LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

History for barebox / drivers

2017-03-09	d6ef702 Browse files » usb: imx: role_registered contains role ... role_registered contains the role, it's not a bool indicating that a role is registered. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 9 Mar 2017
	0482159 Browse files » drivers: clk: clk-imx6.c: Don't gate LDB and IPUs ... Depending on CONFIG_DRIVER_VIDEO_IMX_IPUV3 to decide whether to gate IPU clocks or not is rather fragile. Any inadvertent dependency on the IPU (like setting the NoC AQoS registers for i.MX6QP) will result in a freeze if CONFIG_DRIVER_VIDEO_IMX_IPUV3 is disabled. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> David Jander authored on 3 Mar 2017 Sascha Hauer committed on 9 Mar 2017
	a8b41f2 Browse files » clk: Make COMMON_CLK_OF_PROVIDER depend on OFTREE ... Make COMMON_CLK_OF_PROVIDER depend on OFTREE, this way checking for: defined(CONFIG_OFTREE) && defined(CONFIG_COMMON_CLK_OF_PROVIDER) can be simplified to just: defined(CONFIG_COMMON_CLK_OF_PROVIDER) Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 8 Mar 2017 Sascha Hauer committed on 9 Mar 2017
	b5ea2c6 Browse files » clk: Port two helper functions from Linux ... Port of_clk_get_parent_count() and of_clk_parent_fill() from Linux. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 8 Mar 2017 Sascha Hauer committed on 9 Mar 2017
	da1752b Browse files » pinctrl: at91: Implement .get_direction hook ... Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 8 Mar 2017 Sascha Hauer committed on 9 Mar 2017
	15426d5 Browse files » pinctrl: at91: Fix a bug in at91_pinctrl_set_state() ... Pin number, as specified in OF pinumx entries, is relative to each bank start, whereas both at91_mux_pin() and at91_pinctrl_set_conf() asssume absolute pin numbering, so we need to take into account each bank's pin base and convert pin number appropriately. Failing to do so results in any pinmux configuration being applied to pins in bank A. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 8 Mar 2017 Sascha Hauer committed on 9 Mar 2017
	7d9679a Browse files » pinctrl: at91: Fix a bug in at91_pinctrl_set_conf() ... Pin_to_controller returns struct at91_gpio_chip, whereas at91_mux_* functions expect void __iomem * pointing to controller register window. Fix the code to do appropriate conversion between the two. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 8 Mar 2017 Sascha Hauer committed on 9 Mar 2017
	943a9ee Browse files » regmap: Implement syscon_node_to_regmap() ... Implement syscon_node_to_regmap() to simplify porting kernel code. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 8 Mar 2017 Sascha Hauer committed on 9 Mar 2017
	c09bec9 Browse files » efi: add veriable to report secure boot support and status ... Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 3 Mar 2017 Sascha Hauer committed on 9 Mar 2017
	637d6df Browse files » efi: clocksoure: add EFI event timer ... with this we can be hw generic If the EFI implement timestamp protocol we could use instead of event but even EDK2 Never Ever compile it for any target. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 3 Mar 2017 Sascha Hauer committed on 9 Mar 2017
	da11bd9 Browse files » efi: move x86 clocksource to device/driver ... so we can dynamicly register the device As we may need to use HW IP for clocksource. As on EFI we could use Timestamp GUID if present (Not often the case as it's not even enabled by default on any Target on EDK II not even OVMF) Or if we choose we could use a Simulated Timestamp driver that work on Event (Add Later) Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 3 Mar 2017 Sascha Hauer committed on 9 Mar 2017
	92c1033 Browse files » efi: move x86 clocksource init at core initcall level ... so we can use device/driver model Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 3 Mar 2017 Sascha Hauer committed on 9 Mar 2017
	5f03ddd Browse files » efi: add serial driver support ... So now we can stop to use the efi-stdio as this driver print on the Framebuffer and the serial at the same time. This is specially usefull if we want to use the framebuffer via efi-gop for something else. Do not forget to disable the efi-stdio device before enabling the console otherwise you will get double printing. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 6 Mar 2017 Sascha Hauer committed on 9 Mar 2017
	6518b21 Browse files » video: add EFI Graphics Output Protocol support ... Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 6 Mar 2017 Sascha Hauer committed on 9 Mar 2017
	2f13691 Browse files » efi: add efi handle dump command ... so we can inspect easly what is supported by the EFI implementation we running on Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 19 Feb 2017 Sascha Hauer committed on 9 Mar 2017
	563b43d Browse files » efi: add minor and major to the bus and display it at boot ... Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 19 Feb 2017 Sascha Hauer committed on 9 Mar 2017
	83c9ce1 Browse files » efi: bus: add firmware vendor and resision and tables info ... This alllow us to known where we boot from Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 15 Feb 2017 Sascha Hauer committed on 9 Mar 2017
