LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

History for barebox / commands

2018-01-25	b024f6f Browse files » commands/Kconfig: fix copy'n'paste error in CMD_GPIO help ... Signed-off-by: Ulrich Ölmann <u.oelmann@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ulrich Ölmann authored on 24 Jan 2018 Sascha Hauer committed on 25 Jan 2018
2018-01-22	5ebdae4 Browse files » Merge branch 'for-next/misc' Sascha Hauer committed on 22 Jan 2018
	2f9b25f Browse files » mci: drop unused parameter from mci_switch() ... The SWITCH command has two purposes: a) switch the command set b) Write to the EXT_CSD register If the access field (bits [25:24]) in the argument are b00, we're in case a), otherwise in b). As mci_switch() always passes MMC_SWITCH_MODE_WRITE_BYTE (0b3) in the access field, only case b) is relevant here. According to the eMMC specification[1] the command set field is ignored in case b) and so the respective parameter (that is unused already now) can be dropped. [1] Embedded Multi-Media Card (e•MMC) Electrical Standard (5.1), February 2015; paragraph 6.6.1 Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Uwe Kleine-König authored on 19 Jan 2018 Sascha Hauer committed on 22 Jan 2018
	0809582 Browse files » commands/Kconfig: Fix tpyo ... s/Pring/Print/ Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Uwe Kleine-König authored on 19 Jan 2018 Sascha Hauer committed on 22 Jan 2018
2018-01-11	eec0140 Browse files » usbgadget: Update command help text ... - Do not use BAREBOX_CMD_HELP_OPT with an empty option to extend the previous option text. It confuses the rst converter - Add a '\t' to the options to align the option help texts in the barebox command help Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 11 Jan 2018
2018-01-05	3dbe78a Browse files » Merge branch 'for-next/net' Sascha Hauer committed on 5 Jan 2018
2018-01-05	052d1c9 Browse files » Merge branch 'for-next/misc' Sascha Hauer committed on 5 Jan 2018
2017-12-15	183515b Browse files » commands: Add ip_route_add command ... The ip_route_get command is used to retrieve the network device used to reach a given IP address. This is useful for informational purposes and also for the network boot which wants to get the linux.bootargs parameter of the network device used for nfsroot. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 15 Dec 2017
2017-12-14	2319503 Browse files » net: remove "current" network device ... Now that we can do routing we no longer need a "current" network device. Remove it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 14 Dec 2017
	528298b Browse files » net: dhcp: rework ... The DHCP code is a mess. It is not clear which options are sent to the server and which options are returned from the server. Also environment variables are read from and written to all over the place. This patch cleans this up. There now is struct dhcp_req_param which is used for options sent to the server and struct dhcp_result which contains the values sent from the server. The values from the server are written to the barebox variables in a single place. Also it's now possible to call the dhcp code without modifying barebox variables at all, storing the result only in the dhcp result struct. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 14 Dec 2017
	ab84733 Browse files » net: dhcp: Allow to specify network device ... Instead of allowing to DHCP only on the "current" network device, allow to specify the desired network device. This is a first step to get rid of the concept of a "current" network device. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 14 Dec 2017
2017-12-06	9e34d2e Browse files » commands/miitool: Allow specifying PHY by their full path ... Make -s option to be a bit more consistent with how it is used in other commands by allowing PHY device to be specified by either its name of full path in /dev. This change also allows us to leverage autocompletion since it will work as expected for paths in /dev. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 4 Dec 2017 Sascha Hauer committed on 6 Dec 2017
2017-12-06	dbe6452 Browse files » commands: miitool: Constify 'phydevname' in mdiobus_show() ... It seems like mdiobus_show() doesn't need more than read-only to 'phydevname', so constify it to allow passing const stings in. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 4 Dec 2017 Sascha Hauer committed on 6 Dec 2017
2017-12-01	3edbc17 Browse files » driver: Add device_detect_all() function ... Add a device_detect_all function to detect all devices and use it in the detect command. This makes the functionality reusable in other code. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 1 Dec 2017
2017-12-01	f754335 Browse files » detect command: Drop -e option ... The -e option is not that useful. Normally, when a device cannot be detected, then there should be no reason to not try to detect other devices. When a user is interested in a particular detect result, detect can still be called with that (and only that) device. We could also argue that the user should not care about the result of the detect call, but instead check if the desired device is present afterwards. Drop handling of the -e option, but still ignore it for compatibility reasons. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 1 Dec 2017
