poweroff: Allow to register poweroff handlers ...

Allow to register handlers for poweroff. This allows to have multiple
poweroff implementations in a single binary. The implementation is close
to the restart handlers.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

efi: move startup and payload to common/efi ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

barebox-imd: add dependency on generated/compile.h also for PBL version ...

Barebox-imd is also used in the PBL. As the object file names are different
for the PBL, the explicit dependency on generated/compile.h wasn't there.
This leads to random build failures in parallel builds, or worse the PBL
picking up the old compile.h defines from an earlier build.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

boot: add framework for redundant boot scenarios ...

There are several use cases where a redundant Linux system is needed. The
barebox bootchooser framework provides the building blocks to model different
use cases without the need to start from the scratch over and over again.

The bootchooser works on abstract boot targets, each with a set of properties
and implements an algorithm which selects the highest priority target to boot.

See the documentation contained in this patch for more information.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

boot: Move code to common/ ...

Normally code in commands/ shall only do the option parsing whereas the
functionality shall be in common/ to make the code usable from C aswell.
Do this in the boot code aswell, move it to common/boot.c and add the
function prototypes to include/boot.h

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

state: Refactor state framework ...

The state framework grew organically over the time. Unfortunately the
architecture and abstractions disappeared during this period.

This patch refactors the framework to recreate the abstractions. The
main focus was the backend with its storage. The main use-case was to
offer better NAND support with less erase cycles and interchangeable
data formats (dtb,raw).

The general architecture now has a backend which consists of a data
format and storage. The storage consists of multiple storage buckets
each holding exactly one copy of the state data. A data format describes
a data serialization for the state framework. This can be either dtb or
raw. A storage bucket is a storage location which is used to store any
data. There is a (new) circular type which writes changes behind the
last written data and therefore reduces the number of erases. The other
type is a direct bucket which writes directly to a storage offset for
all non-erase storage.

Furthermore this patch splits up all classes into different files in a
subdirectory.

This is currently all in one patch as I can't see a good way to split
the changes up without having a non-working state framework in between.

The following diagram shows the new architecture roughly:

           .----------.
           |  state   |
           '----------'
                 |
                 |
                 v
  .----------------------------.
  |       state_backend        |
  |----------------------------|
  | + state_load(*state);      |
  | + state_save(*state);      |
  | + state_backend_init(...); |
  |                            |
  |                            |
  '----------------------------'
    |            |                   The format describes
    |            |                   how the state data
    |            '------------->     is serialized
    |   .--------------------------------------------.
    |   |      state_backend_format <INTERFACE>      |
    |   |--------------------------------------------|
    |   | + verify(*format, magic, *buf, len);       |
    |   | + pack(*format, *state, **buf, len);       |
    |   | + unpack(*format, *state, *buf, len);      |
    |   | + get_packed_len(*format, *state);         |
    |   | + free(*format);                           |
    |   '--------------------------------------------'
    |              ^                      ^
    |              *                      *
    |              *                      *
    |   .--------------------. .--------------------.
    |   | backend_format_dtb | | backend_format_raw |
    |   '--------------------' '--------------------'
    |
    |
    |
    v
.----------------------------------------------------------.
|                  state_backend_storage                   |
|----------------------------------------------------------|
| + init(...);                                             |
| + free(*storage);                                        |
| + read(*storage, *format, magic, **buf, *len, len_hint); |
| + write(*storage, *buf, len);                            |
| + restore_consistency(*storage, *buf, len);              |
'----------------------------------------------------------'
                              |
     The backend storage is responsible to manage multiple
     data copies and distribute them onto several buckets.
     Read data is verified against the given format to
     ensure that the read data is correct.
                              |
                              |
                              |
                              |
                              |
                              v
        .------------------------------------------.
        | state_backend_storage_bucket <INTERFACE> |
        |------------------------------------------|
        | + init(*bucket);                         |
        | + write(*bucket, *buf, len);             |
        | + read(*bucket, **buf, len_hint);        |
        | + free(*bucket);                         |
        '------------------------------------------'
                      ^     ^      ^
                     *      *       *
                    *       *        *
 A storage bucket represents*exactly one data copy at one
 data location. A circular b*cket writes any new data to
 the end of the bucket (for *educed erases on NAND). A
 direct bucket directly writ*s at one location.
               *            *             *
              *             *              *
             *              *               *
 .-----------------------.  *  .-------------------------.
 | backend_bucket_direct |  *  | backend_bucket_circular |
 '-----------------------'  *  '-------------------------'
             ^              *               ^
             |              *               |
             |              *               |
             |              *               |
             |  .-----------------------.   |
             '--| backend_bucket_cached |---'
                '-----------------------'
             A backend_bucket_cached is a transparent
             bucket that directly uses another bucket
             as backend device and caches all accesses.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: ubiformat: move code to common/ ...

