Documentation: framebuffer: update documentation to current state ...

Framebuffer console support was added in 2015.

Reported-by: TobSnyder at #barebox irc
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

docs: add reference to libratp-barebox in the remote-control docs ...

Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/fastboot-sparse'

Documentation: Bootchooser: fix typo ...

Signed-off-by: Bastian Stender <bst@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

usb: gadget: fastboot: Add sparse image support ...

Sparse images are needed for fastboot to flash images that do not
fit into memory.

Android fastboot is kind of a dumb protocol. It first sends you a
big image and afterwards it tells you where to put this image. This
of course limits fastboot to files smaller than the available memory.
To bypass this issue fastboot has so called Sparse image support. This
is a new image format that can contain holes in the data so a big image
can be written in multiple steps with holes in other areas each step.

Implementing this for UBI images is kind of tricky since ubiformat
normally expects to get a single image. Preparations to ubiformat
a device in multiple parts have been done in previous patches.
It is however, only for the first part possible to detect if it is
a UBI image. The other parts are just binary data and we cannot
know if we have to pass this data raw to the flash or use ubiformat.
For this reason this patch makes the 'u' flag in the partition
description mandatory for proper UBI image flashing on MTD devices.

fastboot passes a max_download_size variable to the host. This
variable contains the image size fastboot can take in one go.
We have to choose a good compromise here. On one hand we do not
want to risk that we actually do not have enough memory to hold the
transferred image, on the other hand we want images like bootloaders
not as sparse images, but in one go instead to make atomic exchange
of the bootloader possible. Right now we have chosen 8MiB which
should be big enough for all bootloaders. The value is configurable
via global.usbgadget.fastboot_max_download_size.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation: USB gadget: Add section for partition description ...

Partition descriptions are used with both fastboot and DFU, so add
a separate section describing them and remove it from the DFU section.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/net'

Merge branch 'for-next/misc'

net: environment: update automounts ...

Instead of using "ifup ethx" use "ifup -a" which works with all
network interfaces. Also replace "$ethx.serverip" with
"$global.net.server". This makes the automount independent of
the actual network interface. Remove all board specific
/env/init/automount files which were only there to use eth1 instead
of the previously hardcoded eth0.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: update network docs ...

The network configuration has changed in the previous patches. Update
the documentation accordingly.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation: state: mention SD/eMMC devices ...

The state framework also has support for SD/eMMC devices, so mention
them in the documentation.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation: remove :numbered: from lower level toctrees ...

Only the highest level toctree may have :numbered:, otherwise
sphinxs complains loudly that the subtree is already numbered.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation: defaultenv-2: Change highlight to make ...

It's a make snippet, so change highlighting accordingly.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

docs: rework and extend the 'state' and 'bootchooser' documentation ...

Many links between sections and examples were added to give the developer
the help to get it work.

Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/misc'

Documentation: improve network boot section ...

Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation: remote-control: fix typo ...

Correctly reference `--port` instead of	`--baudrate` when explaining
how to specify the port.

Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation: provide documentation for RNG interfaces. ...

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation: usbgadget: provide autostart notes ...

The usbgadget autostart functionality is already added. It's
time to reflect it in the documentation.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

state: Update documentation ...

- explain what buckets are
- rework text about storage backends
- explain redundancy concept

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation: remote-control: fix markup ...

Fix missing '*' for bold text and remove indentation. It should be
rendered as a single paragraph.

Signed-off-by: Stefan Lengfeld <s.lengfeld@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation: bootchooser: fix typos ...

Signed-off-by: Ulrich Ölmann <u.oelmann@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/misc'

Documentation: clarify that patches should target the master branch. ...

I asked Sascha if he still prefers patches against 'next', and it turned
out that this is not true any more and patches should be sent against
master.

Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

boot: add framework for redundant boot scenarios ...

There are several use cases where a redundant Linux system is needed. The
barebox bootchooser framework provides the building blocks to model different
use cases without the need to start from the scratch over and over again.

The bootchooser works on abstract boot targets, each with a set of properties
and implements an algorithm which selects the highest priority target to boot.

See the documentation contained in this patch for more information.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation: imd: fix sphinx warning ...

The patch fixes this sphinx warnings:

    barebox/Documentation/user/imd.rst:27: WARNING: Could not lex literal_block as "c". Highlighting skipped.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation: usb: fix sphinx warning ...

The patch fixes this sphinx warnings:

    barebox/Documentation/user/usb.rst:61: WARNING: Could not lex literal_block as "c". Highlighting skipped.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Cc: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation: variables: fix error in "code-block" directive ...

The patch fixes this sphinx error:

    barebox/Documentation/user/variables.rst:79: ERROR: Error in "code-block" directive:
    maximum 1 argument(s) allowed, 15 supplied.

    .. code-block:: sh
      barebox@Phytec phyCARD-i.MX27:/ nv dev.nand0.partitions: 4M(barebox),1M(barebox-environment),-(root)
      barebox@Phytec phyCARD-i.MX27:/ devinfo nand0
        Parameters:
        [...]
        partitions: 4M(barebox),1M(barebox-environment),8M(kernel),1011M(root)
        [...]

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation: barebox: fix 'Could not lex literal_block as "c"' warning ...

The patch fixes these sphinx warnings:

    barebox/Documentation/user/barebox.rst:19: WARNING: Could not lex literal_block as "c". Highlighting skipped.
    barebox/Documentation/user/barebox.rst:33: WARNING: Could not lex literal_block as "c". Highlighting skipped.
    barebox/Documentation/user/barebox.rst:186: WARNING: Could not lex literal_block as "c". Highlighting skipped.
    barebox/Documentation/user/barebox.rst:205: WARNING: Could not lex literal_block as "c". Highlighting skipped.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/state'