LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

History for barebox / Documentation / devicetree

2016-11-03	63cc1eb Browse files » docs: state: make string variable type clearer ... Only fixed length strings are supported. Make the wording clearer. Signed-off-by: Stefan Lengfeld <s.lengfeld@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Stefan Lengfeld authored on 2 Nov 2016 Sascha Hauer committed on 3 Nov 2016
2016-07-08	46f26c0 Browse files » docs: Add/Update state documentation ... Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Markus Pargmann authored on 6 Jul 2016 Sascha Hauer committed on 8 Jul 2016
2016-05-30	24fcf5f Browse files » rtc: ds1307: Add support for configuring external clock pin ... The DS1307 has a square wave output pin, which can be used to output a clock signal from the DS1307. Additionally, the DS1308 supports configuring this pin as an input from an external clock source to which it should sync itself. Add support with OF device tree properties to configure these settings. Supported features are using the clock pin as an output, an input, the rate of the pin, and if it should be enabled on battery backup power. The driver does not check that the selected features are supported by the clock chip being used. It is the designer's responsibility to create a valid device tree node; the bootloader does not attempt to be a device tree validator. Signed-off-by: Trent Piepho <tpiepho@kymetacorp.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Trent Piepho authored on 19 May 2016 Sascha Hauer committed on 30 May 2016
2016-02-10	a644c9f Browse files » Documentation: m25p80: include in documentation ... Fix this warning: checking consistency... [...]Documentation/devicetree/bindings/mtd/m25p80.rst:: WARNING: document isn't included in any toctree by including the document. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Robert Schwebel authored on 9 Feb 2016 Sascha Hauer committed on 10 Feb 2016
2016-02-04	a6f73ec Browse files » docs: fix typos ... Signed-off-by: Ulrich Ölmann <u.oelmann@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ulrich Ölmann authored on 4 Feb 2016 Sascha Hauer committed on 4 Feb 2016
2016-01-08	3a0e9b4 Browse files » environment: Support env from file in a file-system via device tree ... Current barebox,environment node only allows specifying a raw device or partition to load an environment from. Some boards, like OMAP and SoCFPGA, instead want to use a file located in a FAT filesystem. Extend the device tree bindings with a new property 'file-path' that will trigger this behavior. This allows any board using this driver to get the env from a file or from a raw device, instead of each machine type being either raw device only or file only. Signed-off-by: Trent Piepho <tpiepho@kymetacorp.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Trent Piepho authored on 16 Dec 2015 Sascha Hauer committed on 8 Jan 2016
2016-01-08	3cff894 Browse files » state: implement signed int support ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 8 Jan 2016
2015-11-27	34cda8c Browse files » state: backend_raw: add hmac support ... This patch adds hmac support to the raw backend. With this patch, modifications of the header or data of a state partition can be detected, as the hmac woudln't match anymore. The hmac relies on a shared secret, which is requested from the keystore, with keystore_get_secret() using the name of the state partition as the "name" of the secret. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Marc Kleine-Budde authored on 25 Oct 2015 Sascha Hauer committed on 27 Nov 2015
2015-09-01	e582374 Browse files » Merge branch 'for-next/of_path' Sascha Hauer committed on 1 Sep 2015
2015-09-01	35eb065 Browse files » of_path: Allow pointing directly to the partition ... We could only point to partitions in the device tree by using &norflash, "partname:barebox-environment". Allow to point to the partition directly without having to parse the partition labels. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 1 Sep 2015
2015-08-26	3e1adbf Browse files » mtd: m25p80: make it possible to use large blocks if desired ... Some SPI NOR flashes support 4K erase blocks. 4K erase blocks do not work with UBIFS which needs a minimum erase block size of 15360 bytes. Also bigger sectors are faster to erase. This patch adds a device tree option to use the bigger blocks instead of the default 4K blocks. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Sascha Hauer committed on 26 Aug 2015
2015-06-26	9116aba Browse files » state: add support for fixed length strings ... Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Marc Kleine-Budde authored on 17 Jun 2015 Sascha Hauer committed on 26 Jun 2015
2015-06-17	a3a17df Browse files » state: Documentation: fix dts code example ... It's "uint32" not "u32" and we use integers for the "enum32" defaults. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Marc Kleine-Budde authored on 15 Jun 2015 Sascha Hauer committed on 17 Jun 2015
