LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

History for barebox / drivers

2017-01-30	db791c7 Browse files » mtd: spi-nor: add support for s25fl208k ... Signed-off-by: Peter Mamonov <pmamonov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Peter Mamonov authored on 26 Jan 2017 Sascha Hauer committed on 30 Jan 2017
2017-01-26	e0d4355 Browse files » ARM i.MX31 clk: add pll_ref_clk and MCU PLL bypass select ... The three MX31 PLL may be clocked from either CKIH or a frequency-multiplied derivate of CKIL generated by the Frequency Pre Multiplier FPM. Add the pll_ref_clk selection infrastructure and support for MCU PLL bypass to support clock switching and boards not clocked CKIH. Signed-off-by: Alexander Kurz <akurz@blala.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Kurz authored on 24 Jan 2017 Sascha Hauer committed on 26 Jan 2017
2017-01-24	23a90fe Browse files » serial: efi: improve input handling ... 0x08 is the scan-code for 'backspace' not 'delete'. 0x17 indicates the start of an escape sequence, such as "[3~" for 'delete'. Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Michael Olbrich authored on 23 Jan 2017 Sascha Hauer committed on 24 Jan 2017
2017-01-20	280c651 Browse files » video: tc358767: add copyright lines ... Add copyright lines for Zodiac who paid for driver development. Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Gusakov authored on 17 Jan 2017 Sascha Hauer committed on 20 Jan 2017
	25342f9 Browse files » regulator: Add pfuze driver ... This is not yet a regulator driver, only the register map is exported as /dev/pfuze* so the registers can be accessed for debugging purposes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 20 Jan 2017
	99a4644 Browse files » pinmmux: i.MX: add pin mux support for i.MX7 ... Signed-off-by Juergen Borleis <jbe@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Borleis authored on 6 Dec 2016 Sascha Hauer committed on 20 Jan 2017
	043bc98 Browse files » watchdog: i.MX: Fix internal/external reset ... The watchdog can either reset only the SoC or assert the WDOG_B output signal instead. On some boards it's necessary to use the external WDOG_B output to make sure that external devices like the PMIC are also properly resetted. This has been fixed in the Linux driver which honours a fsl,ext-reset-output device tree property to select between both ways. Do the same in the barebox driver. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 20 Jan 2017
	aadb845 Browse files » watchdog: i.MX: add soc_reset operation ... On i.MX21 watchdog type the reset operation is really different from the watchdog enable/set timeout operation, so create an extra callback for this instead of folding both things together. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 20 Jan 2017
2017-01-19	626408b Browse files » serial: i.MX: add i.MX7 support ... Signed-off-by Juergen Borleis <jbe@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Borleis authored on 6 Dec 2016 Sascha Hauer committed on 19 Jan 2017
	f5af044 Browse files » clk: i.MX7: Add missing USB clocks ... The USB clocks are missing in the Kernel clock code. Add them here. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 19 Jan 2017
	fdd14bd Browse files » clk: i.MX: Add clock support for i.MX7 ... Signed-off-by Juergen Borleis <jbe@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Borleis authored on 6 Dec 2016 Sascha Hauer committed on 19 Jan 2017
	9a89ed9 Browse files » clk: imx: Add clk-cpu support ... Taken from the kernel as of 4.10-rc3. Needed for i.MX7 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 19 Jan 2017
	0ada0c0 Browse files » clk: i.MX: pllv3: Add support for the i.MX7 enet pll ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 19 Jan 2017
	cf6b508 Browse files » mci: imx-esdhci: remove wrong write protection test ... Testing for the write protection bit to determine if a card is write protected or not is wrong. The bit may have the wrong value for permanently plugged cards (eMMC) or for boards using a GPIO for write protection detection. Since the core will test for write protection before actually calling into the driver this test can just be removed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 19 Jan 2017
	6e9a87b Browse files » mci: Allow to partition eMMC boot partitions ... So far the eMMC boot partitions cannot be partitioned from the device tree. Since they are often 4MiB in size they are big enough to hold a barebox image and the environment. Add partition parsing to the boot partitions to allow this usecase. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 19 Jan 2017
	32da909 Browse files » of: partitions: force "partitions" subnode ... The binding states that a subnode containing partition subnodes should have the name "partitions". Enforce this so that we do not parse nodes with other names which may have partition descriptions for other disks. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 19 Jan 2017
	1b3fde3 Browse files » phy: usb-nop-xceiv: Add clock support ... As stated in the FIXME comment this is needed. Get and enable a "main_clk" just like the kernel does. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 19 Jan 2017
	bbe0df9 Browse files » usb: imx: Add clock support ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 19 Jan 2017
	2eb99b6 Browse files » usb: imx: Add usbmisc support for i.MX7 ... Taken directly from Linux-4.10-rc3 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 19 Jan 2017
	fc10539 Browse files » usb: imx: Make usb-misc multi instance safe ... i.MX7 has two usbmisc devices, so we cannot use global instance variables anymore. Create a driver private data struct for it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 19 Jan 2017
	1bcd048 Browse files » serial: i.MX: Enable clock ... For architectures which do not enable all clocks during initialization. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 19 Jan 2017
	61c6c24 Browse files » mci: imx-esdhc: Enable clock ... For architectures which do not enable all clocks during initialization. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 19 Jan 2017
	27940de Browse files » i2c: i.MX: Enable clock ... For architectures which do not enable all clocks during initialization. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 19 Jan 2017
2017-01-18	55d2952 Browse files » ata: ide-sff: don't call free for ide_port in error path ... The ide_port is provided by the caller so it's not in the responsibility of this function to free this memory in case of error. Actually all callers do the free themselves, too. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Uwe Kleine-König authored on 19 Dec 2016 Sascha Hauer committed on 18 Jan 2017
2017-01-17	3cfc8bc Browse files » usb: gadget: disable AT91 driver on SAMA5D4 ... This architecture is missing the right defines for the system peripherals, that are needed for this driver to build successfully. Disable it for now until someone with a clue about this architecture can fill in the gap. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 16 Jan 2017 Sascha Hauer committed on 17 Jan 2017
2017-01-17	ed6620e Browse files » bus: mvebu-mbus: fixup correct device tree ... When booting with an external device tree this external tree must be adapted, not the internal tree again. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Uwe Kleine-König authored on 16 Jan 2017 Sascha Hauer committed on 17 Jan 2017
2017-01-13	90abfd3 Browse files » of_path: only handle no driver for device if it is on a bus ... This fixes a regression in __of_find_path() for flash devices created by the cadence-quadspi driver, which do not have 'dev->driver' set. Such devices do not have 'dev->bus' set either, so we can use that to qualify the existing test. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ian Abbott authored on 12 Jan 2017 Sascha Hauer committed on 13 Jan 2017
	2a2ee7a Browse files » net/phy: marvell: add support for 88e1510 to marvell phy driver ... This is mostly copied verbatim from the Linux driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Uwe Kleine-König authored on 11 Jan 2017 Sascha Hauer committed on 13 Jan 2017
	ebfd737 Browse files » net/phy: marvell: improve config_aneg for 88E1121R and 88E1318S ... This is taken from the Linux driver Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Uwe Kleine-König authored on 11 Jan 2017 Sascha Hauer committed on 13 Jan 2017
	3fd488a Browse files » net/phy: marvell: align definition of MII_88E1121_PHY_MSCR to Linux driver ... Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Uwe Kleine-König authored on 11 Jan 2017 Sascha Hauer committed on 13 Jan 2017