Merge branch 'for-next/socfpga'

efi: efi: load state from devicetree ...

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

Documentation: socfpga: update sequencer documentation ...

Update the documentation in regard of the sequencer importer.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>

of: of_path: find device via partuuid ...

When a node is compatible to a fixed-partitions, support searching the
corresponding device via the partuuid, if it specified in the device tree.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

docs: mvebu: describe -n more accurately in the sphinx document ...

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/misc'

Merge branch 'for-next/imx'

ARM: i.MX6 Wandboard: add Documentation ...

Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation: improve network boot section ...

Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

firmware: altera-serial: add support for Arria 10 ...

Make FPGA specific settings configurable (padding, spi bits per word,
delays) and add Arria 10 support. The Arria 10 compatible is the same
as in the kernel patch "fpga manager: Add altera-ps-spi driver for
Altera FPGAs" (drivers/fpga/altera-ps-spi.c). The Arria 5 compatible
works unchanged.

This patch was tested with Arria 5 and Arria 10.

Signed-off-by: Bastian Stender <bst@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

docs: move kwboot description to generic mvebu section ...

Expand the generic part about kwboot to the mvebu page and advertise the
parameter -n to make it simpler to boot some machines.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

docs: mvebu can do 2nd stage booting ...

Since commit

	823d08e3e261 ("kwbimage_v1: add support to boot a mvebu image")

barebox can use bootm to load a 2nd barebox image. Update the
documentation accordingly.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation: remote-control: fix typo ...

Correctly reference `--port` instead of	`--baudrate` when explaining
how to specify the port.

Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

docs: render DIP switches as verbatim text ...

Render images of DIP switches as <pre> html tags/verbatim text. This
fixes the sphinx errors:

    Documentation/boards/imx/Element14-WaRP7.rst:25: ERROR: Malformed table.
    Documentation/boards/imx/Element14-WaRP7.rst:36: ERROR: Malformed table.
    Documentation/boards/imx/Element14-WaRP7.rst:47: ERROR: Malformed table.

Signed-off-by: Stefan Lengfeld <contact@stefanchrist.eu>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

docs: add file suffix rst for inclusion in sphinx documentation ...

Signed-off-by: Stefan Lengfeld <contact@stefanchrist.eu>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

docs: fix hiding of chapter from imx.rst ...

The files 'mxs.rst' and 'imx.rst' used the same chapter headline:

    Freescale i.MXs

This confuses sphinx. It does not support having the same headline at
the same level twice and hides the other chapter. Just rename the
chapter heading to avoid that.

And rename the subchapter headline to 'MXS boards' for clarity.

Signed-off-by: Stefan Lengfeld <contact@stefanchrist.eu>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation: provide documentation for RNG interfaces. ...

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

state: Fix example in documentation ...

The backend property must contain a phandle, so use a phandle
in the example.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation: usbgadget: provide autostart notes ...

The usbgadget autostart functionality is already added. It's
time to reflect it in the documentation.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/state'

state: Make an alias mandatory ...

The userspace barebox-state utility gets confused when no alias exists.
Make the alias mandatory, so that people make it right^tm without having
to ask.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

state: Binding: remove @0 from node name ...

The '@0' suffix is for nodes which have a reg property, so
do not use this suffix in the state example node which does
not have a reg property.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

docs: update vendor URL for Vincell-LT ...

Signed-off-by: Ulrich Ölmann <u.oelmann@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX50: Add support for i.MX50 based Amazon Kindle e-book readers ...

The Kindle Model No. D01100 (Kindle Wi-Fi), D01200 (Kindle Touch)
and EY21 (Kindle Paperwhite) are refered as the Kindle 4th and 5th generation.
Those models are based on an i.MX50 SoC and use LPDDR1 or LPDDR2 Memory.

The devices boot in internal boot mode from a build-in eMMC, alternatively
some devices may be set into USB-downloader mode by pressing a specific key
at startup.

Add support for the i.MX50 based Kindle device and make barebox a drop-in
replacement for the factory shipped u-boot image.

Notable features:
- Support for eMMC, USB, UART, I2C, SPI and Keys (except keyboard).
- LPDDR1 and LPDDR2 setup is done via DCD, the same imximage may be used
  for USB-startup and for installation.
- Support for vendor specific ATAGs that are required for the Kindle-System.
- usbserial barebox console access by pressing Select button at startup,
  alternatively full console support on connector J14.

Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

state: Update documentation ...

- explain what buckets are
- rework text about storage backends
- explain redundancy concept

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

state: backend_circular: default to circular storage ...

Default to the new circular storage format which saves erase
cycles. The old format can still be selected with
backend-storage-type = "noncircular".

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

state: Make pointing to the backend using a phandle the only supported method ...

All other methods are broken for some time already: When starting the
kernel the state code rewrites the state node in the device tree and
replaced the "backend" property with a phandle - even when the target
can't be described as a phandle. Since using phandles is the nicest way
to point to the storage device anyway remove the other methods.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

efi: move x86 efi boot support to x86 arch ...

prepare to drop the efi arch as efi boot up is not arch sepecific

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX: Add WaRP7 board support ...

Signed-off-by Juergen Borleis <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX: Add i.MX7 base architecture support ...

Signed-off-by Juergen Borleis <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>