Merge branch 'for-next/state'

Merge branch 'for-next/serdev'

Merge branch 'for-next/misc'

Merge branch 'for-next/imx-reset-reason'

blspec: add checking of optional key machine-id ...

For filtering of Bootloader Spec entries, Bootloader Spec
specify an optional key machine-id. By set the
global.boot.machine-id variable the checking of machine-id
key in Bootloader Spec entries will be activate. If the
variable and key match, appropriate boot entry will be
booting. If it not match boot entry will be ignore and
barebox check the next boot entry.

Signed-off-by: Andreas Schmidt <mail@schmidt-andreas.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

common: reset_source: Introduce reset_source_name() ...

Introduce reset_source_name() to get string representation of current
reset source.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

common: reset_source: Add the notion of "reset source instance" ...

In order to accomodate SoCs that come with multiple watchdogs (or any
other reset sources of the same kind) add a notion of "reset source
instance", similar to what we already have for bootsource API.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

serdev: Allow polling interval to be adjusted at runtime ...

Due to blocking, synchronous, polling driven nature of Barebox's
serial communication handling trying to use two or more serial ports
at high (1Mbaud+) baudrates results in data loss and noticeable
perofmance degradation. This happens as soon as individual message
being sent around start exceeding HW Rx FIFO in size.

A good example of such a usecase would be using a system that has a
serdev driver (operating @ 1Mbaud+) and trying to do a X/YMODEM
transfer via serial console at comparable baudrates.

To at least partially ameliorate the problem, add code that will
expose "polling_interval" as a parameter, so that the user would have
an option of temporarily disabling (or significatly decreasing the
rate) of a given serdev's polling.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

serdev: Add trivial blocking read function ...

Add example implementation of a trivial blocking read function as a
part of Barebox's serdev API.

NOTE: This code has not been tested against real devices, so use it at
your own risk.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

console: Add simplified 'serdev' framework from Linux kernel ...

Port 'serdev' UART-slave deivce framework found in recent Linux
kernels (post 4.13) in order to be able to port 'serdev' slave drivers
from Linux.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

bootsource: Add BOOTSOURCE_CAN ...

Add BOOTSOURCE_CAN for SoCs that can boot from CAN interface.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

common: state: Add property to protect existing data ...

After an update to a newer barebox version with an enabled state
framework, existing data in storage memories could be overwritten.

Add a new property to check in front of every write task, if the meta
magic field only contains the magic number, zeros or ones.

Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/misc'

Merge branch 'for-next/fs'

rename file_operations -> cdev_operations ...

Linux also has struct file_operations which are something different.
Rename our file_operations to cdev_operations which better matches
what we have.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

bootm: provide handlers the start of the OS image ...

The bootm code needs to read the beginning of the OS image in order to
determine the filetype. If it does so already, then we can provide the
handlers the buffer. This can help the handlers to find some image
metadata before loading the full image.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

common: Add functions to find free RAM ...

The bootm code needs to put the Kernel image and initrd into free
RAM. Add some functions to find free RAM chunks to help this code.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

filetype: Detect ARM aarch64 Linux images ...

ARM aarch64 Linux image have a special type. Allow to detect them.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: aarch64: Add relocation support ...

This adds aarch64 support for relocating binaries linked with -pie.

Support is integrated into the already exisiting
relocate_to_current_adr() function which is now used for both arm32
and aarch64.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: Pass barebox version to kernel ...

Pass the barebox version to Linux in case somebody is interested in it
under Linux. We use put the version under /chosen/barebox-version and
it can be read under Linux in /sys/firmware/devicetree/base/chosen/barebox-version.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Revert "startup: Load default environment earlier" ...

Several boards use defaultenv_append_directory() to append a board
specific envfs snippet during runtime. This only works when
defaultenv_append_directory() is called before defaultenv_load() is
exectuted. Since that was executed at the end of the start process
every initcall level could be used to append a env directory. With this
patch only initcall levels earlier than fsdevice_initcall work and
most boards do not cope with this.

Revert this patch until a better solution is found.

Reported-by: Alexander Kurz <akurz@blala.de>

This reverts commit 5b92cfc.

Merge branch 'for-next/ratp'

Merge branch 'for-next/misc'

Merge branch 'for-next/fastboot'

ratp: new reset command ...

E.g.:
    $ ./bbremote -v --port /dev/ttyUSB2 reset

Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ratp: new md and mw commands ...

This commit introduces support for running the md and mw commands
using the binary interface provided by RATP. This allows clients to
read and write memory files without needing to do custom string
parsing on the data returned by the console 'md' and 'mw' operations.

The request and response messages used for these new operations are
structured in the same way:

 * An initial fixed-sized section includes the fixed-sized
   variables (e.g. integers), as well as the size and offset of the
   variable-length variables.

 * After the initial fixed-sized section, the buffer is given, which
   contains the variable-length variables in the offsets previously
   defined and with the size previously defined.

The message also defines separately the offset of the buffer
w.r.t. the start of the message. The endpoint reading the message will
use this information to decide where the buffer starts. This allows to
extend the message format in the future without needing to break the
message API, as new fields can be appended to the fixed-sized section
as long as the buffer offset is also updated to report the new
position of the buffer.

E.g.:
    $ ./bbremote --port /dev/ttyUSB2 md /dev/pic_eeprom_rdu 0x107 5
    0000000000

    $ ./bbremote --port /dev/ttyUSB2 mw /dev/pic_eeprom_rdu 0x107 0102030405
    5 bytes written

    $ ./bbremote --port /dev/ttyUSB2 md /dev/pic_eeprom_rdu 0x107 5
    0102030405

    $ ./bbremote --port /dev/ttyUSB2 mw /dev/pic_eeprom_rdu 0x107 0000000000
    5 bytes written

    $ ./bbremote --port /dev/ttyUSB2 md /dev/pic_eeprom_rdu 0x107 5
    0000000000

Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ratp: use xstrndup() instead of a custom xmemdup_add_zero() ...

The console operations done via RATP expect strings, so just use
xstrndup() instead of defining a custom method.

Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ratp: implement getenv as a standard ratp command ...

Also, use xstrndup() instead of the custom xmemdup_add_zero() as we're
working with strings anyway.

Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ratp: implement ping as a standard ratp command ...

Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ratp: allow building without full console support ...

Make CONFIG_RATP a selectable config option, so that the user can
enable RATP support without explicitly needing to enable the full
console support over RATP (e.g. only for RATP FS or built-in command
support).

The full console can still be explicitly enabled with
CONFIG_CONSOLE_RATP.

Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>