GitBucket
GitBucket
| 2018-01-17 |
at91sam9263ek: enable DT support
...
Add at91sam9263ek.dts to build.
Include mmc1 in at91sam9263ek.dts, as mmc1 is what the evaluation
kit uses for the SD card.
Add DT specific of_init
Adjust build to drop non-DT files from mach-at91
RomBOOT
>AT91Bootstrap 3.0.1
patch-0.8 64MB Ram
Load from SD-Card
Loading from SD-Card
Open: u-boot.bin
Loading from SD-Card - Success
barebox 2017.12.0-00036-gda46de29e #23 Sun Dec 31 09:15:39 CET 2017
Board: Atmel at91sam9263ek
gpio-at91 fffff200.gpio: AT91 gpio driver registered
gpio-at91 fffff400.gpio: AT91 gpio driver registered
gpio-at91 fffff600.gpio: AT91 gpio driver registered
gpio-at91 fffff800.gpio: AT91 gpio driver registered
gpio-at91 fffffa00.gpio: AT91 gpio driver registered
pinctrl-at91 pinctrl.2: AT91 pinctrl registered
AT91: Detected soc type: at91sam9263
AT91: Detected soc subtype: Unknown
mdio_bus: miibus0: probed
macb fffbc000.ethernet: Cadence MACB at 0xfffbc000
at91_udc fff78000.gadget: at91_udc version 3 May 2006
atmel_mci fff80000.mmc: version: 0x210
atmel_mci fff80000.mmc: registered as fff80000.mmc
atmel_mci fff84000.mmc: version: 0x210
atmel_mci fff84000.mmc: registered as fff84000.mmc
malloc space: 0x239fab00 -> 0x23dfaaff (size 4 MiB)
barebox-environment environment.6: probe failed: No such device
environment load /dev/env0: No such file or directory
Maybe you have to create the partition.
running /env/bin/init...
\e[?25h
Hit any key to stop autoboot: 3
barebox@Atmel at91sam9263ek:/ iomem
0x00000000 - 0xffffffff (size 0x00000000) iomem
0x00300000 - 0x00313fff (size 0x00014000) 300000.sram
0x00500000 - 0x00503fff (size 0x00004000) 500000.sram
0x00700000 - 0x00700fff (size 0x00001000) 700000.fb
0x20000000 - 0x23ffffff (size 0x04000000) ram0
0x239fab00 - 0x23dfaaff (size 0x00400000) malloc space
0x23dfab00 - 0x23dfffe2 (size 0x000054e3) board data
0x23e00000 - 0x23e53cc8 (size 0x00053cc9) barebox
0x23e53cc9 - 0x23e6404f (size 0x00010387) barebox data
0x23e64050 - 0x23e6754b (size 0x000034fc) bss
0x23fe4000 - 0x23fe7fff (size 0x00004000) ttb
0x23fe8000 - 0x23feffff (size 0x00008000) stack
0xfff78000 - 0xfff7bfff (size 0x00004000) fff78000.gadget
0xfff80000 - 0xfff805ff (size 0x00000600) fff80000.mmc
0xfff84000 - 0xfff845ff (size 0x00000600) fff84000.mmc
0xfff8c000 - 0xfff8c1ff (size 0x00000200) fff8c000.serial
0xfffbc000 - 0xfffbc0ff (size 0x00000100) fffbc000.ethernet
0xffffee00 - 0xffffefff (size 0x00000200) ffffee00.serial
0xfffff200 - 0xfffff3ff (size 0x00000200) fffff200.gpio
0xfffff400 - 0xfffff5ff (size 0x00000200) fffff400.gpio
0xfffff600 - 0xfffff7ff (size 0x00000200) fffff600.gpio
0xfffff800 - 0xfffff9ff (size 0x00000200) fffff800.gpio
0xfffffa00 - 0xfffffbff (size 0x00000200) fffffa00.gpio
