LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

History for barebox / images

2017-11-07	2a8a579 Browse files » ARM: boards: phytec-som-am335x: Add unified MLO ... PCM-060 modules only have one-bank RAMs populated, which allows us to find out the populated RAM size at run-time. Therefore, a new entry point was create 'PHYTEC_ENTRY_UNIFIED_MLO'. This creates a MLO for all modules of one family and all existing PCM-060 MLOs were replaced with this new entry point. To provide backward compatibility for older modules, these were not affected. In the first step generic RAM timings for the module family get loaded, because RAM accesses are only possible with an initialized controller. After that, the RAM size will be calculated and the RAM controller gets reinitialized with the correct RAM timings. Signed-off-by: Daniel Schultz <d.schultz@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Daniel Schultz authored on 3 Nov 2017 Sascha Hauer committed on 7 Nov 2017
2017-10-19	19978a0 Browse files » Merge branch 'for-next/imx' Sascha Hauer committed on 19 Oct 2017
2017-10-17	51bf684 Browse files » ARM: vexpress: switch to DT probe and multi-image build ... This switches the VExpress support to use an internal DT, instead of probing the peripherals from a board file. It also switches to a multi-iamge build with both CA9 and CA15 variants of the VExpress board being supported. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 12 Oct 2017 Sascha Hauer committed on 17 Oct 2017
2017-10-17	74bc356 Browse files » ARM: Add i.MX6ull evk support ... The i.MX6ull-EVK is a evaluation board for the i.MX6ull from NXP. The upstream DTS is used, support should be fairly complete: - 2x fec ethernet - 1x USB Host - 1x USB OTG - 2x SD Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 17 Oct 2017
2017-09-06	65e38e2 Browse files » arm: dts: am335x: Add phycore emmc device tree ... Add a new device tree for phyCORE SOMs with EMMC enabled and NAND disabled. Signed-off-by: Daniel Schultz <d.schultz@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Daniel Schultz authored on 22 Aug 2017 Sascha Hauer committed on 6 Sep 2017
2017-09-06	5dd0e47 Browse files » arm: dts: Enable NAND in DTS instead of DTSI ... Starting with PCM-062, NAND isn't the main non-volatile memory for the AM335x. Because that, NAND has be disabled in the SOM dtsi file and will be enabled in a specific NAND SOM file. Signed-off-by: Daniel Schultz <d.schultz@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Daniel Schultz authored on 22 Aug 2017 Sascha Hauer committed on 6 Sep 2017
2017-07-30	a0a5a7b Browse files » ARM: i.MX: Add support for NXP i.MX7 SABRESD board ... Add minimal code to support NXP i.MX7 SABRESD board. Tested to have working SD card and first Ethernet port as well as being able to boot upstream Linux kernel (4.12+). Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Andrey Smirnov authored on 28 Jul 2017 Lucas Stach committed on 30 Jul 2017
2017-07-20	03c381f Browse files » ARM: imx: phyCORE i.MX7 on phyBOARD-Zeta support ... This adds preliminary support for the phyCORE i.MX7 module on a phyBOARD-Zeta baseboard. The DTs will likely change in the future when PHYTEC finalizes their BSP. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Sascha Hauer authored on 19 Jul 2017 Lucas Stach committed on 20 Jul 2017
2017-06-19	ce9942d Browse files » ARM: mvebu: Add initial support for Turris Omnia ... Up to now only 2nd stage booting is tested and boots up to a prompt. i2c and spi are working, ethernet, usb and sata don't. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Uwe Kleine-König authored on 15 Jun 2017 Sascha Hauer committed on 19 Jun 2017
2017-06-14	442f634 Browse files » Merge branch 'for-next/imx' Sascha Hauer committed on 14 Jun 2017
2017-06-07	5f7e0d1 Browse files » ARM: i.MX6: add Technexion Pico Hobbit support ... This adds support for the i.MX6UL Technexion Pico Hobbit. The board comes with different amounts of RAM. We create one image for the 256MB and one for the 512MB variant. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> --- v1 -> v2: - removed already prepared clock setup v2 -> v3: - added phy-reset-post-delay as the support is now available Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Michael Grzeschik authored on 7 Jun 2017 Sascha Hauer committed on 7 Jun 2017
2017-05-24	370c6cc Browse files » Makefile: Speed up evaluation of ld options ... Since "333ff7b1e4 Fix linking with new ld, based on u-boot" the build with multiple images became unreasonable slow. This is because the ld-option macro was evaluated once for each image. Fix this by exporting and using LDFLAGS_barebox from the main Makefile. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 24 May 2017
2017-05-17	861ae61 Browse files » images: clean .imx-sram-img files ... The command make ARCH=arm clean should also clean the .imx-sram-img files. Signed-off-by: Stefan Lengfeld <contact@stefanchrist.eu> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Stefan Lengfeld authored on 15 May 2017 Sascha Hauer committed on 17 May 2017
	4dc4e61 Browse files » ARCH: ARM: Add support for phytec-phycore-imx6ull ... Created imx6ull devicetree to support Phytec phyCORE-i.MX6ULL. - 256 MB RAM - 128 MB NAND - 10/100 Mbit Ethernet Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Stefan Riedmueller authored on 11 May 2017 Sascha Hauer committed on 17 May 2017
