Revert "images: Drop unnecessary fix_size" ...

This reverts commit 5c0e165.

The fix_size scripts is not necessary for newer ARM toolchains,
it is however necessary for the older ARM toolchains (gcc-5 and older).

The original reason to drop fix_size was that it doesn't work on MIPS.
With this patch we add the -i flag so that we ignore unknown images
and can succesfully build MIPS images.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

images: check for use of obsolete pblx-* ...

pblx-* has been removed in 5a1a5ed253 ("ARM: images: use piggydata")
and using it (e.g. because a patchset was rebased) results in a non-obvious:

	make[1]: *** No rule to make target 'images/*.pblx.*', \
	needed by 'images/barebox-*.img'.  Stop.

Avoid this by explicitly failing with an error message whenever pblx-y
or pblx- has been defined.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

images: pblx is now pblb ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

images: Drop unnecessary fix_size ...

Now that we compile the compressed binary into the decompressor we
no longer need fix_size but can use the linker to fill in the image
size into the binary.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/ultrascale'

Merge branch 'for-next/mips'

Merge branch 'for-next/kconfig'

Merge branch 'for-next/imx'

Merge branch 'for-next/am35xx'

ARM: omap: Add board support for WAGO pfc200 platform ...

This adds support for the AM3517 based WAGO pfc200 SPS.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: CCMX51: Switch to multiimage support ...

This is a cumulative patch for the Digi ConnectCore CCMX51 SOM.
It includes:
- Switch board to devicetree probe.
- Add MMC update handler.
- Switch to multiimage support.
- Cleanup and optimize board code.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

kbuild: add .SECONDARY special target ...

Based on the following Linux commits:

 - 54a702f70589 ("kbuild: mark $(targets) as .SECONDARY and remove
   .PRECIOUS markers")

 - 8e9b61b293d9 ("kbuild: move .SECONDARY special target to
   Kbuild.include")

This consolidates those two commits and adjusts commit log for barebox.

GNU Make automatically deletes intermediate files that are updated
in a chain of pattern rules.

Example 1) %.dtb.o <- %.dtb.S <- %.dtb <- %.dts
Example 2) %.o <- %.c <- %.c_shipped

arch/arm/crypto/Makefile marks such targets as .PRECIOUS to prevent Make
from deleting them, but the correct way is to use .SECONDARY.

  .SECONDARY
    Prerequisites of this special target are treated as intermediate
    files but are never automatically deleted.

  .PRECIOUS
    When make is interrupted during execution, it may delete the target
    file it is updating if the file was modified since make started.
    If you mark the file as precious, make will never delete the file
    if interrupted.

Both can avoid deletion of intermediate files, but the difference is
the behavior when Make is interrupted; .SECONDARY deletes the target,
but .PRECIOUS does not.

The use of .PRECIOUS is relatively rare since we do not want to keep
partially constructed (possibly corrupted) targets.

.SECONDARY with no prerequisites causes all targets to be treated as
secondary. This agrees the policy of Kbuild.

scripts/Kbuild.include seems a suitable place to add it because it is
included from almost all sub-makes.

I deleted 'SECONDARY' (no dot) from images/Makefile, which I guess
a typo.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

images: fix force rebuild of piggy.o ...

piggy.o would be build for every time barebox was built
This had the sideeffect that the image(s) would
always be rebuilt despite no changes

Fix this by adding piggy.o to targets
and avoid an extra command in the rule to create .pblb files

The patch includes the removal of a stray assignment

Fixes: 5a1a5ed253 ("ARM: images: use piggydata")
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Images: Add image size to built images ...

This brings back the image size written into the built images which got
lost in the conversion to using piggydata in the PBL images.

Fixes: 5a1a5ed253 ("ARM: images: use piggydata")

Reported-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Teresa Remmet <t.remmet@phytec.de>

MIPS: port all mach* to multiimage ...

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

images: piggy: use "a" instead of #alloc flag ...

"#alloc" is not working with MIPS compiler. The "a" variant
seems to be more generic and works with ARM and MIPS.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

phycard-imx27: add support for 64MB RAM variants ...

Some older pca100 boards were available with 64MB RAM. The chips
require a slightly different sdram controller initialization. Support
this by building bootloader images for both variants.

Signed-off-by: Florian Bäuerle <florian.baeuerle@allegion.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: zynqmp: add support for Xilinx ZCU104 board ...

Add support for the Xilinx Zynq Ultrascale+ MPSoC architecture (ZynqMP)
and the Xilinx ZCU104 board.

