serial: lpuart: Avoid division by zero when requested baudrate is ...

With serdev device support added there's now a corner case where:

 1. There is a DT node for a serdev device on one of the UARTs
 2. There is no driver that binds against serdev device's compatibility
    string

with 1 and 2 being true it is possible to end up in a situation where
a particualr UART has not been initalized to any baudrate when
clock_notifier_call_chain() gets called. This effectively translates
to

	set_baudrate(uart, 0);

which for LPUART driver result in a division by zero.

To avoid this problem, convert lpuart_serial_setbaudrate() to treat
zero baudrate as a request to disable the UART. While we are at it add
a BUG_ON() to lpuart_setbrg() to simplify finding any future bugs.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

serial: i.MX: Add i.MX8 support ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/serdev'

serial: Drop .remove functions from all drivers ...

Depending on specifics, some 'serdev' devices might need prevent
parent console device from being removed and corresponding memory
deallocated to properly function until the very end of Barebox's
execution. An example of such a use-case would be a reset handler
relying on a serdev device for transport.

To avoid having to develop complicatione reference counting/ownership
scheme drop all of the code that calls console_unregister() and frees
the memory effectively making the problem above impossible to arise.

All of the de-initialization that serial drivers were doing in their
.remove functions was somewhat superflous anyway, so this change
should be pretty harmless.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

console: Add simplified 'serdev' framework from Linux kernel ...

Port 'serdev' UART-slave deivce framework found in recent Linux
kernels (post 4.13) in order to be able to port 'serdev' slave drivers
from Linux.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

serial/lpuart: Do not enable UART FIFO ...

Using FIFO in LPUART results in subtle serial input draining issues
which are quite difficult to reproduce and troubleshoot. Since the
change offered only moderate performance gain revert the code to
operate in no-FIFO mode to avoid FIFO-related problems alltogether.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

serial: ns16550: provide big-endian support ...

we need it at least for QCA AR9344

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

serial: ns16550: emit an error message if getting the clock fails ...

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

sandbox: fix registering multiple consoles ...

Consoles need to be registered with the "console" device name so that
they are probed by the correct driver. The barebox_register_console()
was already forcing this as it was overwriting the name that was being
passed as argument, but it was failing to provide a unique id for
each new console, so the underlying register_device() would just
return an error when wanting to re-register a device with device name
"console" and id 0.

We remove the unused name parameter from barebox_register_console() as
it is really nowhere used, and also specify DEVICE_ID_DYNAMIC as id,
so that a new unique device id is given to each newly registered
console device.

Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

serial: atmel: Add DT compatibility table ...

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/efi'

serial: atmel: Check result of clk_get() ...

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

efi: add serial driver support ...

So now we can stop to use the efi-stdio as this driver
print on the Framebuffer and the serial at the same time.

This is specially usefull if we want to use the framebuffer via efi-gop for
something else.

Do not forget to disable the efi-stdio device before enabling the console
otherwise you will get double printing.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

efi: move x86 efi boot support to x86 arch ...

prepare to drop the efi arch as efi boot up is not arch sepecific

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

efi: move bus driver to driver/efi ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/imx'

Merge branch 'for-next/efi'

serial: ns16550: Set read/write functions depending on reg-io-width ...

Set proper register read/write functions depending on reg-io-width
device tree property.

Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

serial: efi: improve input handling ...

0x08 is the scan-code for 'backspace' not 'delete'.
0x17 indicates the start of an escape sequence, such as "[3~" for
'delete'.

Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

serial: i.MX: add i.MX7 support ...

Signed-off-by Juergen Borleis <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

serial: i.MX: Enable clock ...

For architectures which do not enable all clocks during initialization.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

i.MX: Add 'lpuart' serial driver ...

Add 'lpuart' serial driver, based on analogous driver from U-Boot

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

serial: i.MX: Add i.MX6ul support ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

serial: arm_dcc: depend on !CPU_V8 ...

The DCC console uses coprocessor registers registers accesses, the
implementation of those for ARMv8 is currently missing.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/include-pdata'

serial_auart: make dt aware ...

This allows to instantiate devices from an oftree and so allows
to select the console using /chosen/stdout-path.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

include: Move ns16550 serial platform_data to include/platform_data ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/driver'

driver: replace dev_request_mem_region with dev_request_mem_resource ...

dev_request_mem_region doesn't work properly one some SoCs on which
PTR_ERR() values clash with valid return values from dev_request_mem_region.
Replace them with dev_request_mem_resource where possible.

This patch has been generated with the following semantic patch:

// <smpl>
@@
expression d;
expression n;
expression io;
identifier func;
@@
func(...) {
+struct resource *iores;
<+...
-io = dev_request_mem_region(d, n);
-if (IS_ERR(io)) {
+iores = dev_request_mem_resource(d, n);
+if (IS_ERR(iores)) {
...
-	return PTR_ERR(io);
-}
+	return PTR_ERR(iores);
+}
+io = IOMEM(iores->start);
...+>
}

@@
expression d;
expression n;
expression io;
identifier func;
@@
func(...) {
+struct resource *iores;
<+...
-io = dev_request_mem_region(d, n);
-if (IS_ERR(io)) {
+iores = dev_request_mem_resource(d, n);
+if (IS_ERR(iores))
-	return PTR_ERR(io);
-}
+	return PTR_ERR(iores);
+io = IOMEM(iores->start);
...+>
}

@@
expression d;
expression n;
expression io;
identifier func;
@@
func(...) {
+struct resource *iores;
<+...
-io = dev_request_mem_region(d, n);
-if (IS_ERR(io)) {
-	ret = PTR_ERR(io);
+iores = dev_request_mem_resource(d, n);
+if (IS_ERR(iores)) {
+	ret = PTR_ERR(iores);
...
}
+io = IOMEM(iores->start);
...+>
}

@@
expression d;
expression n;
expression io;
identifier func;
@@
func(...) {
+struct resource *iores;
<+...
-io = dev_request_mem_region(d, n);
+iores = dev_request_mem_resource(d, n);
+if (IS_ERR(iores))
+	return PTR_ERR(iores);
+io = IOMEM(iores->start);
...+>
}

@@
identifier func;
@@
func(...) {
<+...
struct resource *iores;
-struct resource *iores;
...+>
}
// </smpl>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

serial: imx: Support DTE mode ...

Based on Kernel commit 20ff2fe60a: serial: imx: add support for DTE mode

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>