net: eth: Remove ethaddr_param ...

commit d00db554 introduce ethaddr_param. But it is not initialized, so
devinfo fails to show the mac. Remove it and use edev->ethaddr.

Signed-off-by: Jan Remmet <j.remmet@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: eth: Fixup OF tree with registered MAC addresses too ...

The eth code registers an OF tree fixup that looks for any nodes in
the Linux oftree that match eth devices loaded in barebox and sets the
mac-address property in those nodes.  The purpose is to pass MAC
addresses to the Linux kernel for drivers that expect the MAC address
to be in the device tree.

If barebox does not have a driver for the network device, either
because it has been disabled or because one does not exist, then the
OF tree will not be fixed up to include a MAC address.

The eth code also has a list of MAC addresses which board code has
registered, usually done when it reads the address from an EEPROM or
on-chip memory.  If an eth device is created later in the boot, it
will look here for an address.

The registered MAC address list is not used for the OF tree fix up,
and this patch changes that.  This way barebox can place a MAC address
in the device-tree without needing a driver for the network device.

Signed-off-by: Trent Piepho <tpiepho@kymetacorp.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: eth: Refactor OF tree fixup of one node into new function ...

Code that fixes up one node with a new MAC address is refactored into
a new function that eth_of_fixup() calls in a loop.

Signed-off-by: Trent Piepho <tpiepho@kymetacorp.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/net'

net: make eth_register_ethaddr work on registered network devices ...

When eth_register_ethaddr is called after the device has been registered
it should work aswell.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: eth_send: Allow to use multiple network interfaces at once ...

The commit

commit be0404c
Author: Sascha Hauer <s.hauer@pengutronix.de>
Date:   Wed May 14 16:08:04 2014 +0200

    net: Allow to use multiple network interfaces at once

changes the eth_send() function:

-       return eth_current->send(eth_current, packet, length);
+       return edev->send(eth_current, packet, length);

But we have to change the both eth_current occurrences to edev here!

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: eth: Do not rely on CONFIG_PARAMETER to be enabled ...

register_preset_mac_address only works when CONFIG_PARAMETER
is enabled because otherwise dev_set_param is a no-op. Add a
function to set the MAC address explicitly without the need
of CONFIG_PARAMETER and use it where appropriate.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

eth: halt active ethernet device on unregister ...

When an active ethernet device is unregistered it should
be halted to quiesce the device.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: Call edev->recv with correct eth_device ...

edev->recv has to be called with edev as argument, not eth_current.
This fixes networking when multiple network devices are used and the
current one is switched during runtime.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: take eth id from devicetree alias ...

If the devicetree has an alias for the ethernet device, then use
it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: Allow to use multiple network interfaces at once ...

In barebox network packets always go out at the current ethernet
device and are expected to be received from the current interface.
This has some side effects. When for example an NFS is mounted when
one interface is active and the interface is changed afterwards the
NFS packets leave the new interface, but the NFS server won't be
reachable there.

Instead of changing the whole network traffic to the current ethernet
interface we now initialize a network connection with the current
network interface, but then the connection will continue to use that
interface even when the current interface is changed.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

param: Add dev_add_param_mac ...

This adds a convenience function to register a MAC address device
parameter. The only current user is converted to use it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/nfs' ...

Conflicts:
	defaultenv/defaultenv-2-base/bin/ifup

Merge branch 'for-next/mtd' ...

Conflicts:
	drivers/mtd/core.c
	net/eth.c

net: constify eth_get_byname argument ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

device: remove parameters when unregistering a device ...

Otherwise we loose memory on each device_unregister. The ethernet
code used to do this before calling unregister_device. This can
now be removed.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

remove redundant NULL check on free ...

free() already checks the pointer to be non
NULL. No need to do it again.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

treewide: Add missing includes ...

A lot of files rely on include/driver.h including include/of.h (and
this including include/errno.h. include the files explicitly so we can
eventually get rid of including of.h from driver.h

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: Add a context pointer to fixup functions ...

If drivers want to fixup their specific instance they need some context
to know which instance they have to fixup.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net, of: fixup MAC address by alias ...

