Merge branch 'for-next/misc'

of: base: add function to copy a device tree node ...

Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: populate clock providers before other devices ...

Clocks are a basic resource, which may be needed early by other
devices or even the bus driver (as is the case with the ARM AMBA
bus). Register them before populating other devices.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

remove checks for xzalloc() returning NULL ...

xzalloc() either returns memory or panics, so checking for NULL is useless.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: base: port of_device_is_big_endian from linux ...

|commit 37786c7
|Author: Kevin Cernekee <cernekee@gmail.com>
|Date:   Thu Apr 9 13:05:14 2015 -0700
|
|    of: Add helper function to check MMIO register endianness
|
|    SoC peripherals can come in several different flavors:
|
|     - little-endian: registers always need to be accessed in LE mode (so the
|       kernel should perform a swap if the CPU is running BE)
|
|     - big-endian: registers always need to be accessed in BE mode (so the
|       kernel should perform a swap if the CPU is running LE)
|
|     - native-endian: the bus will automatically swap accesses, so the kernel
|       should never swap
|
|    Introduce a function that checks an OF device node to see whether it
|    contains a "big-endian" or "native-endian" property.  For the former case,
|    always return true.  For the latter case, return true iff the kernel was
|    built for BE (implying that the BE MMIO accessors do not perform a swap).
|    Otherwise return false, assuming LE registers.
|
|    LE registers are assumed by default because most existing drivers (libahci,
|    serial8250, usb) always use readl/writel in the absence of instructions
|    to the contrary, so that will be our fallback.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: of_path: find device via partuuid ...

When a node is compatible to a fixed-partitions, support searching the
corresponding device via the partuuid, if it specified in the device tree.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

of_device_is_stdout_path: split off options and support aliases ...

Several device trees use something like:

	stdout-path = "serial0:115200n8";

Currently of_device_is_stdout_path fails to do the right thing here
because it expects an absolute node path and no options. So split off
options (everything after the colon) and resolve aliases.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of_device_is_stdout_path: simplify ...

Test for dev->device_node being NULL earlier which at the end of the
function allows to simplify the calculation of the return value

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/misc'

of: Search for /memory node by type, if it is not found by name ...

Update of Rockchip dts featured changes of simple "/memory" node
to "/memory@6000000". Support this change.

Signed-off-by: Andrey Panov <rockford@yandex.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: of_find_node_by_devpath: Fix offset in mtd devices ...

When a cdev is a mtd device the partition offset must be used from
there, not from the cdev.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/misc'

of: base: of_new_property(): use xstrdup() instead of strdup() ...

At the moment of_new_property() uses xfunctions for memory
allocation so we can use xstrdup() instead of strdup()
for code simplification.

A side effect of this commmit is that
the of_new_property() function can't return NULL
anymore if CONFIG_OFTREE is set.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: base: exclude memcpy-like code from of_property_write_u8_array() ...

The of_new_property() function already has functionality
to copy data into of_property so we can make
of_property_write_u8_array() simpler.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: of: only add partition layout param when GLOBAL support is enabled ...

Fixes: a2fa18f9f483 (mtd: of: Make used partition binding configurable)
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: of_net: use a loop ...

iterate over the different property names rather than having
the same code three times.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: of_path: add of_find_node_by_devpath() ...

We already have of_find_path_by_node() which finds a device path
for a given device node. This is used by the state framework to
find its backend path. This path has to be translated back to
a device node when Linux is started. The current approach turned
out to be too simple: We assumed that the node path is the same
in the tree Linux is started with. This is not true in several
cases:
- partition nodes should have the name "partition@<offset>", but
  in several trees they have "partition@<num>"
- There are two different partition bindings: The legacy binding
  and the new one with an additional partitions subnode which has
  a compatible = "fixed-partitions" property.
The node path only stays the same when the internal tree uses the
same bindings and node names as the tree Linux is started with.

To overcome this limitation we create of_find_node_by_devpath()
which converts the device path back to a device node. It does
so by finding the device node of the hardware device rather than
the partition node. It then parses over the partitions in this
device node with the known bindings looking for a partition which
matches in offset and size to the barebox partition.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: partitions: flag partitions from a partition table ...

We are going to call the of_partition_fixup for regular block
devices like MMC/SD aswell. Add a flag to partitions indicating
they are instanciated from a on-disk partition table so that they
won't be added as device tree partitions during fixup.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: partition: only create partition node when partitions exist ...

With the legacy partition binding we did not modify the device
node when no partition exist, but with the new binding we would
create the "partitions" node with compatible = "fixed-partitions".
Prevent that by catching the absence of partitions early.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: partition: Make partition fixup independent from mtd devices ...

The of partition parser is not only used for mtd device, but also
for regular block devices, so make the of_mtd_fixup code independent
of mtd devices also, so that other devices can be fixed up, too.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: partition: support 64bit partition sizes ...

Do not assume that #address-cells and #size-cells are
both 1. Parse them appropriately to support devices
> 4GuB.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: of: Make used partition binding configurable ...

So far we used the legacy partition binding when fixing up the
mtd partition nodes. Change this to default to the new binding
with a "partitions" submode. Make this behaviour configurable
though: This creates a new of_binding device variable for
mtd devices. This can be set to:

- "new": Use the new partition binding (default)
- "legacy": Use the old partition binding
- "donttouch": Do not touch the partition node

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: partition: Move of_mtd_fixup to drivers/of/ ...

Move the fixup code where the parser code is already.
Since the code will not only be used for mtd in the future
drivers/of/ is a better place than drivers/mtd/.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

treewide: Use of_property_write_string() where appropriate ...

Replace users which use of_set_property() to set a property to a string
with of_property_write_string().

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: Add of_property_write_string() ...

Setting a property to a string is used many times. Create a convenience
function for it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/efi'

of: base: Use scoring in DT device matching ...

Port Linux kernel algorithm for both of_device_is_compatible() and
of_match_node(). With this change former now returns a score on the
scale of 0 to INT_MAX/2, and the latter goes through all compatiblity
entries and selects the entry that has the best matching score.

This is needed for SoCs where IP blocks are backwards compatible and
corresponding OF nodes can proclaim compatibility with several entries
found in driver's compatiblity table. One such example would be PIO
pinctrl block on AT91SAM9x5 SoCs which declare compatibility with with
both "atmel,at91sam9x5-pinctrl" and "atmel,at91rm9200-pinctrl".

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

efi: move x86 efi boot support to x86 arch ...

prepare to drop the efi arch as efi boot up is not arch sepecific

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/imx'

of: partitions: force "partitions" subnode ...

The binding states that a subnode containing partition subnodes
should have the name "partitions". Enforce this so that we do not
parse nodes with other names which may have partition descriptions
for other disks.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>