edit: make edit_aliases[] const ...

Although the elements of `edit_aliases[]` are of type `const char *`,
the elements themselves are not const-qualified.  Make them `const`.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

efi: move x86 efi boot support to x86 arch ...

prepare to drop the efi arch as efi boot up is not arch sepecific

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

stdio: rename getc to getchar ...

The function we have implemented as getc has the semantics of the
standard function getchar, so rename it accorgingly.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

edit: return error when save_file failed ...

When writing a file failed (e.g. due to a read-only file system), no
error was reported by the 'edit' tool. To be valid (and to not confuse
the poor user) at least '1' should be returned to indicate an error.

Signed-off-by: Enrico Jorns <ejo@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

edit: handle write() call errors in save_file() ...

save_file() did ignore possible errors of its write() calls.
Now the error code is used as return code for save_file().

write_full() is used instead of write() as it does not perform partial
writes which would require to check for returned size, too.

Signed-off-by: Enrico Jorns <ejo@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/metadata' ...

Conflicts:
	arch/arm/dts/Makefile
	common/Makefile
	lib/Makefile

move file helper functions to separate file ...

We have our file helper functions in several places. Move them
all to lib/libfile.c.
With this we no longer have file helpers in fs/fs.c which contains
the core fs functions and no functions in lib/libbb.c which are
not from busybox.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

serial: Add EFI stdio driver ...

This adds a driver which uses the EFI stdin/stdout interfaces to
implement a barebox console. Keyboard input should be fairly complete,
but not all vt100 needed by barebox work properly. The clear-to-eol
escape is missing causing garbled output in the editor.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation: remove doxygen documentation ...

The doxygen documentation is long outdated. Remove it. It will
be replaced with sphinx based documentation later.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: harmonize in-barebox documentation ...

This patch does probably too much, but it's hard (and very
cumbersome/time consuming) to break it out. What is does is this:

* each command has one short description, e.g. "list MUX configuration"
* made sure the short descriptions start lowercase
* each command has one usage. That string contains just the
  options, e.g. "[-npn]". It's not part of the long help text.
* that is, it doesn't say "[OPTIONS]" anymore, every usable option
  is listed by character in this (short) option string (the long
  description is in the long help text, as before)
* help texts have been reworked, to make them
  - sometimes smaller
  - sometimes describe the options better
  - more often present themselves in a nicer format
* all long help texts are now created with BUSYBOX_CMD_HELP_
  macros, no more 'static const __maybe_unused char cmd_foobar_help[]'
* made sure the long help texts starts uppercase
* because cmdtp->name and cmdtp->opts together provide the new usage,
  all "Usage: foobar" texts have been removed from the long help texts
* BUSYBOX_CMD_HELP_TEXT() provides the trailing newline by itself, this
  is nicer in the source code
* BUSYBOX_CMD_HELP_OPT() provides the trailing newline by itself
* made sure no line gets longer than 77 characters
* delibertely renamed cmdtp->usage, so that we can get compile-time
  errors (e.g. in out-of-tree modules that use register_command()
* the 'help' command can now always emit the usage, even without
  compiled long help texts
* 'help -v' gives a list of commands with their short description, this
  is similar like the old "help" command before my patchset
* 'help -a' gives out help of all commands

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: group 'help' output ...

The old output of "help" was just producing a long list, that usually
scrolled of the screen (even on a X11 terminal). This list is more
compact, and also sorted by groups.

The old output format (plus grouping) is now available with 'help -v'.

Example:

   Information commands:
     ?, devinfo, help, iomem, meminfo, version
   Boot commands:
     boot, bootm, go, loadb, loads, loadx, loady, saves, uimage
   ...

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/misc' ...

Conflicts:
	common/environment.c

input: Add BB_ prefix to KEY_ defines ...

Our KEY_ defines conflict with the standard Linux KEY_ defines, so
add a BB_ prefix to them.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: edit: properly propagate error code ...

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Treewide: remove address of the Free Software Foundation ...

The FSF address has changed in the past. Instead of updating it
each time the address changes, just drop it completely treewide.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

edit: Add a status line ...

When invoked from a skript it's useful to know which file is edited. Also
Add information how to exit the editor to the status line.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

edit: Add proper screen size handling ...

We used to have a quite slow algorithm to detect the screen size
which was unused for long time. This patch changes this to first
set the cursor to x=999, y=999 and the read back the actual cursor
position. Since I am not confident that this works on all terminals
this is only used when edit is called as 'sedit'.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: remove struct command pointer from commands ...

This is unused in all commands and thus can be removed.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Fix error handling with malloc, memalign etc. Introduce xmemalign(). ...

The idea is to panic() when there is no memory available for normal
operation. Exception: code which can consume arbitrary amount of RAM
(example: files allocated in ramfs) must report error instead of panic().

This patch also fixes code which didn't check for NULL from malloc() etc.

Usage: malloc(), memalign() return NULL when out of RAM.
xmalloc(), xmemalign() always return non-NULL or panic().

Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

doc: unify documentation for 'edit' ...

Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>

edit: make locally used variable static ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

edit: sparse fixes ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

trivial: fix typos concerning "instead" ...

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

remove typedef cmd_tbl_t and replace it with struct command ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Remove unnecessary casts in key defines ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

rename U-Boot-v2 project to barebox ...

This has been done with the following script:

find -path ./.git -prune -o -type f -print0 | xargs -0 -r sed -i \
	-e 's/u2boot/barebox/g' \
	-e 's/U2Boot/barebox/g' \
	-e 's/U-boot V2/barebox/g' \
	-e 's/u-boot v2/barebox/g' \
	-e 's/U-Boot V2/barebox/g' \
	-e 's/U-Boot-v2/barebox/g' \
	-e 's/U_BOOT/BAREBOX/g' \
	-e 's/UBOOT/BAREBOX/g' \
	-e 's/uboot/barebox/g' \
	-e 's/u-boot/barebox/g' \
	-e 's/u_boot/barebox/g' \
	-e 's/U-Boot/barebox/g' \
	-e 's/U-boot/barebox/g' \
	-e 's/U-BOOT/barebox/g'

find -path ./.git -prune -o \( -name "*u-boot*" -o -name "*uboot*" -o -name "*u_boot*" \) -print0 | \
	xargs -0 -r rename 's/u[-_]?boot/barebox/'

It needs some manual fixup following in the next patch

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: remove maxargs ...

No need to check for maximum argument counts. The commands are
safe to be called with more arguments, so lets safe some bytes.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: return COMMAND_ERROR_USAGE ...

instead of calling u_boot_cmd_usage in each command to safe
space.

Signed-off-by: Sascha Hauer <sha@pengutronix.de>

Subject: [PATCH] [general] Fixed constant strings in data section issue ...

For practical reasons I changed all string literals assumed to be constant
to reside in .rodata subsection at end of .text section.

Signed-off-by: Carsten Schlote <schlote@vahanus.net>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

adding various doku