documentation: document eMMC boot{0,1}-partitions binding ...

The described binding was implemented in commit 6e9a87b39
("mci: Allow to partition eMMC boot partitions").

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: dts: remove @0 from environment nodes ...

The environment nodes do not have a reg property and as such should not
have a @0 suffix. Newer dtc warns about this, so remove it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

common: state: Add property to protect existing data ...

After an update to a newer barebox version with an enabled state
framework, existing data in storage memories could be overwritten.

Add a new property to check in front of every write task, if the meta
magic field only contains the magic number, zeros or ones.

Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

state: Documentation: Fix typo ...

underlaying -> underlying

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

state: Documentation: fix typo ...

Signed-off-by: Ulrich Ölmann <u.oelmann@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/misc'

Documentation: remove :numbered: from lower level toctrees ...

Only the highest level toctree may have :numbered:, otherwise
sphinxs complains loudly that the subtree is already numbered.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation: Change many code blocks to no highlight ...

Several blocks cannot be sensibly highlighted, so change the highliting
to 'none'. Fixes many warnings in building the documentation.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation: devicetree: m25p80: fix referenced filename ...

Linux changed the filename in commit 8947e396a829 ("Documentation: dt: mtd:
replace "nor-jedec" binding with "jedec, spi-nor"") and barebox imported this
change in commit 8ed978b79062 ("dts: update to v4.1-rc4").

Signed-off-by: Ulrich Ölmann <u.oelmann@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/state'

docs/DS1307: fix layout ...

Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

state: use the given backend storage type name ...

Change 119f92b already tried to fix it, but
forgets the 'direct' usecase.

The 'backend-storage-type' node is optional. Its default depends on the
capability of the used backend memory, which means "circular" or NULL.
The latter defaults to 'direct' in the routines.
If it is NULL, the devicetree fixup routine skips exporting a
'backend-storage-type' node to the kernel's devicetree.

But currently if the 'backend-storage-type' node is explicitly given as
'direct', it will be skipped silently and set to NULL instead. In this
case the user of the 'barebox-state' tool then ends up with the warning:

"No backend-storage-type found, using default"

which is annoying, because it was given.

Storing the given value will still use a NULL if the
'backend-storage-type' node isn't defined, but stores everything else if
it is defined. Then the 'backend-storage-type' node is present in the
kernel's devicetree as well.

Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

docs: rework and extend the 'state' and 'bootchooser' documentation ...

Many links between sections and examples were added to give the developer
the help to get it work.

Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

docs: remove build warning ...

This change removes:

"devicetree/bindings/rtc/dallas,ds1307.rst: WARNING: document isn't included in any toctree" warning

Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: of_path: find device via partuuid ...

When a node is compatible to a fixed-partitions, support searching the
corresponding device via the partuuid, if it specified in the device tree.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

Merge branch 'for-next/misc'

firmware: altera-serial: add support for Arria 10 ...

Make FPGA specific settings configurable (padding, spi bits per word,
delays) and add Arria 10 support. The Arria 10 compatible is the same
as in the kernel patch "fpga manager: Add altera-ps-spi driver for
Altera FPGAs" (drivers/fpga/altera-ps-spi.c). The Arria 5 compatible
works unchanged.

This patch was tested with Arria 5 and Arria 10.

Signed-off-by: Bastian Stender <bst@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

state: Fix example in documentation ...

The backend property must contain a phandle, so use a phandle
in the example.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

state: Make an alias mandatory ...

The userspace barebox-state utility gets confused when no alias exists.
Make the alias mandatory, so that people make it right^tm without having
to ask.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

state: Binding: remove @0 from node name ...

The '@0' suffix is for nodes which have a reg property, so
do not use this suffix in the state example node which does
not have a reg property.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

state: backend_circular: default to circular storage ...

Default to the new circular storage format which saves erase
cycles. The old format can still be selected with
backend-storage-type = "noncircular".

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

state: Make pointing to the backend using a phandle the only supported method ...

All other methods are broken for some time already: When starting the
kernel the state code rewrites the state node in the device tree and
replaced the "backend" property with a phandle - even when the target
can't be described as a phandle. Since using phandles is the nicest way
to point to the storage device anyway remove the other methods.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

docs: state: make string variable type clearer ...

Only fixed length strings are supported. Make the wording clearer.

Signed-off-by: Stefan Lengfeld <s.lengfeld@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

docs: Add/Update state documentation ...

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

rtc: ds1307: Add support for configuring external clock pin ...

The DS1307 has a square wave output pin, which can be used to output a
clock signal from the DS1307.  Additionally, the DS1308 supports
configuring this pin as an input from an external clock source to
which it should sync itself.

Add support with OF device tree properties to configure these
settings.  Supported features are using the clock pin as an output, an
input, the rate of the pin, and if it should be enabled on battery
backup power.

The driver does not check that the selected features are supported by
the clock chip being used.  It is the designer's responsibility to
create a valid device tree node; the bootloader does not attempt to be
a device tree validator.

Signed-off-by: Trent Piepho <tpiepho@kymetacorp.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation: m25p80: include in documentation ...

Fix this warning:

checking consistency...  [...]Documentation/devicetree/bindings/mtd/m25p80.rst:: WARNING: document isn't included in any toctree

by including the document.

Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

docs: fix typos ...

Signed-off-by: Ulrich Ölmann <u.oelmann@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

environment: Support env from file in a file-system via device tree ...

Current barebox,environment node only allows specifying a raw device or
partition to load an environment from.  Some boards, like OMAP and
SoCFPGA, instead want to use a file located in a FAT filesystem.
Extend the device tree bindings with a new property 'file-path' that
will trigger this behavior.

This allows any board using this driver to get the env from a file or
from a raw device, instead of each machine type being either raw
device only or file only.

Signed-off-by: Trent Piepho <tpiepho@kymetacorp.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

state: implement signed int support ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

state: backend_raw: add hmac support ...

This patch adds hmac support to the raw backend.

With this patch, modifications of the header or data of a state partition can
be detected, as the hmac woudln't match anymore. The hmac relies on a shared
secret, which is requested from the keystore, with keystore_get_secret() using
the name of the state partition as the "name" of the secret.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>