2017-11-23	834527a Browse files » nv: add device parameter overwrites to completion list ... nv variables in the form dev.<devname>.* can be used to make device parameters persistent. Add these to the completion list to make setting these variables more convenient. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 23 Nov 2017
2017-11-13	e65434f Browse files » Merge branch 'for-next/nv' Sascha Hauer committed on 13 Nov 2017
2017-11-03	1467855 Browse files » command: nv: rewrap help text lines ... Just let the help text appear a bit more aligned. Signed-off-by: Enrico Jorns <ejo@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Enrico Jorns authored on 1 Nov 2017 Sascha Hauer committed on 3 Nov 2017
	8fc9636 Browse files » commands: nv: adjust command help ... Help did not point out that -r option requires n arguments and did not mention support for removing variables in help text. Also introduce and consistently reuse 'NV' as abbreviation for 'non volatile'. Signed-off-by: Enrico Jorns <ejo@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Enrico Jorns authored on 1 Nov 2017 Sascha Hauer committed on 3 Nov 2017
	2145fdf Browse files » commands: nv: assure error code will be returned when an error occurred ... Due to iteration over possibly multiple variables, the return value of an individual call to nvvar_remove() / nvvar_add() gets lost. This will result in do_nv() returning success (0) if any variable processing failed as long as processing of the last variable succeeded. Processing will not be aborted on individual errors, such as the 'cp' handles it for invalid files. Signed-off-by: Enrico Jorns <ejo@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Enrico Jorns authored on 1 Nov 2017 Sascha Hauer committed on 3 Nov 2017
	31fd03b Browse files » commands: nv: call nvvar_print() only if no argument is given ... Printing the nv variables (before performing any modification!) is useless and irritating. Signed-off-by: Enrico Jorns <ejo@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Enrico Jorns authored on 1 Nov 2017 Sascha Hauer committed on 3 Nov 2017
	7bdd225 Browse files » commands: nv: fail with verbose message if invoked without args ... Signed-off-by: Enrico Jorns <ejo@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Enrico Jorns authored on 1 Nov 2017 Sascha Hauer committed on 3 Nov 2017
2017-10-23	23b6419 Browse files » commands: spi: do not restrict spi's data to be hex-formatted ... Change the default base to 0 to be consistent with the "mw" command and particularly allow decimally formatted data. The price to pay is needing the usual prefix "0x" for each hex-formatted number. Signed-off-by: Ulrich Ölmann <u.oelmann@pengutronix.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ulrich Ölmann authored on 19 Oct 2017 Sascha Hauer committed on 23 Oct 2017
2017-10-23	9d70373 Browse files » commands: i2c: do not restrict i2c_write's data to be hex-formatted ... Change the default base to 0 to be consistent with the "mw" command and particularly allow decimally formatted data. The price to pay is needing the usual prefix "0x" for each hex-formatted number. Signed-off-by: Ulrich Ölmann <u.oelmann@pengutronix.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ulrich Ölmann authored on 19 Oct 2017 Sascha Hauer committed on 23 Oct 2017
2017-10-19	a10a8e5 Browse files » Merge branch 'for-next/usbgadget' Sascha Hauer committed on 19 Oct 2017
2017-10-16	162cbde Browse files » fbtest: add gradients pattern ... This pattern draws red, green, blue, and white color gradients, together with 3 anchor rectangles in corners. To be used with automated screen testing via computer vision methods. Suggested-by: Chris Healy <cphealy@gmail.com> Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Tested-by: Chris Healy <[1]cphealy@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Nikita Yushchenko authored on 12 Oct 2017 Sascha Hauer committed on 16 Oct 2017
2017-10-16	e69017c Browse files » fbtest: add solid pattern ... This just fills entire screen with single color, as passed in -c argument in RRGGBB format. Suggested-by: Chris Healy <cphealy@gmail.com> Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Tested-by: Chris Healy <[1]cphealy@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Nikita Yushchenko authored on 12 Oct 2017 Sascha Hauer committed on 16 Oct 2017
2017-09-27	fa92b0b Browse files » fastboot command: Add -b option to export bbu handlers ... When -b is given the usbgadget command will automatically export the registered bbu handlers via fastboot. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 Sep 2017
2017-09-27	02ade8d Browse files » usbgadget command: catch errors when parsing the file list ... file_list_parse() can fail. Print an error message in this case instead of crashing. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 Sep 2017
2017-09-08	682569d Browse files » Merge branch 'for-next/state' Sascha Hauer committed on 8 Sep 2017