	df1e1f4 Browse files » state: Documentation: the backend properties are not optional (anymore) ... Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Marc Kleine-Budde authored on 15 Jun 2015 Sascha Hauer committed on 17 Jun 2015
	f506777 Browse files » state: Documentation: add newly implemented "uint8" types. ... Cc: Jan Luebbe <jluebbe@debian.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Marc Kleine-Budde authored on 15 Jun 2015 Sascha Hauer committed on 17 Jun 2015
2015-05-15	d600c8d Browse files » state: documentation: add anchor so that state can be referenced later ... Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Marc Kleine-Budde authored on 6 May 2015 Sascha Hauer committed on 15 May 2015
2015-03-12	1487e6b Browse files » state: add framework for persistent state handling ... This patch adds a framework to describe, access, store and restore a set of variables. A state variable set can be fully described in a devicetree node. This node could be part of the regular devicetree blob or it could be an extra devicetree solely for the state. The state variable set contains variables of different types and a place to store the variable set. For more information see: Documentation/devicetree/bindings/barebox/barebox,state.rst Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 12 Mar 2015
2014-09-09	d0a0e80 Browse files » DT: Add binding for Altera SOCFPGA FPGA Manager ... Altera SOCFPGA have a FPGA Manager, that manages and monitors the FPGA portion of the SoC. Cc: devicetree@vger.kernel.org Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Steffen Trumtrar authored on 8 Sep 2014 Sascha Hauer committed on 9 Sep 2014
2014-09-09	8c7241c Browse files » DT: Add binding for Altera FPGAs in passive-serial mode ... Altera FPGAs that are programmed via SPI use the passive serial protocol. Add a simple binding that describes the setup for this usecase. Cc: devicetree@vger.kernel.org Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 9 Sep 2014
2014-07-29	03a2269 Browse files » led: try to get LED's label from the 'label' property ... Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 29 Jul 2014 Sascha Hauer committed on 29 Jul 2014
2014-07-02	f0333dd Browse files » Documentation: device tree bindings. ... Adjusted Sphinx markup for devicetree bindings pages. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Robert P. J. Day authored on 30 Jun 2014 Sascha Hauer committed on 2 Jul 2014
2014-06-27	cbd9947 Browse files » doc: start (almost) all headlines with a capital ... Signed-off-by: Holger Schurig <holgerschurig@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Holger Schurig authored on 27 Jun 2014 Sascha Hauer committed on 27 Jun 2014
2014-06-26	3fef396 Browse files » Documentation: Add new sphinxs docs ... This is a rewrite of the Documentation in reStructuredText format using Sphinx as build system, see http://sphinx-doc.org/. The documentation is built into static html pages with 'make docs'. The pages can be found under Documentation/html after building. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 26 Jun 2014
2014-06-26	7e65163 Browse files » Documentation: remove devicetree docs ... Remove the barebox devicetree documentation. It will be replaced with sphinx based documentation later. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 26 Jun 2014
2014-04-08	6ca980c Browse files » Documentation: Update binding doc for i.MX IIM ... Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Shiyan authored on 7 Apr 2014 Sascha Hauer committed on 8 Apr 2014
2013-08-05	fbf082b Browse files » Merge branch 'for-next/of' ... Conflicts: arch/arm/boards/freescale-mx53-loco/board.c drivers/of/Makefile Sascha Hauer committed on 5 Aug 2013
2013-07-22	8cd342f Browse files » ARM: i.MX6: Add ocotp driver ... The only functionality at the moment is to register a MAC Address for an ethernet device. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 22 Jul 2013
2013-07-18	874f318 Browse files » Add configurability via devicetree ... This adds the possibility to configure the place for the environment from the devicetree and to partition devices from the devicetree. Configuration has the general form of devices with a regular compatible property. This allows to later add additional drivers or drivers with different behaviour (for example to add support for redundant environment). The configuration is all in the /chosen/barebox/ hierarchy of the devicetree. This separates the configuration from the hardware description. Also it makes it possible to store the configuration in a completely separate devicetree (or devicetree overlay). For the same reason all configuration is done using nodepathes rather than phandles. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 18 Jul 2013
2013-07-10	98df44e Browse files » led: gpio: Add trigger support ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 10 Jul 2013
2013-05-23	4699fa4 Browse files » ARM: i.MX: iim: Add devicetree probe support ... Only adds the dt ids. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 23 May 2013