	333ff7b Browse files » Fix linking with new ld, based on u-boot ... U-boot commit info: http://git.denx.de/?p=u-boot.git;a=commit;h=`e391b1e` Signed-off-by: Andrey Panov <rockford@yandex.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Panov authored on 11 May 2017 Sascha Hauer committed on 17 May 2017
2017-05-05	5485383 Browse files » Merge branch 'for-next/socfpga' Sascha Hauer committed on 5 May 2017
2017-05-05	ce936cd Browse files » Merge branch 'for-next/imx' Sascha Hauer committed on 5 May 2017
2017-05-04	7116835 Browse files » ARM: socfpga: add support for reflex achilles board ... Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Steffen Trumtrar authored on 28 Apr 2017 Sascha Hauer committed on 4 May 2017
2017-05-03	d5c8bc3 Browse files » ARM: socfpga: add arria10 support ... Arria10 is a SoC + FPGA like the Cyclone5 SoCFPGA that is already supported in barebox. Both a the same in some parts, but totaly different in others. Most of the hardware blocks are the same in the SoC parts. The OCRAM is larger on the Arria10 and the SDRAM controller is different. The serial core only supports 32bit accesses (different to the 8bit accesses on the Cyclone5). As Arria10 has 256KB of OCRAM, it is possible to fit a larger barebox (and/or use PBL) instead of the two stage bootprocess used on the Cyclone5 and its 64KB OCRAM. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Steffen Trumtrar authored on 28 Apr 2017 Sascha Hauer committed on 3 May 2017
2017-04-24	2c506af Browse files » ARM: i.MX50: Add support for i.MX50 based Amazon Kindle e-book readers ... The Kindle Model No. D01100 (Kindle Wi-Fi), D01200 (Kindle Touch) and EY21 (Kindle Paperwhite) are refered as the Kindle 4th and 5th generation. Those models are based on an i.MX50 SoC and use LPDDR1 or LPDDR2 Memory. The devices boot in internal boot mode from a build-in eMMC, alternatively some devices may be set into USB-downloader mode by pressing a specific key at startup. Add support for the i.MX50 based Kindle device and make barebox a drop-in replacement for the factory shipped u-boot image. Notable features: - Support for eMMC, USB, UART, I2C, SPI and Keys (except keyboard). - LPDDR1 and LPDDR2 setup is done via DCD, the same imximage may be used for USB-startup and for installation. - Support for vendor specific ATAGs that are required for the Kindle-System. - usbserial barebox console access by pressing Select button at startup, alternatively full console support on connector J14. Signed-off-by: Alexander Kurz <akurz@blala.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Kurz authored on 23 Apr 2017 Sascha Hauer committed on 24 Apr 2017
2017-04-19	f7f947e Browse files » ARM: at91sam9x5ek: Actually build image ... The Kconfig variable is named CONFIG_MACH_AT91SAM9X5EK, not MACH_AT91SAM9X5EK. Reported-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 19 Apr 2017
2017-04-10	d1de2e1 Browse files » ARM: imx6: add Hummingboard2 support ... This adds support for the Hummingboard2 baseboard for the SolidRun MicroSOM modules. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 8 Apr 2017 Sascha Hauer committed on 10 Apr 2017
2017-03-30	3ba6acc Browse files » at91sam9x5ek: Convert to mult-image build ... Convert AT91SAM9X5-EK board code to multi-image build process, similar to how majority of i.MX board code is built. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 23 Mar 2017 Sascha Hauer committed on 30 Mar 2017
2017-03-13	a2e3bad Browse files » Merge branch 'for-next/rpi' Sascha Hauer committed on 13 Mar 2017
2017-03-02	e8fab18 Browse files » ARM: rpi: switch to DT probe and multi-image build ... This commit switches the RaspberryPi arch over to probe Barebox from the builtin DT and enables multi-image builds. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 1 Mar 2017 Sascha Hauer committed on 2 Mar 2017
2017-03-01	6d76aaf Browse files » arm: boards: phytec-som-am335x: Remove 1GB RAM type ... This machine was a prototype and was never shipped to customers. Since it has no dependencies to any image, it can be removed. Signed-off-by: Daniel Schultz <d.schultz@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Daniel Schultz authored on 1 Mar 2017 Sascha Hauer committed on 1 Mar 2017
2017-02-07	aefc678 Browse files » i.MX: vf610: Add support for ZII VF610 Dev Family ... Add support for ZII VF610 Dev based designs such as: - VF610 Dev, revision B - VF610 Dev, revision C - CFU1, revision A - SPU3, revision A - SCU4 AIB, revision C Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 3 Feb 2017 Sascha Hauer committed on 7 Feb 2017
2017-01-20	eb101ad Browse files » ARM: i.MX: Add WaRP7 board support ... Signed-off-by Juergen Borleis <jbe@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Borleis authored on 6 Dec 2016 Sascha Hauer committed on 20 Jan 2017
2017-01-18	a16cab1 Browse files » ARM: rdu2: support QP variant ... This adds support for the QuadPlus variant of the board as a separate Barebox binary. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 30 Nov 2016 Sascha Hauer committed on 18 Jan 2017
2017-01-18	6031c0e Browse files » ARM: imx: Add support for ZII RDU2 board ... Add support for RDU2 board from Zodiac Inflight Innovations. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 30 Nov 2016 Sascha Hauer committed on 18 Jan 2017