poweroff: Allow to register poweroff handlers ...

Allow to register handlers for poweroff. This allows to have multiple
poweroff implementations in a single binary. The implementation is close
to the restart handlers.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: PXA: move HAVE_CLK select ...

Claiming that all of PXA has CLK implemented, while only PXA3XX
selects the relevant clock implementations causes lots of build
failures for the other PXA architectures.

Fix it by moving the HAVE_CLK select to the one PXA arch, that
actually has it.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arm: pxa: Remove pxa_get_nandclk() ...

With a common clock provided for NAND controller, get rid of the
mach/clock.h way of getting the NAND clock.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arm: pxa: Prepare for NAND clkdev lookup on PXA3xx ...

To allow PXA3xx nand driver to be reused on Marvell Armada 370/XP,
prepare to provide a common clock for the NAND driver on PXA3xx.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/restart'

restart: replace reset_cpu with registered restart handlers ...

This replaces the reset_cpu() function which every SoC or board must
provide with registered handlers. This makes it possible to have multiple
reset functions for boards which have multiple ways to reset the machine.
Also boards which have no way at all to reset the machine no longer
have to provide a dummy reset_cpu() function.

The problem this solves is that some machines have external PMICs or
similar to reset the system which have to be preferred over the
internal SoC reset, because the PMIC can reset not only the SoC but also
the external devices.

To pick the right way to reset a machine each handler has a priority. The
default priority is 100 and all currently existing restart handlers are
registered with this priority. of_get_restart_priority() allows to retrieve
the priority from the device tree which makes it possible for boards to
give certain restart handlers a higher priority in order to use this one
instead of the default one.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

gpio: Drop asm-generic/gpio.h ...

Since we no longer have custom gpio function prototypes we can
drop the prototypes from asm-generic/gpio.h can add them to
include/gpio.h instead. While at it add static inline dummy wrappers
for !CONFIG_GENERIC_GPIO so that code using gpios can compile without
gpio support.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: PXA: use generic gpio prototypes ...

PXA is the only architecture that uses its own prototypes for
the gpio functions because it uses static inline variants of
these functions. For the sake of streamlining with other architectures
move them to a C file and use the generic gpio prototypes.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: pxa: move mainstone TEXTBASE to Kconfig ...

So we can drop it from the defconfig and stop bothering
the user with this choice by default.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: pxa: move lubbock TEXTBASE to Kconfig ...

So we can drop it from the defconfig and stop bothering
the user with this choice by default.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: pxa: add mainstone board support ...

Add support for the Intel XScale PXA270 development system platform.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: MIOA701: select POLLER ...

Fixes:
In function `gpio0_poweroff_probe': undefined reference to `poller_register'

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: pxa: add pxa25x support ...

Add support for the PXA25X SoC family, the oldest of the PXA serie.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: pxa: add the zylonite board ...

Add the first pxa3xx board, zylonite. Zylonite is the Marvell System
Development Platform.

Several version are available, based on either :
 - PXA300
 - PXA310
 - PXA320

This version was only tested on a PXA310 based board, and uses :
 - the ethernet controller
 - the nand controller

These drivers seem to be common to all zylonite boards.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: pxa: add pxa3xx architecture ...

Add the pxa3xx architecture, for pxa300, pxa310 and pxa320 SoCs.
This includes :
 - the registers
 - the cpu type
 - the reset source handling
 - a minimal set of clocks
 - pin control definitions
   In this last case, the big mfp-pxaxxx.h files were dropped, forcing
   board developers to use MFP_LPM_* macros cunningly.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: pxa: move pxa2xx functionality to SoC specific file ...

Move reset_source detection and poweroff to pxa2xx.c, to prepare the
incoming pxa3xx reset_source detection.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

treewide: Reuse init_clock() return value for clocksource drivers ...

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

reset_source: rename set_reset_source to reset_source_set ...

To get all reset source related functions into the same function
namespace.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: pxa: add poweroff capability ...

Add the capability for the PXA architecture to poweroff.

As there is no true poweroff, ie. the power regulator is not available
for shut off from the core, the poweroff puts the SoC into a deep sleep
mode (mode 7), where almost no current is sunk.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: pxa: add reset source detection ...

Use PXA register RCSR to detect which is the reset cause.  When
triggering a reset, clear the former reset source first.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Set model and hostname at boardlevel ...

With multiboard support the compiletime generated BOARDINFO string
gets more and more meaningless. This removes it from Kconfig and
replaces it with a variable that can be set at boardlevel.

Also many boards have a standard setting for the hostname in the
environment. This patch also moves the standard to C code by calling
barebox_set_hostname().

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: remove now unused MACH_[HAS|DO]_LOWLEVEL_INIT ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Remove bad Kconfig reference to HAVE_MMU ...

Barebox not contain symbol HAVE_MMU, so remove all references to it.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Remove bad Kconfig reference to HAS_CFI ...

Barebox not contain symbol HAS_CFI, so remove all references to it.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

pcm027: add board support ...

The pcm027 is a PXA270 based Phytec phyCORE board.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arm/mach-pxa: add mioa701 board ...

Add Mitac MioA701 board initial support.
The support provides basic boot and :
 - a console over USB (serial gadget).
 - the SD card support
 - the MTD docg3 support
 - the LCD support

Add a check in the default environment for a barebox.env
file on the first partition (FAT). If the file exists,
source it instead of the normal boot procedure.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arm/mach-pxa: add CCCR bits definitions ...

Add CCCR bits definition for PXA SoC, so that the bootloader
can setup a stable core clock frequency, which is not the
initial reset clock, as required by Intel's PXA27x Processor
family developer's guide, chapter 3.5.5, table 3.7 (clock
frequencies).

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arm/mach-pxa: add standard LCD panel GPIO settings ...

Add standard GPIO routings for LCD panels, taken from linux
kernel.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

drivers/video: remove pxafb enable on load ...

As pxafb can rely on a PWM to control backlight, and because
driver dependencies are hard to deal with, remove automatic
enable of PXAFB on probe.

The user should in its environment do a :
 - fb0.enable=1

This way, the PWM has been probed and is ready to work, and
the pxafb backlight control works.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

drivers/pwm: add PXA pulse width modulator controller ...

Add PXA embedded pulse width modulator support. The PWM can
generate signals from 49.6kHz to 1.625MHz.
The driver is for pxa2xx family. The pxa3xx was not handled yet.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>