0xfffffd30 - 0xfffffd3e (size 0x0000000f) fffffd30.timer
barebox@Atmel at91sam9263ek:/ devinfo
`-- global
`-- nv
`-- platform
`-- mem0
`-- 0x00000000-0x03ffffff ( 64 MiB): /dev/ram0
`-- 300000.sram
`-- 0x00000000-0x00013fff ( 80 KiB): /dev/sram0
`-- 500000.sram
`-- 0x00000000-0x00003fff ( 16 KiB): /dev/sram1
`-- ahb.0
`-- apb.1
`-- fffff000.interrupt-controller
`-- fffffc00.pmc
`-- ffffe200.ramc
`-- ffffe400.smc
`-- ffffe800.ramc
`-- ffffea00.smc
`-- ffffec00.matrix
`-- fffffd30.timer
`-- fff7c000.timer
`-- fffffd00.rstc
`-- fffffd10.shdwc
`-- pinctrl.2
`-- fffff200.gpio
`-- fffff400.gpio
`-- fffff600.gpio
`-- fffff800.gpio
`-- fffffa00.gpio
`-- ffffee00.serial
`-- cs0
`-- 0x00000000-0xffffffffffffffff ( 0 Bytes): /dev/cs0
`-- fff8c000.serial
`-- cs1
`-- 0x00000000-0xffffffffffffffff ( 0 Bytes): /dev/cs1
`-- fffbc000.ethernet
`-- miibus0
`-- eth0
`-- fff78000.gadget
`-- usbgadget
`-- fff80000.mmc
`-- mci0
`-- fff84000.mmc
`-- mci1
`-- fffffd40.watchdog
`-- fffa4000.spi
`-- fffac000.can
`-- 700000.fb
`-- a00000.ohci
`-- 10000000.ebi
`-- i2c-gpio-0.3
`-- leds.4
`-- gpio_keys.5
`-- cs2
`-- 0x00000000-0xffffffffffffffff ( 0 Bytes): /dev/cs2
`-- soc
`-- mem1
`-- 0x00000000-0xfffffffe ( 4 GiB): /dev/mem
`-- environment.6
`-- mdio_bus
`-- fs
`-- ramfs0
`-- devfs0
`-- net
`-- udc0
`-- fb0
`-- 0x00000000-0x000257ff ( 150 KiB): /dev/fb0
barebox@Atmel at91sam9263ek:/ drvinfo
Driver Device(s)
--------------------
syscon
at91-pit
fffffd30.timer
gpio-at91
fffff200.gpio
fffff400.gpio
fffff600.gpio
fffff800.gpio
fffffa00.gpio
pinctrl-at91
pinctrl.2
atmel_usart
ffffee00.serial
fff8c000.serial
ramfs
ramfs0
devfs
devfs0
fat
tftp
at91sam9-smc
Generic PHY
macb
fffbc000.ethernet
atmel_nand
cfi_flash
at91_udc
fff78000.gadget
atmel_mci
fff80000.mmc
fff84000.mmc
atmel_lcdfb
700000.fb
gpio-leds
leds.4
gpio_keys
gpio_keys.5
mmio-sram
300000.sram
500000.sram
mem
mem0
mem1
barebox-environment
Use 'devinfo DEVICE' for more information
barebox@Atmel at91sam9263ek:/ gpioinfo
GPIOs 0-31, chip fffff200.gpio:
dir val requested label
GPIO 0: unk hi false
GPIO 1: unk hi false
GPIO 2: in hi false
GPIO 3: unk hi false
GPIO 4: unk hi false
GPIO 5: unk hi false
GPIO 6: unk lo false
GPIO 7: unk hi false
GPIO 8: unk hi false
GPIO 9: unk hi false
GPIO 10: unk hi false
GPIO 11: unk hi false
GPIO 12: unk hi false
GPIO 13: in hi false
GPIO 14: in hi false
GPIO 15: in hi false
GPIO 16: in hi false
GPIO 17: in hi false
GPIO 18: in hi false
GPIO 19: in lo false
GPIO 20: in hi false
GPIO 21: in hi false
GPIO 22: in hi false
GPIO 23: in hi false
GPIO 24: in hi false
GPIO 25: in lo true udc_vbus
GPIO 26: unk hi false
GPIO 27: unk hi false
GPIO 28: unk hi false
GPIO 29: unk hi false
