LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

History for barebox / arch

2018-11-29	b1d84f7 Browse files » multiple/raspberry-pi: fix clkdevs for raspberry pi ... Commit `7e497d4` introduced a name change which breaks support for the fixed clkdev for uart and sdhci for RPI. Use clkdev_add_physbase instead to be independant from the device tree names. Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Rouven Czerwinski authored on 27 Nov 2018 Sascha Hauer committed on 29 Nov 2018
2018-11-16	475eac0 Browse files » ARM: i.MX: When SRSR shows wdog then lookup reset source in wdog ... On i.MX6 when the watchdog has resetted the system then the SRSR register correctly shows that the watchdog has resetted the system. This is not the desired result though, a "reset" in barebox or "reboot" in Linux should result in "RST" as reset source. So instead of making the SRSR register value overwrite the reset source read from the watchdog registers, interpret the SRSR value corresponding to watchdog reset as "lookup details in the watchdog registers". Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: Andrey Smirnov <andrew.smirnov@gmail.com> Sascha Hauer committed on 16 Nov 2018
2018-11-16	9b14a8b Browse files » arm: mach-omap: xload: Enable network interface ... Since f0624a701513 ("net: Do not route traffic to interfaces that are not up") interfaces need to be "up" before used. To make enthernet boot work again enable the interface after dhcp is set up. Signed-off-by: Teresa Remmet <t.remmet@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Teresa Remmet authored on 14 Nov 2018 Sascha Hauer committed on 16 Nov 2018
2018-11-09	a1fc81a Browse files » Merge branch 'for-next/socfpga' Sascha Hauer committed on 9 Nov 2018
	c9a2ebb Browse files » Merge branch 'for-next/rpi3' Sascha Hauer committed on 9 Nov 2018
	227426f Browse files » Merge branch 'for-next/net-switch-mv88e6xxx' Sascha Hauer committed on 9 Nov 2018
	9a8f531 Browse files » Merge branch 'for-next/missing-prototypes' Sascha Hauer committed on 9 Nov 2018
	98c31d3 Browse files » Merge branch 'for-next/imx' Sascha Hauer committed on 9 Nov 2018
	5576a02 Browse files » Merge branch 'for-next/gpio' Sascha Hauer committed on 9 Nov 2018
	e61cca2 Browse files » Merge branch 'for-next/dts' Sascha Hauer committed on 9 Nov 2018
	5200ea0 Browse files » ARM: nxp-imx8mq-evk: add barebox and env partitions ... So we can have a persistent env and a bit safer barebox update. Also switch the environment and update default depending on the bootsource, as this is really helpful on an eval board where one might want to have totally different systems on eMMC and SD card. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 6 Nov 2018 Sascha Hauer committed on 9 Nov 2018
	5ac0ca4 Browse files » ARM: nxp-imx8mq-evk: remove SDRAM reservation for ATF ... Recent versions of the i.MX8MQ ATF (like the one shipped with Barebox) reside in a part of OCRAM, so there is no need to reserve any part of SDRAM anymore. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 6 Nov 2018 Sascha Hauer committed on 9 Nov 2018
	51ac896 Browse files » ARM: i.MX: Add liteboard support ... liteboard is a development board which uses liteSOM as its base. liteSOM can't exist on its own, but is used as part of other boards - it only contains processor and memory. Hardware specification: * liteSOM: - i.MX6UL - 256M or 512M DDR3 RAM - eMMC (uSDHC2) * Ethernet PHY * USB host (usb_otg1) * MicroSD slot (uSDHC1) Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Marcin Niestroj authored on 8 Nov 2018 Sascha Hauer committed on 9 Nov 2018
2018-11-08	646d1a0 Browse files » dts: update to v4.20-rc1 ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 8 Nov 2018
2018-11-06	5a054ae Browse files » ARM: rdu1: Implement RDU1 config loading ... RDU1 stores various configuration parameters, including FEC's MAC address, in a configuration blob that can be located in on of three places: SPI NOR, RAVE SP EEPROM or Microwire EEPROM. This patch add an initcall to load those configuration variables from a valid source (CRC8 checked) as well as expose then as "config_<var>" environment variables. This patch also adds appropriate code to register MAC address obtained from config blob. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 5 Nov 2018 Sascha Hauer committed on 6 Nov 2018
	1ee6ad7 Browse files » ARM: rdu1: Add an alias for Microwire EEPROM ... Add an alias for Microwire EEPROM to give it a better name in /dev. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 5 Nov 2018 Sascha Hauer committed on 6 Nov 2018
	c16bcbc Browse files » ARM: at91: remove unused defines ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 6 Nov 2018
	a698137 Browse files » ARM: at91: separate restart handler registration into SoC specific code ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 6 Nov 2018
	30f4a93 Browse files » ARM: at91: make at91sam926x_board_init board specific ... The base addresses used in at91sam926x_board_init() differ with each SoC. The board knows which SoC we are running on though, so create and use SoC specific variants of these functions which pass the appropriate base addresses to at91sam926x_board_init(). Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 6 Nov 2018
	e08031d Browse files » ARM: at91: drop at91_pmc_write()/at91_pmc_read() ... at91_pmc_write() and at91_pmc_read() need a compile time base address, so remove them. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 6 Nov 2018
	edd34f7 Browse files » ARM: at91rm9200ek: use plain readl/writel for pmc accesses ... at91_pmc_write() needs a compile time base address, so rather use plain read/writel. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 6 Nov 2018
	f3e537c Browse files » ARM: at91sam926x use writel rather than pmc accessor function ... The pmc accessor function depends on a compile time base address, so rather use writel directly. In this case we can hardcode the base address again since all at91sam926x SoCs have the same pmc base address. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 6 Nov 2018
	393bba8 Browse files » ARM: at91: remove mach/io.h ... Remove at91_sys_read() and at91_sys_write() since these are no longer used. This makes mach/io.h empty so remove that aswell. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 6 Nov 2018
	f0d8a2e Browse files » ARM: at91rm9200 timer: Make system timer defines SoC specific ... - rename at91_st.h to at91rm9200_st.h - rename prefix from AT91_ to AT91RM9200_ - remove register offset from System timer defines Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 6 Nov 2018
	f8e1e84 Browse files » ARM: at91rm9200 timer: remove unused include ... at91rm9200_time.c doesn't need anything from at91_pmc.h, remove the inclusion. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 6 Nov 2018
	8e04cee Browse files » ARM: at91: remove unused header file ... nothing from mach/at91_tc.h is used, remove it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 6 Nov 2018
	99b0114 Browse files » ARM: at91rm9200: Add SoC namespace to memory controller defines ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 6 Nov 2018
	c67ac51 Browse files » ARM: at91: Use SoC specific base addresses where appropriate ... Replace AT91_ base addresses with their SoC specific variants where possible. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 6 Nov 2018
	adc44f5 Browse files » ARM: socfpga: socrates: convert to lowlevel helpers ... Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Steffen Trumtrar authored on 2 Nov 2018 Sascha Hauer committed on 6 Nov 2018
	d5f1385 Browse files » ARM: socfpga: socdk: convert to lowlevel helpers ... Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Steffen Trumtrar authored on 2 Nov 2018 Sascha Hauer committed on 6 Nov 2018