This is the final step to separate the ubiformat code from the
command. With this the ubiformat code gains a C API.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/ratp'

bootm: add initial FIT support ...

This implementation is inspired by U-Boot's FIT support. Instead of
using libfdt (which does not exist in barebox), configuration signatures
are verified by using a simplified DT parser based on barebox's own
code.

Currently, only signed configurations with hashed images are supported,
as the other variants are less useful for verified boot. Compatible FIT
images can be created using U-Boot's mkimage tool.

Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

barebox remote control ...

This adds the ability to control barebox over serial lines. The regular
console is designed for human input and is unsuitable for controlling
barebox from scripts since characters can be lost on both ends, the data
stream contains escape sequences and the prompt cannot be easily matched
upon.
This approach is based on the RATP protocol. RATP packages start with a
binary 0x01 which does not occur in normal console data. Whenever a
0x01 character is detected in the console barebox goes into RATP mode.
The RATP packets contain a simple structure with a command/respone
type and data for that type. Currently defined types are:

BB_RATP_TYPE_COMMAND (host->barebox):
	Execute a command in the shell
BB_RATP_TYPE_COMMAND_RETURN (barebox->host)
	Sends return value of the command back to the host, also means
	barebox is ready for the next command
BB_RATP_TYPE_CONSOLEMSG (barebox->host)
	Console message from barebox

Planned but not yet implemented are:

BB_RATP_TYPE_PING (host->barebox)
BB_RATP_TYPE_PONG (barebox->host)
	For testing purposes
BB_RATP_TYPE_GETENV (host->barebox)
BB_RATP_TYPE_GETENV_RETURN (barebox->host)
	Get values of environment variables

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Andrey Smirnov <andrew.smirnov@gmail.com>

common/Makefile: Add missing dependency ...

imd-barebox.o needs include/generated/compile.h. Add the dependency.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

restart: replace reset_cpu with registered restart handlers ...

This replaces the reset_cpu() function which every SoC or board must
provide with registered handlers. This makes it possible to have multiple
reset functions for boards which have multiple ways to reset the machine.
Also boards which have no way at all to reset the machine no longer
have to provide a dummy reset_cpu() function.

The problem this solves is that some machines have external PMICs or
similar to reset the system which have to be preferred over the
internal SoC reset, because the PMIC can reset not only the SoC but also
the external devices.

To pick the right way to reset a machine each handler has a priority. The
default priority is 100 and all currently existing restart handlers are
registered with this priority. of_get_restart_priority() allows to retrieve
the priority from the device tree which makes it possible for boards to
give certain restart handlers a higher priority in order to use this one
instead of the default one.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

memsize: Compile for PBL aswell ...

Detecting the memory size is a domain for PBL, so compile it for PBL
aswell.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX6: bbu nand: Move to common place ...

The code can be used on i.MX28 aswell, so move it to a common place.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

timeout: factor out wait-for-key-press loop into separate file ...

This patch factors out the wait-for-key-press loop from the shell command
"timeout" into a sparate file, so that it can be used from C, too.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/state'

state: add framework for persistent state handling ...

This patch adds a framework to describe, access, store and restore a set of
variables. A state variable set can be fully described in a devicetree node.
This node could be part of the regular devicetree blob or it could be an extra
devicetree solely for the state. The state variable set contains variables of
different types and a place to store the variable set.

