 May 2016
2016-05-10	7839011 Browse files » bootm: Move bootm options to common/Kconfig ... bootm has a C API, so the bootm options have to depend on the option providing the bootm code (CONFIG_BOOTM), not on the option providing the command (CONFIG_CMD_BOOTM). Fixing the dependencies makes it possible to fully use bootm from C without enabling the bootm command support. This also removes the CMD_ prefix from the options which means we have to update the defconfigs aswell. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 10 May 2016
2016-05-10	5399f21 Browse files » ARM: mxs: add parameter to mx28_mem_init to allow custom memory config ... Rename the already global array of default memory settings to make the intended usage more obvious. Also make generous use of the const keyword. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Uwe Kleine-König authored on 9 May 2016 Sascha Hauer committed on 10 May 2016
2016-05-09	fd2f990 Browse files » Merge branch 'for-next/mtd' Sascha Hauer committed on 9 May 2016
	4cb8e17 Browse files » Merge branch 'for-next/misc' Sascha Hauer committed on 9 May 2016
	854df60 Browse files » Merge branch 'for-next/include-pdata' Sascha Hauer committed on 9 May 2016
	55aca0a Browse files » Merge branch 'for-next/include-cleanup' Sascha Hauer committed on 9 May 2016
	216f412 Browse files » Merge branch 'for-next/imx6-phytec' Sascha Hauer committed on 9 May 2016
	21981db Browse files » Merge branch 'for-next/imx' Sascha Hauer committed on 9 May 2016
	23debc6 Browse files » Merge branch 'for-next/arm' Sascha Hauer committed on 9 May 2016
2016-05-04	07511ba Browse files » ARM: phytec-som-imx6: add automount for first partition on eMMC ... For the phyCORE-i.MX6 add an automount command for the first partition on the eMMC device. Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Stefan Christ authored on 4 May 2016 Sascha Hauer committed on 4 May 2016
2016-05-02	95e1132 Browse files » ARM: phytec-som-imx6: add NOR for phycore-imx6 emmc ... Enable NOR for phyCORE-i.MX6 DualLite and Quad eMMC variants. Furthermore add an extra 'status = "disabled"' in the flash node. It has no functional effect, because the SPI bus node 'ecspi1' is disabled, too. Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Stefan Christ authored on 27 Apr 2016 Sascha Hauer committed on 2 May 2016
	a6ec1b5 Browse files » ARM: phytec-som-imx6: adapt main update handler for eMMC ... Some phyCORE-i.MX6 variants have eMMC instead of a NAND chip. Provide an update_handler for them. Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Stefan Christ authored on 27 Apr 2016 Sascha Hauer committed on 2 May 2016
	ac02c15 Browse files » ARM: phytec-som-imx6: rename environment folder ... The extra environment folder for the phyCORE-i.MX6 had the suffix '-mira'. That's the name of a baseboard. Since the bootloader is generic for all baseboards, use a generic suffix for the environment folder. Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Stefan Christ authored on 27 Apr 2016 Sascha Hauer committed on 2 May 2016
	da3938f Browse files » ARM: phytec-som-imx6: update RAM calibration for phycore-imx6dl ... Update RAM calibration values in the flashheader file for phyCORE-i.MX6 DualLite/Solo. These are verified and tested in the climatic chamber for commercial, extended commercial, industrial and automotive i.MX6 variants. Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Stefan Christ authored on 27 Apr 2016 Sascha Hauer committed on 2 May 2016
	313e01f Browse files » ARM: phytec-som-imx6: add phyCORE-i.MX6 DualLite ... Add Phytec phyCORE-i.MX6 SOM. Support: - imx6dl-phytec-phycore-som-emmc: - 1GB RAM on 1 Bank with 64Bit - 10/100MBit Ethernet - SPI NOR - eMMC - SD - UART Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Stefan Christ authored on 27 Apr 2016 Sascha Hauer committed on 2 May 2016
	cb3fc0d Browse files » ARM: phytec-som-imx6: add phyCORE-i.MX6 Quad 2GiB RAM ... Add new Phytec phyCORE-i.MX6 SOM: Support: - imx6q-phytec-phycore-som-emmc: - 2GiB RAM on 1 Bank with 64Bit - 1GBit Ethernet - SPI NOR - eMMC - SD - UART Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Christian Hemp authored on 27 Apr 2016 Sascha Hauer committed on 2 May 2016
	c3318ae Browse files » ARM: phytec-som-imx6: fix bootsource for phyCORE-i.MX6 ... The phyCORE-i.MX6 has either a NAND or EMMC storage device and an external SD-Card interface. The automatic bootsource detection in the barebox environment should reflect that. - If the board was booted from the external SD-Card interface, it should continue loading the kernel and device tree from it. - If the board was booted from EMMC, it should load kernel and device tree from the boot partition on the EMMC. Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Stefan Christ authored on 27 Apr 2016 Sascha Hauer committed on 2 May 2016