2017-03-06	ffdb340 Browse files » video: sdl fix typo ... Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 6 Mar 2017 Sascha Hauer committed on 6 Mar 2017
	db5a5e3 Browse files » dma: apbh_dma: add missing array termination ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 6 Mar 2017
	e7b1f56 Browse files » clk: imx: clk-imx6ul: Use anatop_base pointer for consistency ... The anatop_base pointer was unused, but instead of removing it, assign and use it for readability like clk-imx6 and clk-imx6sx do. Signed-off-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Robin van der Gracht authored on 3 Mar 2017 Sascha Hauer committed on 6 Mar 2017
	52e9a84 Browse files » video: add support for Solomon SSD1307 OLED controller family ... It was ported from linux v4.10. Like the kernel driver only communication via I2C is supported. It has only been tested with a SSD1306 and a 96x16 OLED display: &i2c0 { status = "okay"; ssd1306: oled@3c { compatible = "solomon,ssd1306fb-i2c"; reg = <0x3c>; reset-gpios = <&gpio1 1 0>; solomon,height = <16>; solomon,width = <96>; solomon,page-offset = <0>; solomon,com-invdir; solomon,com-seq; }; Signed-off-by: Bastian Stender <bst@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Bastian Stender authored on 28 Feb 2017 Sascha Hauer committed on 6 Mar 2017
2017-03-03	da2ec36 Browse files » clk: imx: clk-imx6ul: Fixed conditional for enabling USB phy clocks ... Signed-off-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Robin van der Gracht authored on 3 Mar 2017 Sascha Hauer committed on 3 Mar 2017
2017-03-02	836b99c Browse files » i2c: mv64xxx: simplify mv64xxx_i2c_wait_for_completion ... Two nested while loops are not necessary here, so integrate the read, i2c_fsm and i2c_do_action calls into mv64xxx_i2c_wait_for_completion() and remove the obsolete interrupt remains. Signed-off-by: Bastian Stender <bst@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Bastian Stender authored on 23 Feb 2017 Sascha Hauer committed on 2 Mar 2017
	8d38b52 Browse files » i2c: mv64xxx: add software delays ... As stated in Marvell's Functional Specifications in MV-S107021-U0 Rev. A on page 420 ff. software delays are needed. "SW delay represent a delay of at least 2 internal clock cycles". These delays are hereby implemented. The original kernel driver compensates the needed software delays with the time the interrupts take. Signed-off-by: Bastian Stender <bst@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Bastian Stender authored on 23 Feb 2017 Sascha Hauer committed on 2 Mar 2017
	59cce42 Browse files » mvebu: kirkwood: simplify soc init code flow ... Similar to the two previous commits, this gets rid of a of-fixup which is strange because the soc init stuff is rerun then when a new dt for booting into Linux is loaded. The initcall must be postponed to post-core to ensure of_machine_is_compatible is working correctly. The call to mvebu_mbus_add_range is moved to drivers/bus/mvebu-mbus.c to ensure it's registered early enough. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Uwe Kleine-König authored on 25 Feb 2017 Sascha Hauer committed on 2 Mar 2017
	f8d4f62 Browse files » mvebu: dove: simplify soc init code flow ... Similar to the previous commit, this gets rid of a of-fixup which is strange because the soc init stuff is rerun then when a new dt for booting into Linux is loaded. The initcall must be postponed to post-core to ensure of_machine_is_compatible is working correctly. The call to mvebu_mbus_add_range is moved to drivers/bus/mvebu-mbus.c to ensure it's registered early enough. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Uwe Kleine-König authored on 25 Feb 2017 Sascha Hauer committed on 2 Mar 2017
	8a5edc9 Browse files » mvebu: armada-370-xp: simplify soc init code flow ... This gets rid of a of-fixup which is strange because the soc init stuff is rerun then when a new dt for booting into Linux is loaded. The initcall must be postponed to post-core to ensure of_machine_is_compatible is working correctly. The call to mvebu_mbus_add_range is moved to drivers/bus/mvebu-mbus.c to ensure it's registered early enough. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Uwe Kleine-König authored on 25 Feb 2017 Sascha Hauer committed on 2 Mar 2017
	f3acd21 Browse files » ata: new driver to support the internal sata controller on Armada-XP ... Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Uwe Kleine-König authored on 26 Jan 2017 Sascha Hauer committed on 2 Mar 2017
	dc9ef03 Browse files » mci-bcm2835: enable devicetree probing ... Signed-off-by: Enrico Joerns <ejo@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Enrico Joerns authored on 1 Mar 2017 Sascha Hauer committed on 2 Mar 2017
	6b4f5b6 Browse files » clocksource: bcm2835: use clock-frequency property when available ... If the clock frequency is given by a DT property, use this and don't try to use the clock handle. Signed-off-by: Enrico Joerns <ejo@pengutronix.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Enrico Joerns authored on 1 Mar 2017 Sascha Hauer committed on 2 Mar 2017