mci-bcm2835: enable devicetree probing ...

Signed-off-by: Enrico Joerns <ejo@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

i.MX: esdhc: fix imx-esdhc driver for non-OF boards ...

Commit 39f7a7ee8b68 ("i.MX: esdhc: Do not rely on CPU type for quirks")
made imx-esdhc dependent on OF and broke probing for all non-OF boards.
Since newer platforms like mx6 and vf610 are restricted to OF, the non-OF
probing only needs to distinguish mx5 vs earlier SoC.

Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci: imx-esdhci: remove wrong write protection test ...

Testing for the write protection bit to determine if a card is write
protected or not is wrong. The bit may have the wrong value for
permanently plugged cards (eMMC) or for boards using a GPIO for
write protection detection.
Since the core will test for write protection before actually
calling into the driver this test can just be removed.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci: Allow to partition eMMC boot partitions ...

So far the eMMC boot partitions cannot be partitioned from the
device tree. Since they are often 4MiB in size they are big enough
to hold a barebox image and the environment. Add partition parsing
to the boot partitions to allow this usecase.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci: imx-esdhc: Enable clock ...

For architectures which do not enable all clocks during initialization.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

i.MX: esdhc: Enable host->clk during initialization ...

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/vybrid'

Merge branch 'for-next/misc'

i.MX: esdhc: Request "per" clock explicitly ...

Calling clk_get() with NULL as the second argument will give us "ipg"
clock as a result. The actual clock feeding into the peripheral is "per"
and, depending on the SoC, "ipg" and "per" may be separated by a clock
divider, so querying "ipg"'s rate may not result in rate that does not
represent the actual peripheral clock rate.

Change the code to request "per" as our peripheral clock to avoid
aforementioned problem.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

i.MX: esdhc: Do not rely on CPU type for quirks ...

CPU type is not a reliable indicator of the underlying type of IP core
used, since there's no 1:1 mapping between the two. As example of one
such violation consider Vybrid SoC which contains IP block from i.MX53.

Instead port feature flags from corresponding Linux kernel driver and
use the ones that are relevant.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci: omap: Add devicetree options parsing by MCI core. ...

This patch adds a callback to parsing devicetree options for MMC:
bus-width, etc..

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci: imx: Add imx6sx compatible ...

To let the driver probe on i.MX6SX and i.MX6UL.

Signed-off-by: Christian Hemp <c.hemp@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/rockchip'

Merge branch 'for-next/misc'

ARM: i.MX drivers: enable i.MX50 where already supported ...

The i.MX50 SOC includes one ESDHCv3, three ESDHCv2, one cspi and
two ecspi instances which are supported by existing drivers.

Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci: mmci: Fix read FIFO handling ...

According to the Linux kernel and the qemu code, the MMCIFIFOCNT contains
the remaining number of words to read, excluding those that are already in
the FIFO. So the current number of bytes in the FIFO is
host_remain - (readl(base + MMCIFIFOCNT) << 2).

Also writing to MMCIDATACTRL will reset the read counter. As a result,
MCI_DATABLOCKEND is never set and read_bytes() waits forever.

With this change, SD-Card support on qemu vexpress works correctly.

Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci: dw_mmc: Add RK3288 compatible string ...

The SDHC used in the RK2928 and RK3288 are compatible with each other.
Add a compatible string for RK3288's SDHC.

Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Revert "mci: imx-esdhc: Remove excess function" ...

This reverts commit 8a68969.

With this patch it's no longer possible to call detect on the
physical device which is necessary for example to make environment
on MMC work. Unlike the commit message for 8a6896971d claims
mci_detect_card() is not called from mci_register().

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci: imx-esdhc: Remove excess function ...

Function detect() is defined in the MCI core and mci_detect_card() is
already called form mci_register(). Remove excess fuction.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci: core: Do not fail if vmmc regulator fail ...

The vmmc regulator can be an usupported device for barebox,
the specific MFD regulator type, for example. Just lets think is all ok.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci: imx: Add devicetree options parsing by MCI core. ...

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci: imx: Use mci_register() return value for driver probe. ...

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/misc'

mci: Fix version numbers again ...

The SD and eMMC version numbers are a pain to print and sort, since
they are inconsistent in if a two digit minor version shdoulde be
treated as a single number or as minor and micro version numbers.

This allows version 1.10 and 4.5 and 4.41, where 41 is less than 5.

Signed-off-by: Trent Piepho <tpiepho@kymetacorp.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MCI: imx-esdhc: Allow to use 1-bit bus width in board files ...

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/misc'

Merge branch 'for-next/include-cleanup'

mci: imx-esdhc: implement reset quirks for i.MX6 DualLite/Solo ...

First of all the reset values of MMC interfaces are differently between
Quad and DualLite/Solo SoM.

                Register VEND_SPEC2(0xC8)
    Quad:       0x0
    DualLite:   0x00000006
    default:    0x00000006    (from i.MX6 Reference Manual)

Furthermore the ROM Code of Quad and DualLite uses the MMC interfaces
differently when it loads the bootloader from that device:

                Register DLL_CTRL(0x60)  Bit 25 FBCLK_SEL (0x48)
    Quad:       0x0                      0
    DualLite:   0x01000021               1

Since the linux kernel and barebox driver doesn't reset all registers,
the MMC interface is in an inconsistent state, which leads to boot
failures for some eMMC devices on the i.MX6 DualLite SoM. The errors
look like:

    mmcblk3: error -110 sending stop command, original cmd response 0x900, card status 0x400900
    mmcblk3: error -84 transferring data, sector 24578, nr 2, cmd response 0x900, card status 0x0
    mmcblk3: retrying using single block read
    mmcblk3: error -84 transferring data, sector 24578, nr 2, cmd response 0x900, card status 0x0
    blk_update_request: I/O error, dev mmcblk3, sector 24578

It's sufficient to reset register DLL_CTRL and bit FBCLK_SEL. Register
VEND_SPEC2 has no effect.

Signed-off-by: Stefan Christ <s.christ@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

string: Fix (v)asprintf prototypes ...

Our asprintf and vasprintf have different prototypes than the glibc
functions. This causes trouble when we want to share barebox code
with userspace code. Change the prototypes for (v)asprintf to match
the glibc prototypes. Since the current (v)asprintf are convenient
to use change the existing functions to b(v)asprintf.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci: mxs: add support for dt aliases to name devices ...

While changing there, reformat the comment and use ; instead of , after
the previous call.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>