Documentation: remove doxygen documentation ...

The doxygen documentation is long outdated. Remove it. It will
be replaced with sphinx based documentation later.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: gpio_direction_output: add missed VALUE parameter to help message ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: harmonize in-barebox documentation ...

This patch does probably too much, but it's hard (and very
cumbersome/time consuming) to break it out. What is does is this:

* each command has one short description, e.g. "list MUX configuration"
* made sure the short descriptions start lowercase
* each command has one usage. That string contains just the
  options, e.g. "[-npn]". It's not part of the long help text.
* that is, it doesn't say "[OPTIONS]" anymore, every usable option
  is listed by character in this (short) option string (the long
  description is in the long help text, as before)
* help texts have been reworked, to make them
  - sometimes smaller
  - sometimes describe the options better
  - more often present themselves in a nicer format
* all long help texts are now created with BUSYBOX_CMD_HELP_
  macros, no more 'static const __maybe_unused char cmd_foobar_help[]'
* made sure the long help texts starts uppercase
* because cmdtp->name and cmdtp->opts together provide the new usage,
  all "Usage: foobar" texts have been removed from the long help texts
* BUSYBOX_CMD_HELP_TEXT() provides the trailing newline by itself, this
  is nicer in the source code
* BUSYBOX_CMD_HELP_OPT() provides the trailing newline by itself
* made sure no line gets longer than 77 characters
* delibertely renamed cmdtp->usage, so that we can get compile-time
  errors (e.g. in out-of-tree modules that use register_command()
* the 'help' command can now always emit the usage, even without
  compiled long help texts
* 'help -v' gives a list of commands with their short description, this
  is similar like the old "help" command before my patchset
* 'help -a' gives out help of all commands

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: group 'help' output ...

The old output of "help" was just producing a long list, that usually
scrolled of the screen (even on a X11 terminal). This list is more
compact, and also sorted by groups.

The old output format (plus grouping) is now available with 'help -v'.

Example:

   Information commands:
     ?, devinfo, help, iomem, meminfo, version
   Boot commands:
     boot, bootm, go, loadb, loads, loadx, loady, saves, uimage
   ...

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Treewide: remove address of the Free Software Foundation ...

The FSF address has changed in the past. Instead of updating it
each time the address changes, just drop it completely treewide.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: remove struct command pointer from commands ...

This is unused in all commands and thus can be removed.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Fix a typo in the GPIO doc ...

Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

doc: rework and unify documentation for gpio commands ...

Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>

Fix a simple typo to less confusing the user ...

Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Add some help using the gpio commands at runtime ...

Last time I used the gpio commands I was somehow confused about the behaviour
of the 'gpio_get_value' command. So, I decided to add some doc for it. Here's
the result.

Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

remove typedef cmd_tbl_t and replace it with struct command ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

rename U-Boot-v2 project to barebox ...

This has been done with the following script:

find -path ./.git -prune -o -type f -print0 | xargs -0 -r sed -i \
	-e 's/u2boot/barebox/g' \
	-e 's/U2Boot/barebox/g' \
	-e 's/U-boot V2/barebox/g' \
	-e 's/u-boot v2/barebox/g' \
	-e 's/U-Boot V2/barebox/g' \
	-e 's/U-Boot-v2/barebox/g' \
	-e 's/U_BOOT/BAREBOX/g' \
	-e 's/UBOOT/BAREBOX/g' \
	-e 's/uboot/barebox/g' \
	-e 's/u-boot/barebox/g' \
	-e 's/u_boot/barebox/g' \
	-e 's/U-Boot/barebox/g' \
	-e 's/U-boot/barebox/g' \
	-e 's/U-BOOT/barebox/g'

find -path ./.git -prune -o \( -name "*u-boot*" -o -name "*uboot*" -o -name "*u_boot*" \) -print0 | \
	xargs -0 -r rename 's/u[-_]?boot/barebox/'

It needs some manual fixup following in the next patch

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

command line gpio support ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>