GPIO 30: in lo false
GPIO 31: in hi false
GPIOs 32-63, chip fffff400.gpio:
dir val requested label
GPIO 32: in hi false
GPIO 33: in hi false
GPIO 34: in hi false
GPIO 35: in hi false
GPIO 36: in hi false
GPIO 37: in hi false
GPIO 38: in hi false
GPIO 39: out hi true d3
GPIO 40: in hi false
GPIO 41: unk hi false
GPIO 42: in hi false
GPIO 43: in hi false
GPIO 44: in hi false
GPIO 45: in hi false
GPIO 46: in hi false
GPIO 47: in hi false
GPIO 48: in hi false
GPIO 49: in hi false
GPIO 50: in hi false
GPIO 51: in hi false
GPIO 52: in hi false
GPIO 53: in hi false
GPIO 54: in hi false
GPIO 55: in hi false
GPIO 56: in hi false
GPIO 57: in hi false
GPIO 58: in hi false
GPIO 59: out lo active low PHY 50 MHz oscillator
GPIO 60: in hi false
GPIO 61: in hi false
GPIO 62: in hi false
GPIO 63: in hi false
GPIOs 64-95, chip fffff600.gpio:
dir val requested label
GPIO 64: in hi false
GPIO 65: unk hi false
GPIO 66: unk hi false
GPIO 67: unk hi false
GPIO 68: in hi true gpio_keys
GPIO 69: in hi true gpio_keys
GPIO 70: unk lo false
GPIO 71: unk lo false
GPIO 72: unk lo false
GPIO 73: unk lo false
GPIO 74: unk lo false
GPIO 75: unk lo false
GPIO 76: unk lo false
GPIO 77: in hi false
GPIO 78: unk lo false
GPIO 79: unk lo false
GPIO 80: unk lo false
GPIO 81: unk lo false
GPIO 82: unk lo false
GPIO 83: unk lo false
GPIO 84: in hi false
GPIO 85: in hi false
GPIO 86: unk lo false
GPIO 87: unk lo false
GPIO 88: unk lo false
GPIO 89: unk lo false
GPIO 90: unk lo false
GPIO 91: unk lo false
GPIO 92: in hi false
GPIO 93: in hi true d2
GPIO 94: unk hi false
GPIO 95: unk hi false
GPIOs 96-127, chip fffff800.gpio:
dir val requested label
GPIO 96: in hi false
GPIO 97: in hi false
GPIO 98: in hi false
GPIO 99: in hi false
GPIO 100: in hi false
GPIO 101: in hi false
GPIO 102: in hi false
GPIO 103: in hi false
GPIO 104: in hi false
GPIO 105: in hi false
GPIO 106: in hi false
GPIO 107: in hi false
GPIO 108: unk lo false
GPIO 109: unk lo false
GPIO 110: unk lo false
GPIO 111: in hi false
GPIO 112: unk lo false
GPIO 113: unk hi false
GPIO 114: unk hi false
GPIO 115: unk lo false
GPIO 116: unk hi false
GPIO 117: unk hi false
GPIO 118: unk hi false
GPIO 119: unk hi false
GPIO 120: unk lo false
GPIO 121: unk hi false
GPIO 122: unk hi false
GPIO 123: unk lo false
GPIO 124: unk hi false
GPIO 125: unk hi false
GPIO 126: unk hi false
GPIO 127: unk hi false
GPIOs 128-159, chip fffffa00.gpio:
dir val requested label
GPIO 128: in hi false
GPIO 129: in hi false
GPIO 130: in hi false
GPIO 131: in hi false
GPIO 132: in hi false
GPIO 133: in hi false
GPIO 134: in hi false
GPIO 135: in hi false
GPIO 136: in hi false
GPIO 137: in hi false
GPIO 138: in hi false
GPIO 139: in hi false
GPIO 140: in hi false
GPIO 141: in hi false