Barebox is booted as BL33 in EL-1 and expects that a BL2 (i.e. the FSBL)
already took care of initializing the RAM. Also for debug_ll, the UART
is expected to be already setup correctly. Thus, you have to add the
Barebox binary to a boot image as described in "Chapter 11: Boot and
Configuration" of "Zynq Ultrascale+ Device Technical Reference Manual".

Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: phytec-som-imx6: Add full featured phyCORE-i.MX 6ULL ...

The phyCORE-i.MX 6ULL now comes in a full featured (Y2 variant) and a
low cost (Y0 variant) version. The main difference for the barebox is
the missing second USB OTG port on the Y0 variant and the RAM configuration.

So to account for these differences the existing low cost version is
renamed and the full featured version added.

The results are following phyCORE-i.MX 6ULL modules:

phyCORE-i.MX 6ULL low cost:
	- i.MX 6ULL Y0
	- 256 MB RAM
	- NAND
	- Ethernet 10/100 MBits
	- USB OTG

phyCORE-i.MX 6ULL full featured:
	- i.MX 6ULL Y2
	- 512 MB RAM
	- NAND
	- Ethernet 10/100 MBits
	- USB OTG
	- USB Host

Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: images: use piggydata ...

The way we assemble the multi images on ARM is rather complicated and
error prone. We currently cat the compressed barebox image behind the
PBL executable and need some magic to obtain the size of the payload and
also have to do tricks to reliably get a pointer to the compressed
image.

This patch switches over to compile the compressed payload into the PBL
image itself which has proven to work for the single PBL case and for
the ARM Linux Kernel aswell.

The goal is to unify the single PBL and the multi PBL cases together in
the future to get an easier startup path for ARM.

This patch has been tested on the i.MX53 QSB, i.MX53 Vincell, Beaglebone
black (both MLO and 2nd stage) and a Phytec phyFLEX i.MX6 board.

SoCFPGA Arria10 has also be changed slightly with this patch. We used to
generate a single image (barebox-socfpga-achilles.img) which was
used as xload image and full image. We now instead generate two images:
barebox-socfpga-achilles-xload.img and barebox-socfpga-achilles.img, the
former loaded by the ROM and the latter loaded by the xload image.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX: GuF Vincell: Use DCD table to setup SDRAM ...

This patch removes the xload mechanism to configure SDRAM and instead
installs a DCD table. The DCD table has been generated from the FSL
DDR3 script aid Excel sheet (version 0.0.1). The calibration values
were taken from a calibration run with the barebox internal functions.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/rpi3'

Merge branch 'for-next/imx'

ARM: i.MX: Add liteboard support ...

liteboard is a development board which uses liteSOM as its
base. liteSOM can't exist on its own, but is used as part
of other boards - it only contains processor and memory.

Hardware specification:
 * liteSOM:
   - i.MX6UL
   - 256M or 512M DDR3 RAM
   - eMMC (uSDHC2)
 * Ethernet PHY
 * USB host (usb_otg1)
 * MicroSD slot (uSDHC1)

Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: rpi: add raspberry pi 3 support ...

This adds basic support at the same feature level as the other
supported raspberry pi boards.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Roland Hieber <r.hieber@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: at91: Add initial support for the EVB-KSZ9477 eval board ...

The EVB-KSZ9477 is an evaluation board for the KSZ9477 ethernet switch.
This board is equipped with a atsama5d3 SoC with 256MiB of SDRAM, 256MiB
of NAND flash and a SD card slot.

For now only second stage booting is supported with AT91bootstrap as
first stage loader.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

i.MX: Add support for ZII's i.MX7D-based RPU2 board ...

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/mxs'

Merge branch 'for-next/imx-hab'

images: imx: Add targets for signed encrypted images ...

Add .esimximg and .esimximg.dek targets for signed and encrypted
images and their corresponding DEKs. Also add rule to generate final
.img.dek files.

As an example, adding encrypted images for imx6ull_evk would look like
this:

  FILE_barebox-nxp-imx6ull-evk-encrypted.img = start_nxp_imx6ull_evk.pblx.esimximg
  image-$(CONFIG_MACH_NXP_IMX6ULL_EVK) += barebox-nxp-imx6ull-evk-encrypted.img

  FILE_barebox-nxp-imx6ull-evk-encrypted.img.dek = start_nxp_imx6ull_evk.pblx.esimximg.dek
  image-$(CONFIG_MACH_NXP_IMX6ULL_EVK) += barebox-nxp-imx6ull-evk-encrypted.img.dek

Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>