For more information see:
    Documentation/devicetree/bindings/barebox/barebox,state.rst

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

digest: move digest.c to crypto ...

with not the rest of the implementation

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

pbl: Add support for memory_display ...

The PBL has console support now, so add memory_display support aswell
which can be a good debugging aid.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Add a Firmware programming framework ...

This framework handles a list of registered Firmware programming handlers
to unify a firmware programming interface by hiding the details how
to program a specific Firmware in its handler. This is created with FPGAs
in mind but should be usable for other devices aswell.
A user has two possibilities to load a firmware. A device file is create
under /dev/ which can be used to copy a firmware to. Additionally a
firmwareload command is introduced which can list the registered firmware
handlers and also to upload a firmware.

Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/usb-gadget' ...

Conflicts:
	commands/Makefile
	common/Kconfig
	common/Makefile
	drivers/usb/gadget/dfu.c

Merge branch 'for-next/metadata' ...

Conflicts:
	arch/arm/dts/Makefile
	common/Makefile
	lib/Makefile

Add support for metadata in barebox images ...

It's often useful to get some information about a barebox image
before starting or flashing it. This patch introduces barebox
Image MetaData (IMD). When enabled a barebox image will contain
a list of tags containing the desired information. We have tags
for:

- the barebox release (2014.07.0-00160-g035de50-dirty)
- the build timestamp (#741 Mon Jul 28 15:08:54 CEST 2014)
- the board model the image is intended for
- the device tree toplevel compatible property

Also there is an additional generic key-value store which stores
parameters for which no dedicated tag exists. In this patch it
is used for the memory size an image supports.

Since there is no fixed offset in a barebox image which can be
used for storing the information, the metadata is stored somewhere
in the image and found by iterating over the image. This works
for most image types, but obviously not for SoC images which are
encoded or encrypted in some way.

There is a 'imd' tool compiled from the same sources for barebox,
for the compile host and for the target, so the metadata information
is available whereever needed.

For device tree boards the model and of_compatible tags are automatically
generated.

Example output of the imd tool for a Phytec phyFLEX image:

build: #889 Wed Jul 30 16:08:54 CEST 2014
release: 2014.07.0-00167-g6b2070d-dirty
parameter: memsize=1024
of_compatible: phytec,imx6x-pbab01 phytec,imx6dl-pfla02 fsl,imx6dl
model: Phytec phyFLEX-i.MX6 Duallite Carrier-Board

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Add function to parse a string in dfu format ...

The dfu command parses a string which contains a list of
devices and flags. This format is useful for other users
aswell, so add common helper functions to parse it and
let the dfu command use this format.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Add initial EFI architecture support ...

This adds support for running barebox in an EFI environment
on X86 PC hardware.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

add menutree command ...

Creating menus from the shell using the regular 'menu' command is rather
complicated. This adds a 'menutree' command which creates a menu from
a directory structure. In the directory structure each directory corresponds
to a single menu entry. The directory contains the following files:

title -  A file containing the title of the entry as shown in the menu
box -    If present, the entry is a 'bool' entry. The file contains a variable
         name from which the current state of the bool is taken from and saved
         to.
action - if present this file contains a shell script which is executed when
         when the entry is selected.

If neither 'box' or 'action' are present this entry is considered a submenu
containing more entries.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

defaultenv: Allow multiple defaultenvironment overlays ...

We can compile barebox for multiple boards at once, but currently
they all share a single default environment. This patch adds a
defaultenv_append() which boards can call to customize the default
environment during runtime. Each board now generate default environment
snippets using bbenv-y and add them during runtime with defaultenv_append()

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

move defaultenv-2 to defaultenv/defaultenv-2-* ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

move defaultenv-1 to defaultenv/defaultenv-1 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

defaultenv: Align defaultenv array ...

The default environment buffer is an unsigned char array and thus
may be unaligned. Some decompression algorithms expect the buffer
to be sufficiently aligned for u32 accesses. We make this sure by
copying the default env to a temporary buffer. Instead of doing this
just add a __aligned(4) to the default environment.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>