GPIO 142: in hi false
GPIO 143: in hi false
GPIO 144: in hi false
GPIO 145: in hi false
GPIO 146: in lo true mci_cd
GPIO 147: in hi false
GPIO 148: in hi false
GPIO 149: unk lo false
GPIO 150: in hi false
GPIO 151: unk lo false
GPIO 152: unk lo false
GPIO 153: unk lo false
GPIO 154: unk lo false
GPIO 155: unk lo false
GPIO 156: unk lo false
GPIO 157: unk lo false
GPIO 158: unk hi false
GPIO 159: in hi false
barebox@Atmel at91sam9263ek:/ clk_dump
slow_xtal (rate 32768, enabled)
prog0 (rate 32768, enabled)
pck0 (rate 32768, disabled)
prog1 (rate 32768, enabled)
pck1 (rate 32768, disabled)
prog2 (rate 32768, enabled)
pck2 (rate 32768, disabled)
prog3 (rate 32768, enabled)
pck3 (rate 32768, disabled)
main_xtal (rate 16367660, enabled)
main_osc (rate 16367660, enabled)
mainck (rate 16367660, enabled)
pllbck (rate 98205960, enabled)
usbck (rate 49102980, enabled)
uhpck (rate 49102980, disabled)
udpck (rate 49102980, disabled)
pllack (rate 204595750, enabled)
masterck (rate 102297875, enabled)
pioA_clk (rate 102297875, enabled)
pioB_clk (rate 102297875, enabled)
pioCDE_clk (rate 102297875, enabled)
usart0_clk (rate 102297875, enabled)
usart1_clk (rate 102297875, disabled)
usart2_clk (rate 102297875, disabled)
mci0_clk (rate 102297875, disabled)
mci1_clk (rate 102297875, disabled)
can_clk (rate 102297875, disabled)
twi0_clk (rate 102297875, disabled)
spi0_clk (rate 102297875, disabled)
spi1_clk (rate 102297875, disabled)
ssc0_clk (rate 102297875, disabled)
ssc1_clk (rate 102297875, disabled)
ac97_clk (rate 102297875, disabled)
tcb_clk (rate 102297875, disabled)
pwm_clk (rate 102297875, disabled)
macb0_clk (rate 102297875, enabled)
g2de_clk (rate 102297875, disabled)
udc_clk (rate 102297875, disabled)
isi_clk (rate 102297875, disabled)
lcd_clk (rate 102297875, enabled)
dma_clk (rate 102297875, disabled)
ohci_clk (rate 102297875, disabled)
barebox@Atmel at91sam9263ek:/ led
registered LEDs:
0 : name: d3 max_value: 1
1 : name: d2 max_value: 1
barebox@Atmel at91sam9263ek:/ led 1 1
barebox@Atmel at91sam9263ek:/ led 0 1
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sam Ravnborg
authored
on 15 Jan 2018
Sascha Hauer
committed
on 17 Jan 2018
|
|---|---|
| 2017-04-19 |
ARM: at91sam9x5ek: Actually build image
...
The Kconfig variable is named CONFIG_MACH_AT91SAM9X5EK, not MACH_AT91SAM9X5EK. Reported-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
committed
on 19 Apr 2017
|
| 2017-03-30 |
at91sam9x5ek: Convert to mult-image build
...
Convert AT91SAM9X5-EK board code to multi-image build process, similar to how majority of i.MX board code is built. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Andrey Smirnov
authored
on 23 Mar 2017
Sascha Hauer
committed
on 30 Mar 2017
|