If a network device has not been registered from the devicetree, we may
still find it by its alias in the devicetree. This way also platform based
network devices can obtain a valid MAC address in the devicetree.

Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: net: Use correct devicetree in eth_of_fixup ...

eth_of_fixup() is passed a devicetree, so use this one instead
of the internal devicetree. This makes sure it also works when
the tree to fixup is not the internal one.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next-manual/oftree-linux-sync'

net: Set mac-address property ...

Linux normally has no idea how to retrieve MAC Addresses, but instead
expects the MAC address in the devicetree. This patch adds the MAC
address to the devicetree for Linux if we find a valid one in barebox.
This mechanism is limited of course to devices barebox has a driver for
and which are probed themselves from the devicetree.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: Add of_register_ethaddr ...

We already have a possibility to register a MAC address provider
based on a ethernet device id. This adds a similar functionality
for devices probed from devicetree. Code can register itself to
be a MAC address provider for a certain devicetree node.

This helps on i.MX to let the IIM unit provide a MAC address for
the FEC.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: store ethernet device parameters in device ...

Rather than storing the parameters globally and trying to keep them
in sync with the device parameters, store the parameters in the ethernet
device directly. Also, update to dev_add_param_ip().

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'pu/net-link'

net phylib: force to wait for link ...

When starting a network device wait until the link is up. Otherwise
autobooting does not work with little timeout and several attempts
have to be made until the network is finally up.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

drivers/base: fix corrupt device tree ...

dev_add_child is a very unsafe function. If called multiple times
it allows setting the same device to different parents thus corrupting
the siblings list. This happens regularly since:

| commit c2e568d
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| Date:   Sat Nov 3 16:11:05 2012 +0100
|
|    bus: add bus device
|
|    automatically add it as parent of any bus device if none already specified
|
|    we have now a nice output per bus

If for example a FATfs is mounted this nice output per bus often ends with:

>     `---- fat0
>     `---- 0
>          `---- 0x86f0000087020031-0x86f000410df27124: /dev/<NULL>
>          `---- sram00
>               `---- 0x00000000-0xffffffffffffffff: /dev/<NULL>
>               `---- 0x00000000-0xffffffffffffffff: /dev/<NULL>
>               unable to handle NULL pointer dereference at address 0x0000000c
> pc : [<87f08a20>]    lr : [<87f08a04>]
> sp : 86eff8c0  ip : 87f3fbde  fp : ffffffff
> r10: ffffffff  r9 : 00000000  r8 : 00000003
> r7 : 86f075b8  r6 : 00000002  r5 : ffffffec  r4 : 86f07544
> r3 : 00000000  r2 : 43f900b4  r1 : 00000020  r0 : 00000005
> Flags: Nzcv  IRQs off  FIQs off  Mode SVC_32
> [<87f08a20>] (do_devinfo_subtree+0x90/0x130) from [<87f08a90>] (do_devinfo_subtree+0x100/0x130)
>
> [<87f3e070>] (unwind_backtrace+0x0/0x90) from [<87f28514>] (panic+0x28/0x3c)
> [<87f28514>] (panic+0x28/0x3c) from [<87f3e4b8>] (do_exception+0x10/0x14)
> [<87f3e4b8>] (do_exception+0x10/0x14) from [<87f3e544>] (do_data_abort+0x2c/0x38)
> [<87f3e544>] (do_data_abort+0x2c/0x38) from [<87f3e268>] (data_abort+0x48/0x60)

This patch fixes this by adding a device to its parents children list in
register_device so that dev_add_child is no longer needed. This function
is removed from the tree. Now callers of register_device have to clearly
set the parent *before* registering a device.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reported-by: Jan Lübbe <jlu@pengutronix.de>

net phylib: Call phy_update_status when no link is present ...

We call phy_update_status only once in 5 seconds. This makes
sure we do not have great overhead when using ethernet devices.
However, if phylib tells us the link is down anyway, there won't
be ethernet transfers, so it doesn't hurt to call phy_update_status
in this case. This makes sure we can use the ethernet device when
the link comes up and do not have an additional 5 second penalty
in this case.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/misc' ...

Conflicts:
	commands/Makefile

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>