Merge branch 'for-next/ubi'

Merge branch 'for-next/omap'

Merge branch 'for-next/misc'

Merge branch 'for-next/mips'

Merge branch 'for-next/imx'

Merge branch 'for-next/arm64'

Merge branch 'for-next/arm'

ARM i.MX35: Add support for the Amazon Kindle3 ...

The Amazon Model No. D00901 Kindle3 is an E-Book reader based on the
i.MX35 SOC. The device boots in internal boot mode from a build-in eMMC,
alternatively the device may be set into USB-downloader mode when the
Vol+ key is pressed on startup.

Add support for this device and make barebox a drop-in replacement for
the factory shipped u-boot image.
Constraints for the use as drop-in replacement:
- imximg header (offset 0x400) has a maximum size of 2kB minus 16 byte
  since the last 16 bytes are used to store a vendor specific hardware
  desctription identifier
- the bootloader space (application plus env) is limited to 256kB minus
  16 bytes when installed with offset of 4kB (the u-boot offset was 3kB).
  A vendor specific device identifier is stored in the gap between
  application and kernel. The vendor specific identifiers should not
  be overwritten.

Notable features:
- Support for eMMC, USB, UART, I2C, SPI and Keys (except keyboard)
- Full support for vendor specific ATAGs
- usbserial barebox console access by pressing Select button at startup,
  alternatively full console support on connector J14.

Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: imx_defconfig: enable NAND_IMX_BBM and NAND_ALLOW_ERASE_BAD ...

The first is important for imx systems with NAND. The second is a useful
debug aid that doesn't change behaviour without being explicitly enabled
at runtime. So both should be safe.

The other changes result from MFD_MC13XXX and SPI_IMX being selected by
MACH_PCM038 since 4bd07a103982 ("arm: imx: select MFD_MC13XXX for all
boards that need it") and a move of a few Kconfig definitions in
7839011f61c0 ("bootm: Move bootm options to common/Kconfig").

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mfd: mc13xxx: VGEN1 and VGEN2 voltage bits positioned in "Regulator Setting 0" register ...

The bits VGEN10-11 and VGEN20-22 is positioned in the Regulator Setting 0
register. This patch fixes these definitions and board (Efika MX), which
uses this voltages.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX: iim: fix potential out of bounds array access ...

The check is off-by-one.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: csrc-r4k: get cp0 counter rate from devicetree ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX: karo-tx6: Add support for the 512MiB i.MX6s variant ...

This adds support for the TX6S-8x35 board variant.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arm: include: swab: use rigth assembly for armv8 ...

Signed-off-by: Raphael Poggi <poggi.raph@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arm: boards: add mach-qemu and virt64 board ...

Introduce mach-qemu and add qemu virt64 board which emulates arm64 board.

Signed-off-by: Raphael Poggi <poggi.raph@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arm: cpu: add basic arm64 mmu support ...

This commit adds basic mmu support, ie:
        - DMA cache handling is not supported
        - Remapping memory region also

The current mmu setting is:
        - 4KB granularity
        - 3 level lookup (skipping L0)
        - 33 bits per VA

This is based on coreboot and u-boot mmu configuration.

Signed-off-by: Raphael Poggi <poggi.raph@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arm: cpu: disable code portion in armv8 case ...

Enclosed by #if directive OMAP specific code
and mmu_disable (ARMv8 code will implemented it somewhere else).

Signed-off-by: Raphael Poggi <poggi.raph@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arm: cpu: cpuinfo: add armv8 support ...

Signed-off-by: Raphael Poggi <poggi.raph@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arm: include: system_info: add armv8 identification ...

Signed-off-by: Raphael Poggi <poggi.raph@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arm: include: bitops: arm64 use generic __fls ...

Signed-off-by: Raphael Poggi <poggi.raph@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arm: include: system: add arm64 helper functions ...

Signed-off-by: Raphael Poggi <poggi.raph@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arm: cpu: add arm64 specific code ...

This patch adds arm64 specific codes, which are:
	- exception support
	- cache support
	- rework Makefile to support arm64

Signed-off-by: Raphael Poggi <poggi.raph@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arm: rework lib directory to support arm64 ...

This commit create a common directory, lib/,
for arm and arm64 common code.

It also create lib32/ and lib64/ for 32bit
and 64bit code respectively.

Signed-off-by: Raphael Poggi <poggi.raph@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arm: Makefile: rework makefile to handle armv8 ...

Signed-off-by: Raphael Poggi <poggi.raph@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arm64: add armv8 Kconfig entries ...

Signed-off-by: Raphael Poggi <poggi.raph@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: bootm: Fix compiler warning ...

fixes:
arch/arm/lib/bootm.c:92:137: warning: comparison of distinct pointer
types lacks a cast

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM i.MX31 iomux: remove duplicates with alternate name ...

Three iomux were accessinble with two distinct names, typo?
Remove the unused duplicates.

Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM i.MX31 iomux: remove obvious duplicates ...

No need to define some of the iomux twice, remove the duplicates.

Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

imx35-regs: add and use common CGR element shifters ...

Add some missing Clock Gate Register element shifters which were implemented
as magic numbers in the arm/boards directory. Use the new shifters for
inproved code readability.

Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: bootm: recalculate decompression space ...

According to the kernel documentation it is recommended to place the
compressed image between 32 MiB and 128 MiB. The DTB and initrd should
be placed above 128 MiB. We will follow the recommendation as long as we
have enough RAM. If this is not the case, we fall back to the scheme.
This change is required because of the ARM default kernel config changes
regarding RODATA layout, which lead to an increased compression factor
of the kernel image.
This should be regarded as an intermediate solution until there is a
mechanism for the kernel image to report the decompressed layout
requirements to the bootloader.

Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>