ARM: mvebu: only build kwbootimage support if BOOTM is enabled ...

As this is the bootm image handler implementation for the kwbootimage
it is of no use if BOOTM is missing and fails to link.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: add AFLAGS for secure monitor files ...

The instructions used in those files are only supported on ARMv7.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: dts: i.MX7 WaRP7: remove wdog1 pinctrl workaround ...

The wdog1 pinctrl got fixed with linux upstream commit 213e51ca8df1 ("ARM:
dts: imx7: Add "LPSR" to LPSR iomux pin names").
Remove the old workaround, since it triggers a build error.

Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX7: Kconfig: ARCH_IMX7 selects PINCTRL_IMX_IOMUX_V3 ...

fsl,imx7d-iomuxc is provided by selecting PINCTRL_IMX_IOMUX_V3. Select it
since a system without it will not be very usefull.

Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arm: baltos: define baltos_sram_init() return type as void ...

As stated in the routine's description this routine is to return void,
hence fix its declaration to remove compiler warning.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/rpi'

Merge branch 'for-next/mvebu'

Merge branch 'for-next/imx'

Merge branch 'for-next/at91'

clocksource: at91: Move to 'drivers/clocksource' ...

Move PIT driver code to 'drivers/clocsource' and accomodate it by
adjusting Kconfig variables. Rename the file to 'timer-atmel-pit.c' to
re-align the driver with code in Linux kernel.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

at91: Fix bug/typo in debug_ll.h ...

Correct "COFNIG" to "CONFIG".

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: imx233-olinuxino: add CONFIG_CONSOLE_ACTIVATE_ALL ...

if not set, barebox will use first console by default.
On this board first console is KEYBOARD_GPIO, so we will end
in unusable state.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

scripts: imx/mxs remove mxs-usb-loader ...

... and use imx-usb-loader instead

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: execute DMB before trying to flush cache ...

The CPU write buffer needs to be coherent with the cache, otherwise
we might flush stale entries with the actual data stuck in the cache.

This is really important on newer CPU core with bigger write buffers.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: correctly identify ARMv6 K/Z ...

The ARMv6 K/Z derivatives have a v7 compatible MMU, but all other parts
(including the cache handling) is still at v6. As we don't make use of
the more advanced features of the v7 MMU in Barebox, it's okay to just
override this to properly identify the CPU as ARMv6.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: align exception vectors to 32 byte ...

On ARMv7 the exception vectors inside the barebox binary are used directly
by remapping the vectors base through the VBAR register. While VBAR allows
to remap the exception vectors freely, it still imposes a minimum alignment
of 32 byte, as the lower bits are treated as the exception vector offset.
Enforce this alignment inside the barebox binary.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mvebu: netgear-rn2120: make use of mvebu_get_initial_int_reg_base ...

This is necessary to make second stage booting work when the register
window is already moved.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

kwbimage_v1: add support to boot a mvebu image ...

This just starts the main image of the mvebu image assuming that the
header images just setup the RAM. The position of the internal register
window is provided in the header as introduced in the previous commit.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

mvebu: get initial position of register window from image header ...

A problem when using 2nd stage booting on mvebu is that the first bootloader
already switched the register window location from 0xd0000000 to
0xf1000000 by writing to 0xd0000080. When the second bootloader also
tries to do this switch it writes to the wrong location resulting in an
exception and so a boot failure.

For this reason the base address of the register window is passed in the
barebox header and picked up from there by early code. In a further
patch bootm is taught to put the actual position of the window there for
the second bootloader to finally make second stage booting work.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

mvebu: rn2120: Make available all RAM ...

binary.0 sets up all RAM but the address decoding isn't adapted accordingly
which makes barebox assume that there are only 512 MiB of RAM on a single
bank instead of two banks with 1 GiB each.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

mvebu: kirkwood: simplify soc init code flow ...

Similar to the two previous commits, this gets rid of a of-fixup which
is strange because the soc init stuff is rerun then when a new dt for
booting into Linux is loaded.

The initcall must be postponed to post-core to ensure
of_machine_is_compatible is working correctly.

The call to mvebu_mbus_add_range is moved to drivers/bus/mvebu-mbus.c to
ensure it's registered early enough.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mvebu: dove: simplify soc init code flow ...

Similar to the previous commit, this gets rid of a of-fixup which is
strange because the soc init stuff is rerun then when a new dt for
booting into Linux is loaded.

The initcall must be postponed to post-core to ensure
of_machine_is_compatible is working correctly.

The call to mvebu_mbus_add_range is moved to drivers/bus/mvebu-mbus.c to
ensure it's registered early enough.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mvebu: armada-370-xp: simplify soc init code flow ...

This gets rid of a of-fixup which is strange because the soc init stuff
is rerun then when a new dt for booting into Linux is loaded.

The initcall must be postponed to post-core to ensure
of_machine_is_compatible is working correctly.

The call to mvebu_mbus_add_range is moved to drivers/bus/mvebu-mbus.c to
ensure it's registered early enough.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: rpi: switch to DT probe and multi-image build ...

This commit switches the RaspberryPi arch over to probe Barebox
from the builtin DT and enables multi-image builds.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: rpi: move debug UART base selection to Kconfig ...

To let the user select the right base, when building multi-image.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: rpi: always build relocatable image ...

Makes more space available for the malloc area and will allow
to switch to multi-image later on.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: rpi: convert watchdog/reset to regular driver ...

This way it can be probed from DT later on.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: rpi: convert mailbox interface to regular driver ...

In prepareation for devicetree probing.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: rpi: move model detection before console init ...

This way we can print the correct model in the Barebox banner.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: rpi: move model initialisation to rpi-common ...

The Raspberry PIs use different versions schemes for the older and newer
variants. The decoding arrays for these schemes were split up in rpi.c
and rpi2.c. This is not required, as the appropriate versioning scheme
can be determined programmatically.

Signed-off-by: Enrico Joerns <ejo@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>