LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

History for barebox / drivers / usb

2017-03-09	400988a Browse files » usb: imx: Fix setting of dev->priv ... Since fc10539f7d the usbmisc pointer must be stored in dev->priv, but dev->priv has never been set. Fix this. Fixes: fc10539f7d usb: imx: Make usb-misc multi instance safe Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 9 Mar 2017
2017-03-09	d6ef702 Browse files » usb: imx: role_registered contains role ... role_registered contains the role, it's not a bool indicating that a role is registered. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 9 Mar 2017
2017-02-13	2cd2bad Browse files » Merge branch 'for-next/misc' Sascha Hauer committed on 13 Feb 2017
2017-02-13	3013916 Browse files » Merge branch 'for-next/imx' Sascha Hauer committed on 13 Feb 2017
2017-01-30	6d20542 Browse files » usb: ehci: pass full speed devices to companion controller ... According to the "Enhanced Host Controller Interface Specification for Universal Serial Bus" after a USB port reset the EHCI Driver checks the PortEnable bit in the PORTSC register. If set to a one, the connected device is a high-speed device [...]. At the time the EHCI Driver receives the port reset and enable request the LineStatus bits might indicate a low-speed device. Additionally, when the port reset process is complete, the PortEnable field may indicate that a full-speed device is attached. In either case the EHCI driver sets the PortOwner bit in the PORTSC register to a one to release port ownership to a companion host controller. Signed-off-by: Peter Mamonov <pmamonov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Peter Mamonov authored on 26 Jan 2017 Sascha Hauer committed on 30 Jan 2017
2017-01-19	bbe0df9 Browse files » usb: imx: Add clock support ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 19 Jan 2017
	2eb99b6 Browse files » usb: imx: Add usbmisc support for i.MX7 ... Taken directly from Linux-4.10-rc3 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 19 Jan 2017
	fc10539 Browse files » usb: imx: Make usb-misc multi instance safe ... i.MX7 has two usbmisc devices, so we cannot use global instance variables anymore. Create a driver private data struct for it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 19 Jan 2017
2017-01-17	3cfc8bc Browse files » usb: gadget: disable AT91 driver on SAMA5D4 ... This architecture is missing the right defines for the system peripherals, that are needed for this driver to build successfully. Disable it for now until someone with a clue about this architecture can fill in the gap. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 16 Jan 2017 Sascha Hauer committed on 17 Jan 2017
2017-01-12	8108b5a Browse files » i.MX: imx-usb-misc: Add Vybrid support ... Add code to do usbmisc initialization on VF610 family of SoCs. Based on analogous code from Linux kernel. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 10 Jan 2017 Sascha Hauer committed on 12 Jan 2017
	024f720 Browse files » i.MX: Default CONFIG_USB_IMX_PHY to 'y' on Vybrid ... Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 10 Jan 2017 Sascha Hauer committed on 12 Jan 2017
	91bfa2d Browse files » i.MX: imx-usb-phy: Add VF610 OF compatiblity string ... From looking at analogous Linux driver code it seems that all of the differences between code "imx23-usbphy" and "vf610-usbphy" pertain to suspend/resume functionality, which shouldn't affetct Barebox. As a result this commit just adds a compatiblity string and no other code. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 10 Jan 2017 Sascha Hauer committed on 12 Jan 2017
2016-09-29	e21ddc6 Browse files » usb: imx-us-phy: implement notify_(dis)concect ... The i.MX6 USB phy does not recognize disconnects of high speed devices when the USBPHY_CTRL_ENHOSTDISCONDETECT is not set. The phy does not work properly though when this bit is always set, so implement the notify_(dis)concect() callbacks to set this bit whenever a high speed device is connected and to clear it again when the device is disconnected. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 29 Sep 2016
	a44f222 Browse files » usb: imx-us-phy: Convert driver to generic phy support ... The generic phy layer now supports USB phys, so convert the driver over to use it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 29 Sep 2016
