Merge branch 'for-next/video'

Merge branch 'for-next/state'

Merge branch 'for-next/nvdevvars'

Merge branch 'for-next/misc'

Merge branch 'for-next/mips'

Merge branch 'for-next/imx'

state: Refactor state framework ...

The state framework grew organically over the time. Unfortunately the
architecture and abstractions disappeared during this period.

This patch refactors the framework to recreate the abstractions. The
main focus was the backend with its storage. The main use-case was to
offer better NAND support with less erase cycles and interchangeable
data formats (dtb,raw).

The general architecture now has a backend which consists of a data
format and storage. The storage consists of multiple storage buckets
each holding exactly one copy of the state data. A data format describes
a data serialization for the state framework. This can be either dtb or
raw. A storage bucket is a storage location which is used to store any
data. There is a (new) circular type which writes changes behind the
last written data and therefore reduces the number of erases. The other
type is a direct bucket which writes directly to a storage offset for
all non-erase storage.

Furthermore this patch splits up all classes into different files in a
subdirectory.

This is currently all in one patch as I can't see a good way to split
the changes up without having a non-working state framework in between.

The following diagram shows the new architecture roughly:

           .----------.
           |  state   |
           '----------'
                 |
                 |
                 v
  .----------------------------.
  |       state_backend        |
  |----------------------------|
  | + state_load(*state);      |
  | + state_save(*state);      |
  | + state_backend_init(...); |
  |                            |
  |                            |
  '----------------------------'
    |            |                   The format describes
    |            |                   how the state data
    |            '------------->     is serialized
    |   .--------------------------------------------.
    |   |      state_backend_format <INTERFACE>      |
    |   |--------------------------------------------|
    |   | + verify(*format, magic, *buf, len);       |
    |   | + pack(*format, *state, **buf, len);       |
    |   | + unpack(*format, *state, *buf, len);      |
    |   | + get_packed_len(*format, *state);         |
    |   | + free(*format);                           |
    |   '--------------------------------------------'
    |              ^                      ^
    |              *                      *
    |              *                      *
    |   .--------------------. .--------------------.
    |   | backend_format_dtb | | backend_format_raw |
    |   '--------------------' '--------------------'
    |
    |
    |
    v
.----------------------------------------------------------.
|                  state_backend_storage                   |
|----------------------------------------------------------|
| + init(...);                                             |
| + free(*storage);                                        |
| + read(*storage, *format, magic, **buf, *len, len_hint); |
| + write(*storage, *buf, len);                            |
| + restore_consistency(*storage, *buf, len);              |
'----------------------------------------------------------'
                              |
     The backend storage is responsible to manage multiple
     data copies and distribute them onto several buckets.
     Read data is verified against the given format to
     ensure that the read data is correct.
                              |
                              |
                              |
                              |
                              |
                              v
        .------------------------------------------.
        | state_backend_storage_bucket <INTERFACE> |
        |------------------------------------------|
        | + init(*bucket);                         |
        | + write(*bucket, *buf, len);             |
        | + read(*bucket, **buf, len_hint);        |
        | + free(*bucket);                         |
        '------------------------------------------'
                      ^     ^      ^
                     *      *       *
                    *       *        *
 A storage bucket represents*exactly one data copy at one
 data location. A circular b*cket writes any new data to
 the end of the bucket (for *educed erases on NAND). A
 direct bucket directly writ*s at one location.
               *            *             *
              *             *              *
             *              *               *
 .-----------------------.  *  .-------------------------.
 | backend_bucket_direct |  *  | backend_bucket_circular |
 '-----------------------'  *  '-------------------------'
             ^              *               ^
             |              *               |
             |              *               |
             |              *               |
             |  .-----------------------.   |
             '--| backend_bucket_cached |---'
                '-----------------------'
             A backend_bucket_cached is a transparent
             bucket that directly uses another bucket
             as backend device and caches all accesses.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

libfile: Change write_full to be have const buf ...

write() uses a const pointer so write_full should do the same.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mfd: mc13xxx: VGEN1 and VGEN2 voltage bits positioned in "Regulator Setting 0" register ...