	0a7a5e7 Browse files » ARM: phytec-som-imx6: add barebox partitions for MMC ... Add missing MMC barebox environment partitions for the phyCORE-i.MX6 with EMMC. Otherwise the barebox cannot find the environment, when the board is boot from sd-card. Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Stefan Christ authored on 27 Apr 2016 Sascha Hauer committed on 2 May 2016
	52fdd51 Browse files » ARM: dts: pfla02: use long enough reset for ethernet phy ... Use a longer reset time for ethernet phy Micrel KSZ9031RNX. Otherwise a small percentage of modules have 'transmission timeouts' errors like barebox@Phytec phyFLEX-i.MX6 Quad Carrier-Board:/ ifup eth0 warning: No MAC address set. Using random address 7e:94:4d:02:f8:f3 eth0: 1000Mbps full duplex link detected eth0: transmission timeout T eth0: transmission timeout T eth0: transmission timeout T eth0: transmission timeout T eth0: transmission timeout Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Stefan Christ authored on 27 Apr 2016 Sascha Hauer committed on 2 May 2016
	90b2fa7 Browse files » ARM: dts: imx6: phyboards: reduce clock speed for usdhc3 ... Due to hardware issues the usdhc3 interface on phyBOARD-ALCOR i.MX6 and phyBOARD-SUBRA i.MX6 doesn't work reliable at 50Mhz. You get communication errors like barebox@Phytec phyBOARD SUBRA:/ ls /mnt/mmc/ mmc2: detected SD card version 2.0 mmc2: registered mmc2 imx-esdhc 2198000.usdhc: timeout 2 mmc2: Cannot read MBR/partition table Therefore reduce the maximum clock speed to avoid these problems. Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Stefan Christ authored on 27 Apr 2016 Sascha Hauer committed on 2 May 2016
	6444998 Browse files » imx6qdl-phytec-pfla02.dtsi: add i2c eeprom ... add atmel,24c32 mounted on module Signed-off-by: Jan Remmet <j.remmet@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jan Remmet authored on 27 Apr 2016 Sascha Hauer committed on 2 May 2016
	ca5964b Browse files » ARM: imx6q: add support for phyBOARD-SUBRA-i.MX6 Quad ... Add support for phyBOARD-SUBRA-i.MX6 with phyFLEX-i.MX6 Quad 1GiB on one bank. This patch factors out the common device tree nodes for the Quad and Solo variant into 'imx6qdl-phytec-phyboard-subra.dtsi'. Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Stefan Christ authored on 27 Apr 2016 Sascha Hauer committed on 2 May 2016
	8b0a448 Browse files » ARM: imx_v7_defconfig: add command mmc_extcsd ... Enable the mmc_extcsd command to read and write MMC/eMMC registers. Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Stefan Christ authored on 27 Apr 2016 Sascha Hauer committed on 2 May 2016
	075de1e Browse files » ARM: imx_v7_defconfig: enable NANDTEST command ... Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Stefan Christ authored on 27 Apr 2016 Sascha Hauer committed on 2 May 2016
2016-04-28	9d5cf8d Browse files » ARM: i.MX: karo-tx6: Add support for the 2GiB i.MX6q+ board variant ... Different SDRAM setup, but same board otherwise. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 28 Apr 2016
2016-04-27	3fb70de Browse files » ARM: i.MX: increase barebox partition sizes ... After doing a 'saveenv' command, it is no longer possible to boot. The reason for this behaviour is that the 'barebox' partition has currently a size of 0x80000 (512 kB), which is not sufficient to store the barebox binary. This causes the 'barebox' and 'barebox-environment' partitions to overlap. Fix this problem by increasing the size of the 'barebox' partition and by placing the 'barebox-environment' right after it. This patch increases the barebox partition for all i.MX boards to 0xe0000 Reported-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 Apr 2016
	76007a8 Browse files » ARM: GuF Vincell: run code for LT variant aswell ... The LT variant has a different compatible, yet we want to run the code on this variant aswell. Add the corresponding test. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 Apr 2016
	339ea9f Browse files » ARM: dts: Fix partition names ... Partition names shouldn't be continuously numbered, instead the part behind the '@' should match the reg property. Fix this for all ARM device trees. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Fabio Estevam <festevam@gmail.com> Sascha Hauer committed on 27 Apr 2016
2016-04-25	bbdb04b Browse files » ARM: Bootm: FIT image handler depends on CONFIG_FITIMAGE ... CONFIG_FITIMAGE is the variable to depend on, not CONFIG_CMD_BOOTM_FITIMAGE which is only a wrapper option to let CONFIG_FITIMAGE select from the bootm Kconfig menu. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 25 Apr 2016