	4ed80f0 Browse files » usb: imx-usb-phy: Drop unnecessary read/modify/write ... When writing to the USBPHY_CTRL register read/modify/write is unncessary since we are writing to the associated bit set register anyway. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 29 Sep 2016
	7c9708a Browse files » usb: ehci: forward phy given in registration data to host ... Allow to pass a phy in the registration data and forward it to the usb_host structure. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 29 Sep 2016
	0408cb0 Browse files » usb: Add usb phy to usb host ... Add a struct usb_phy * member to struct usb_host. Also, call usb_phy_notify_connect() / usb_phy_notify_disconnect() when there are connection changes on the root hub. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 29 Sep 2016
2016-09-28	8ac094d Browse files » usb: Use standard debug macro ... Use standard pr_debug instead of homebrew USB_PRINTF Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 28 Sep 2016
2016-09-12	25be412 Browse files » ARM: i.MX drivers: enable i.MX50 where already supported ... The i.MX50 SOC includes one ESDHCv3, three ESDHCv2, one cspi and two ecspi instances which are supported by existing drivers. Signed-off-by: Alexander Kurz <akurz@blala.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Kurz authored on 9 Sep 2016 Sascha Hauer committed on 12 Sep 2016
2016-09-05	b5952e8 Browse files » usb: i.MX chipidea: Enable VBUS regulator when needed ... We should enable VBUS only in host mode, not unconditionally during probe(). Fix that. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 5 Sep 2016
2016-08-29	b82ae64 Browse files » usb: chipidea i.MX: Do not return unnecessary error ... We only allow to setup the host/peripheral role once, when it's already set then we return -EBUSY. Return 0 instead when we set the same role again and only return -EBUSY when we actually try to change the role. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 29 Aug 2016
2016-07-26	4d85cb9 Browse files » include: Move bulk of boot.h to bootm.h ... The majority of the stuff currently in include/boot.h is about bootm code implemented common/bootm.c. To be more consistent move it to a new file include/bootm.h. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 26 Jul 2016
2016-07-07	81a54af Browse files » USB: gadget: composite: avoid possible NULL ptr dereference ... Check if g is valid before trying to dereference it. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 6 Jul 2016 Sascha Hauer committed on 7 Jul 2016
2016-07-06	04f3cde Browse files » usb: ehci: honour timeout value ... usb_control_msg() and usb_bulk_msg() have a timeout parameter. Honour this in the ehci driver instead of using a default timeout. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 6 Jul 2016
2016-05-10	ece204a Browse files » usb: fastboot: Fix oem exec support ... Fixes: b1374a6 usb: fastboot: drop CONFIG_COMMAND_SUPPORT dependency The correct config option to depend on is CONFIG_COMMAND_SUPPORT, not CONFIG_COMMAND. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 10 May 2016
2016-05-09	06f5a7c Browse files » Merge branch 'for-next/ubiformat' Sascha Hauer committed on 9 May 2016
2016-05-09	55aca0a Browse files » Merge branch 'for-next/include-cleanup' Sascha Hauer committed on 9 May 2016
2016-04-26	b1374a6 Browse files » usb: fastboot: drop CONFIG_COMMAND_SUPPORT dependency ... fastboot can run without command support. In this case we cannot execute oem commands. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 26 Apr 2016
2016-04-26	8228f9e Browse files » usb: fastboot: Use C API for ubiformat ... This makes it possible to compile the fastboot gadget without command support. While at it bail out when ubiformat is not compiled in. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 26 Apr 2016
2016-04-19	cb8cf33 Browse files » fix erasing/protecting flashes with unspecified size ... fixes: 81737c1 mtd: Fix erasing of devices >4GiB Several places erased a complete flash partition passing ~0 as count to erase(). With the above commit count to erase was changed from an unsigned type to a signed type, so the (count > f->size - offset) check in erase() no longer triggers and the ~0 count is no longer adjusted to the whole device size. Among other things this results in saveenv failures on NOR flashes. This patch fixes this by introducing an explicit macro for erasing the whole device which is tested for in erase(). All other negative values are rejected. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reported-by: Giorgio <giorgio.nicole@arcor.de> Sascha Hauer committed on 19 Apr 2016