The bits VGEN10-11 and VGEN20-22 is positioned in the Regulator Setting 0
register. This patch fixes these definitions and board (Efika MX), which
uses this voltages.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

compiler: avoid redefining symbols when running with checker ...

Avoid redefining __user and __kernel if running with a checker
enabled.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: base: import of_get_cpu_node() from linux-v4.7-rc2 ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

uimage: add define for ARM64 architecture ...

Signed-off-by: Raphael Poggi <poggi.raph@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Introduce non volatile device variables ...

Non volatile device variables are used to make device parameters
persistent. They are like normal non volatile variables, but set
the values of the device parameters with the corresponding name.
Every nv variable beginning with nv.dev is a non volatile device
variable. They have the form nv.dev.<devname>.<paramname> and act
on the parameter <paramname> of the device named <devname>.

The non volatile device variables are designated for example for
video modes, ethernet device ip addresses or mtd partitioning.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: smc911x: Add parsing devicetree options ...

This patch adds parsing basic devicetree options for the smc911x driver:
reg-io-width, reg-shift and smsc,force-(in/ex)ternal-phy, which makes
driver usable for most DTS-based boards.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Add more files to .gitignore ...

This patch adds more generated files to ignore list.
...
shc@shc /home/git/barebox-github $ git status
На ветке imx51
Неотслеживаемые файлы:
  (используйте «git add <файл>…», чтобы добавить в то, что будет включено в коммит)

        common/barebox_default_env
        common/barebox_default_env.h
        include/asm
        scripts/basic/docproc

ничего не добавлено в коммит, но есть неотслеживаемые файлы (используйте "git add", чтобы отслеживать их)

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

video/edid: Move int_sqrt() out ...

Move int_sqrt() out of drivers/video/edid.c so that it is availible to
other parts of Barebox.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

GUI: Add code to draw simple graphics ...

Add code to draw simple graphics, namely lines(solid or dashed) and
circles.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

GUI: Add a function to draw vertical/horizontal bars ...

Add a function to draw solid vertical or horizontal bars.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/mtd'

Merge branch 'for-next/misc'

Merge branch 'for-next/mips'

Merge branch 'for-next/bootm'

Merge branch 'for-next/aiodev'

MIPS: ath79: dts: sync clk stuff with linux v4.7-rc2 ...

Please see these linux kernel ath79 commits:

    commit 1e6a349
    Author: Antony Pavlov <antonynpavlov@gmail.com>
    Date:   Thu Mar 17 06:34:17 2016 +0300

        MIPS: dts: qca: introduce AR9331 devicetree

    commit 5ae5c45
    Author: Antony Pavlov <antonynpavlov@gmail.com>
    Date:   Thu Mar 17 06:34:18 2016 +0300

        MIPS: ath79: update devicetree clock support for AR9331

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci: Fix version numbers again ...

The SD and eMMC version numbers are a pain to print and sort, since
they are inconsistent in if a two digit minor version shdoulde be
treated as a single number or as minor and micro version numbers.

This allows version 1.10 and 4.5 and 4.41, where 41 is less than 5.

Signed-off-by: Trent Piepho <tpiepho@kymetacorp.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

nvvar: add missing static inline stubs ...

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

globalvar: add missing static inline stubs ...

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

crypto: add CRC32 digest ...

CRC32 digest can be used to check CRC32 hashes in FIT images etc.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

syscon: Do not return NULL when driver is not selected ...

Both syscon_base_lookup_by_pdevname() and
syscon_base_lookup_by_phandle(), when implemented, do not return NULL,
so none of the code using those function is written to check for that.

Change returns to ERR_PTR(-ENOSYS), to avoid having that problem.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

drivers: Introduce AIODEV subsystem ...

AIODEV/Aiodevice is a analog I/O framework that can be thought of as a
simplified hybrid between 'hwmon' and 'IIO' subsystems of Linux kernel

This commit is very heavily based on 'iodevice' framework proposal
written by Sascha Hauer.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>